Kitchen Appliances

Features, 1) The product uses super heat conduction pipe and has a good effect of heat exchange. 2) Collector separates with the storage tank. The tank can be put anywhere of the house . 3) The pipe is made of purple copper and conducted by heat transfer medium liquid; water can't flow in the vacuum tubes and is operated when controlled. 4) Intelligent control and automatic operation. 5) The insulation layer uses the up-to-date technology and has a good effect of temperature preservation. 6) The equipment of separated solar water heater is composed by heat collector, storage tank, controller, working station and installation parts. 7) Multifunction: water for bathing, washing, cooking and so on Features, 1) Collector size: 130mm x 130mm 2) Vacuum tube: 1,500mm /dia. 47, 12pcs/set or 24pcs/set 3) Vacuum tube: 1,800mm / 58, 15pcs/set, 20pcs/set or 30pcs/set 4) Tank: 150L, 200L, 300L 5) Outer-tank SS430, Inner-tank SS430-2B, Bracket, Zinc stencil plating, insulation mater

Features: 1) Temperature Control 2) High-temperature protection 3) Three band power selection 4) Digital Screen Display 5) Low pressure to start up 6) Putting through power when start water supply 7) Cutting Power automatically when no water supply

Features: 1) Shell design in bevel edge,stream line figuration,pleasing to both the eye and the mind. 2) Completely automatic controls 3) Power turns off automatically after 20 minutes 4) High efficiency and energy saving 5) Low water pressure to start 6) Rear water control 7) Convenient to use 8) Multi protection functions: a) Over heating b) Flame failure c) High water pressure d) Frost

Features: 1) Large hot water capacity/central water supply system 2) Microcomputer controls the constant temperature 3) Temperature range within 32~75°C 4) Moduiation gas system. 5) High efficiency and energy saving combustion system 6) Digital display controller 7) Low noise,Low water pressure to start 8) Super thin construction 9) Multi protection functions: a) Low voltage b) High temperature and over heating c) Flame failure d) High water pressure e) Frost Dimensions: 658 x 360 x 155mm

Features: 1) Super streamline construction 2) High efficiency and energy saving 3) Power turns off automatically after 20 minutes 4) Completely automatic controls 5) Convenient to operate 6) Low water pressure to start 7) Rear water control 8) Multi protection functions: a) Over heating b) Flame failure c) High water pressure d) Frost e) Low voltage f) Low oxygen 9) Double water entrance and exit available 10) Dimensions: 380 x 235 x 128mm

-Shell design in arc.round and fleshy lines,noble and elegant. -Completely automatic control by water convenient to use. -High efficiency and saving energy

Features: 1) Elegant and smooth construction 2) Completely automatic controls 3) Power turns off automatically after 20 minutes 4) High efficiency and energy saving 5) Low water pressure to start 6) Rear water control 7) Convenient to use 8) Multi protection functions: a) Over heating b) Flame failure c) High water pressure d) Frost

Qty:1pc N.W.:10kg G.w.:11kg Measurement:460*435*860mm 20' FT:160pcs,40' GP:340pcs,40' HQ:408pcs 1)With Oxygen Depletion Safety Device,anti-tilt device&flame failure safety device 2)Radiant Heating system.Heat uniformly and speedily 3)Three stages' Power adjustment. 4)Cylinder can be put in heater cabinet.Easy moving. 5)Piezo Ignition,Exhaust directly,suitable for LPG. 6)Provide the hot area:20-80C 7)Hot burden:4.2,2.8,1.4 8)Consume the tolerance:0.3,0.2,0.1

Features: 1) Large hot water capacity/central water supply system 2) Microcomputer controls the constant temperature 3) Temperature range within 32~75oC 4) Modulation gas system 5) Digital display controls 6) High efficiency and energy saving combustion system 7) Intelligent alarm system 8) Advanced exhaust system 9) Low noise 10) Low water pressure to start 11) Super thin construction 12) Multi protection functions: a) Automatic power off when low voltage b) High temperature and over heating c) Flame failure d) High water pressure

Features: 1) Modified European technology to meet the different requirements in China 2) Constant shower temperature 3) Built-in temperature sensor 4) When initial operating sensor fails a standby will start up automatically 5) Intelligent operation panel imported from the USA 6) Timer controlled temperature to save money and gas 7) 4 different temperature settings

Features: 1) Low water pressure starting, large flow design and effective environment protection and energy-saving 2) Overheat protection device, dry burning resistant protection device and stream stabilizer 3) Adopting accidental flameout protection device, high sensibility ion induction technique and full control design for water, power and gas

Features: 1) Rated input power: 18kW / 26kW 2) Heating temperature range: 30 - 80°C 3) Shower temperature range: 35 - 60°C 4) Heating system pressure:0.05 - 0.3mpa (80%) 5) Expansion water tank volume: 7L / 8L 6) Heating system max water volume: 145L / 165L 7) Rated hot water capacity: 9 - 13kg/min (25°C) 8) Suitable water pressure: 0.015mpa~0.8mpa 9) Dimensions:720 x 340 x 320mm / 720 x 410 x 320mm 10) Rated power supply voltage: AC 220V / 50Hz Packing: N.W.: 35kg G.W.: 37kg Optimize european technology Amend European technology standard to meet the different reqirements in China Constant shower temperature According to different requirements,the water temperature can be adjusted at will. Built-in button temperature sensor probe Built-in adjustment button.the boby is in one integrated mass.simple and nature. Unique double temperature sensor probe Yse double temperature sensor probe to control.Once the operating sensor does net run well.the standb

Features: 1) Inner and outside water tank shell: made of AISI 3042B food grade stainless steel plates welded by argon arc 2) Water: pure and drinkable 3) Heat insulation of water tanks: adopts polyurethane foam, (thickness: 55mm)

It applies the latest ''KRD-winding-pipes technology'' and developed by several international well-known energy research professionals of USA Yu Kun Bei Solar Energy Using Research Institution based on KRD technology, improve the disadvantages of traditional solar water heater such as limited heat water, small water output, taking time to heat and worse water quality and successfully develop the technology of "secondary heat exchange", which can integrate high temperature, high efficiency with fast circulation of heat water perfectly. Bubugao series products are in the cutting edge of solar application industry. Features: 1. The 50m long copper coil is applied as the flow channel 2. The hot water is pushed out by the pressure the cold water 3. The temperature keeps stable 4. The installation place is not affected by