High Polymers

Properties: TH-3100 is a good scale inhibitor and dispersant for cool water treatment, it has good inhibition for dry or hydrated ferric oxide. TH-3100 is a all organic dispersant and scale inhibitor, it can be also used as stabilizer of corrosion inhibitor for phosphate and phosphinic salt. (Similiar to RohmHaas ACUMER 3100) Specification: items index Appearance Light amber liquid Solid content % 43.0-44.0 Density (20?)g/cm3 1.20 min pH(1% water solution) 2.1-2.6 Usage: TH-3100 can be used as scale inhibitor for circulating cool water and boiler water, for phosphate, zinc ion and ferric in particular. When used alone, the dosage of 10-30mg/L is preferred. When used in other fields, the dosage should be determined by experiment. Package and Storage: Normally In 250kg net Plastic Drum, IBC drum can also be used as required.Storage for ten months in room

Properties: TH-2000 is the copolymer of acrylic-acrylate-sulfosate, it is a good scale inhibitor for calcium phosphate, calcium carbonate and other inorganic minerals. TH-2000 can effectively stabilize calcium phosphate in formula containing phosphate. It can also stabilize zinc in formula containing zinc. It can disperse inorganic microparticles without pH influence. TH-2000 is an effective dispersant in all organic water treatment formula, it can be used as dispersant for minerals, stabilizer for calcium phosphate. (similiar to RohmHaas Co. ACUMER 2000) Specification: items index Appearance Light amber liquid Solid content % 42.5-43.5 Density (20?)g/cm3 1.21 min pH(1% water solution) 3.8 - 4.6 Usage: TH-2000 can be used as scale inhibitor for circulating cool water and boiler water, for phosphate, zinc ion and inorganic minerals in particular. When used alone, the dosage of 10-30mg/L is preferred. When used in other fields, the dosage should be

Properties: TH-613 is a scale inhibitor and dispersant containing sulfosate and polyelectrolyte. In this copolymer, there exists strong acid, weak acid and non-ion group, it is suitable to be used in high temperature, high pH, high hardness and high alkaline. TH-613 has good scale inhibition for ferric oxide, calcium phosphate, zinc phosphate and calcium carbonate. It has good synergic effect with polyphosphate, zinc salt and other agents. TH-613 can be used as scale inhibitor and dispersant in industrial circulating water system, oilfield refill water system and boiler water. Specification: items index Appearance Colorless or light yellow transparent liquid Solid content % 28.5 min Free monomer (CH2=CH-COOH)% 1.0 max Density (20?)g/cm3 1.10 min pH(1% solution) 4.0-5.0 Usage: The dosage of 2~40mg/L is preferred depended on water quality and process. Package and Storage: 25kg or 200kg in plastic barrel. Storage for ten months in room shady and

Properties: Through the introduction of phosphonic group into carboxylic group, PCA has good dispersion property for scale of calcium carbonate and calcium phosphate in circulating cool water system. It has good scale inhibition for barium sulfate, strontium sulfate and silica scale. PCA has advantages in wide range of water quality, chemical stability, strong chlorine tolerance, etc. PCA can be used as scale and corrosion inhibitor in circulating cool water system and oilfield refill water system. Specification: items index Appearance Colorless or light yellow liquid Solid content % 50.0 min Total phosphor (as PO43-)% 0.5 min Density (20?)g/cm3 1.20-1.30 pH(1% water solution) 3.0-4.0 Usage: When used alone, the dosage of 5-20mg/L is preferred. It can also be used together with organophosphines, copolymer, zinc salt or BTA. Package and Storage: Normally In 250kg net Plastic Drum, IBC drum can also be used as required.Storage for ten months i

Properties: TH-241 is copolymer of carboxylic group, hydroxylic group and sulfonic acid group, it has good scale inhibition performance to calcium phosphate and calcium carbonate. TH-241 has good synergic effects with other agents. TH-241is used as scale inhibitor and dispersant in circulating cool water system and built with organophosphate. Specification: items index Appearance Colorless or light yellow viscous liquid Solid content % 35.0 min Free monomer (CH2=CH-COOH)% 0.5 max Density (20?)g/cm3 1.1~1.2 pH(1% water solution) 3.0~5.0 Usage: Normally, the dosage of 5~25mg/L is preferred. When built with organophosphates, the dosage of 1-10mg/L is preferred, the suitable pH value is 7.0-9.5. Package and Storage: Normally In 250kg net Plastic Drum, IBC drum can also be used as required. .Storage for one year in room shady and dry place.

Properties: T-225 is copolymer of polyacrylic acid and hydroxypropyl acrylate, it has good scale inhibition and dispersion properties to calcium phosphate and calcium carbonate, it has good dispersion properties to ferric oxide sludge, clay and grease. T-225can be used under high pH situation and has good compatibility with other organophosphines and BTA, T-225 can effectively withhold sediments of zinc salt and calcium phosphate, it has good scale inhibition and dispersion properties under high temperature and alkaline situations. Usage: T-225 can be used in circulating cool water system in situation of alkaline and excess of phosphate. It can be used as scale inhibitor and dispersant for heater, none-column evaporator boiler, circulating cool water and oilfield dirty refilling water with high calcium content. The dosage of 10~30mg/L is preferred. It can be built with organophosphines to form full organic alkaline formula. Package and Storage: Normally In 200kg net Plastic Drum,

Properties: AA/AMPS is the copolymer of acrylic acid and 2-acrylanmido-2-methylpropanesulfonic acid (AMPS). Due to including carboxylic group (scale inhibition and dispersion) and sulfonic acid group (strong polarity) in this copolymer, AA/AMPS has high calcium tolerance and good scale inhibition for calcium phosphate, calcium carbonate and zinc scale. When built with organophosphines, the synergic effect is obvious. AA/AMPS is suitable to be used in water quality of high pH and high alkaline, it is one of the ideal scale inhibitor and dispersant on high concentration index. Specification: items index Appearance Colorless or light yellow viscous liquid Solid content % 40 min Free monomer (as AA)% 0.8 max Density (20?)g/cm3 1.15 min pH(1% solution) 3.5-4.5 Viscosity mpa.s 90-200 Usage: AA/AMPS can be used as scale inhibitor and dispersant in open circulating cool water system, oilfield refill water system, metallurgy system and iron & steel p

Properties: MA/AA is a low molecular weight polyelectrolyte, a copolymer of maleic anhydride and acrylic acid. It has good dispersant performance against carbonate and scale inhibition for phosphate. it has good thermal stability, can be used under high temperature (300?). MA/AA has good compatibility when used together with other agents. MA/AA is widely used in low-pressure boiler, centralized heating, centralized air-conditioner and circulating cool system. It can also be used as chelating dispersants in woven and dyeing fields. Usage: MA/AA is used in circulating cool water system, medium or lower pressure boiler and distillation system in which high temperature is usually encountered. MA/AA can be used alone or together with other organic phosphates. When used together, the dosage of 2-10mg/L is preferred. The dosage for use as woven & dyeing and accessory detergent should be determined by experiments. Package and Storage: Normally In 250kg net Plastic Drum, IBC drum can

Properties: PAAS is innoxious and soluble in water, it can be used in situations of alkaline and high concentration without scale sediment. PAAS can disperse the microcrystals or microsand of calcium carbonate, calcium phosphate and calcium sulfate. PAAS is used as scale inhibition and dispersant for circulating cool water system, papermaking, weave, dyeing, ceramic, painting, etc. Specification: items index Appearance Colorless or light yellow transparent liquid Solid content % 30 min Free monomer (CH2=CH-COOH) % 0.5 max Density (20?)g/cm3 1.15 min pH(1% solution) 6.0~8.0 Notes: Solid content 40%, 45% and 50% are also available Usage: PAAS can be used as scale inhibitor and dispersant in circulating cool water systems in power plants, iron & steel factories, chemical fertilizer plants, refineries and air conditioning systems. Dosage should be in accordance with water quality and equipment materials. When used alone, 2-15mg/L is preferred. When used as dispersant,

Properties: PAA is innoxious and soluble in water, it can be used in situations of alkaline and high concentration without scale sediment. PAA can disperse the microcrystals or microsand of calcium carbonate, calcium phosphate and calcium sulfate. PAA is used as scale inhibitor and dispersant for circulating cool water system, papermaking, weave, dyeing, ceramic, painting, etc. Specification: items index Appearance Colorless or light yellow transparent liquid Solid content % 30 min Free monomer (CH2=CH-COOH) % 0.5 max Density (20?)g/cm3 1.09 min pH(1% solution) 3.0 max 40%, 50% PAA are also supplied. Usage: PAA can be used as scale inhibitor and dispersant in circulating cool water systems in power plants, iron & steel factories, chemical fertilizer plants, refineries and air conditioning systems. Dosage should be in accordance with water quality and equipment materials. When used alone, 1-15mg/L is preferred. Package and Storage: Normally In 200kg net Plastic Drum,

Properties: White crystals, M.P.210°C, soluble in the water tinily, insoluble in ethanol,propanone,ether,benzene etc(including some organic solvents).Can be produced salt by reaction with alkali,amine. Specification: Item Specification Appearance Neutral crystalline powder PMIDA Titer 98%Min Loss on Drying 0.5%Max Alkali-base insoluble content 0.2 % Max Usage Mostly be used as the intermediate to produce the efficiently,harmfulless herbicide(glyphosate). And glyphosate can be used to kill all kinds of weed in glebe. Packing: 25kg net woven bags or according to the client's request.

Properties: The main composition of dispersant TH-904 is anion polymer. It can adsorb on surface of microparticles resulting in static repulsion, resulting in disperse and preventing sedimentation and coarse turn-back. TH-904 is little foaming, innocuous, non-corrosiveness and non-hazardous. TH-904 is used as chelant in papermaking coating, building coating, concrete retarder, water reducer, woven and dyeing. Its performance can reach to that of SN-5040. Adding TH-904 to slurry during grinding process of bolus alba, lime carbonate, pottery clay, titanium pigment, French chalk, barium sulfate, coal-water slurry, etc., the viscosity can be largely reduced and the dispersed slurry is stable. Specification: items index Appearance Colorless to light yellow viscous liquid Solid content % 40.0 min pH value (2% water solution) 8.0~11.0 Density (20?)g/cm3 1.20 min Viscosity(25?)mpa.s 200—600 Usage: The dosage of 0.2-2% is preferred (solid/solid), the

Properties: PASP(Sodium of Polyaspartic Acid) is a water soluble polymer. It is a green water treatment agent, with properties of non-phosphor, non-nitrogen, non-pollution and fully biodegradation. PASP(Sodium of Polyaspartic Acid) has good scale inhibition on calcium carbonate, calcium sulfate, barium sulfate, calcium phosphate, etc.. Its scale inhibition rate for calcium carbonate is 100%. Moreover, PASP(Sodium of Polyaspartic Acid) has dispersion and corrosion inhibition properties to metal equipment. PASP(Sodium of Polyaspartic Acid) is an alternative of phosphor-containing Water Treatment Chemicals, avoiding water system eutrophication and second pollution. Specification: Appearance: Amber transparent liquid Solid content %: 40.0 min Density (20 centigrade)g/cm3: 1.2 min pH(1% water solution): 9.0-11.0 Usage: PASP(Sodium of Polyaspartic Acid) can be used as scale and corrosion inhibitor in industrial circulating cool water system, boiler water, reverse osmosis,

Properties: Through the introduction of phosphonic group into carboxylic group, PCA(Copolymer of Phosphono and carboxylic Acid) has good dispersion property for scale of calcium carbonate and calcium phosphate in circulating cool water system. It has good scale inhibition for barium sulfate, strontium sulfate and silica scale. PCA(Copolymer of Phosphono and carboxylic Acid) has advantages in wide range of water quality, chemical stability, strong chlorine tolerance, etc. PCA(Copolymer of Phosphono and carboxylic Acid) can be used as scale and corrosion inhibitor in circulating cool water system and oilfield refill water system. Specification: Appearance: Colorless or light yellow liquid Solid content %: 50.0 min Total phosphor (as PO43-)%: 0.5 min Density (20 centigrade)g/cm3: 1.20-1.30 pH(1% water solution): 3.0-4.0 Usage: When used alone, the dosage of 5-20mg/L is preferred. It can also be used together with organophosphines, copolymer, zinc salt or BTA. Package and

Properties: AA/AMPS(Acrylic Acid-2-Acrylamido-2-Methylpropane Sulfonic Acid Copolymer ) is the copolymer of acrylic acid and 2-acrylanmido-2-methylpropanesulfonic acid (AMPS). Due to including carboxylic group (scale inhibition and dispersion) and sulfonic acid group (strong polarity) in this copolymer, AA/AMPS(Acrylic Acid-2-Acrylamido-2-Methylpropane Sulfonic Acid Copolymer ) has high calcium tolerance and good scale inhibition for calcium phosphate, calcium carbonate and zinc scale. When built with organophosphines, the synergic effect is obvious. AA/AMPS(Acrylic Acid-2-Acrylamido-2-Methylpropane Sulfonic Acid Copolymer ) is suitable to be used in water quality of high pH and high alkaline, it is one of the ideal scale inhibitor and dispersant on high concentration index. Specification: Appearance: Colorless or light yellow viscous liquid Solid content %: 40 min Free monomer (as AA)%: 0.8 max Density (20 centigrade)g/cm3: 1.15 min pH(1% solution): 3.5-4.5 Viscosity m

Properties: MA/AA(Copolymer of Maleic and Acylic Acid) is a low molecular weight polyelectrolyte, a copolymer of maleic anhydride and acrylic acid. It has good dispersant performance against carbonate and scale inhibition for phosphate. it has good thermal stability, can be used under high temperature (300 centigrade). MA/AA(Copolymer of Maleic and Acylic Acid) has good compatibility when used together with other agents. MA/AA(Copolymer of Maleic and Acylic Acid) is widely used in low-pressure boiler, centralized heating, centralized air-conditioner and circulating cool system. It can also be used as chelating dispersants in woven and dyeing fields. Specification: Appearance: Clear brown liquid amber transparent liquid Solid content % :48 min 50 min Free monomer (MA) % :9.0 max 5.0 max Density (20 centigrade)g/cm3 :1.18 min 1.18min pH(1% solution) :2.0~3.0 2.0±1.0 Usage: MA/AA(Copolymer of Maleic and Acylic Acid) is used in circulating cool water system, medium

Properties: HPMA(Hydrolyzed Polymaleic Anhydride) is a low molecular weight polymeride, with average molecular weight 400-800. No toxicity, soluble in water, high chemical and thermal stability, decomposed temperature above 330 centigrade. HPMA(Hydrolyzed Polymaleic Anhydride) has obvious threshold effect under high temperature (350 centigrade) and high pH(8.3)level, suitable to be used in alkaline water system or built with agents. It has good scale inhibition against carbonate and phosphate scales under temperature 300 centigrade with effective time as long as 100 hours. Due to its good scale inhibition and high temperature tolerance properties, HPMA(Hydrolyzed Polymaleic Anhydride) is widely used in desalination plant of flash vaporization equipment, low pressure boiler, steam locomotive, crude oil evaporation, petroleum pipeline, and industrial circulating cool water systems. In addition, HPMA(Hydrolyzed Polymaleic Anhydride) has good corrosion inhibition effect when used together

Properties: PAA(Polyacrylic Acid) is innoxious and soluble in water, it can be used in situations of alkaline and high concentration without scale sediment. PAA(Polyacrylic Acid) can disperse the microcrystals or microsand of calcium carbonate, calcium phosphate and calcium sulfate. PAA(Polyacrylic Acid) is used as scale inhibitor and dispersant for circulating cool water system, papermaking, weave, dyeing, ceramic, painting, etc. Specification: Appearance Colorless or light yellow transparent liquid Solid content % 30 min Free monomer (CH2=CH-COOH) % 0.5 max Density (20 centigrade)g/cm3 1.09 min pH(1% solution) 3.0 max 40%, 50% PAA(Polyacrylic Acid) are also supplied. Usage: PAA(Polyacrylic Acid) can be used as scale inhibitor and dispersant in circulating cool water systems in power plants, iron & steel factories, chemical fertilizer plants, refineries and air conditioning systems. Dosage should be in accordance with water quality and equipment materials. When u

Acrylic Acid-2-Acrylamido-2-Methylpropane Sulfonic Acid Copolymer (AA/AMPS) CAS 40623-75-4 Properties: AA/AMPS is the copolymer of acrylic acid and 2-acrylanmido-2-methylpropanesulfonic acid (AMPS). Due to including carboxylic group (scale inhibition and dispersion) and sulfonic acid group (strong polarity) in this copolymer, AA/AMPS has high calcium tolerance and good scale inhibition for calcium phosphate, calcium carbonate and zinc scale. When built with organophosphines, the synergic effect is obvious. AA/AMPS is suitable to be used in water quality of high pH and high alkaline, it is one of the ideal scale inhibitor and dispersant on high concentration index. Specification: Appearance Colorless or light yellow viscous liquid Solid content % 40 min Free monomer (as AA)% 0.8 max Density (20?)g/cm3 1.15 min pH(1% solution) 3.5-4.5 Viscosity mpa.s 90-200 Usage: AA/AMPS can be used as scale inhibitor and dispersant in open circulating cool water system, oi

This kind of product is white amorphous powder. Its specific gravity is 1.35~1.46(0C). It can’t be dissolved in water, alcohol and gasoline, but can be expended in ether, ketone, fatty hydrocarbon chloride, acetone, cyclohexanone and aromatic hydrocarbon.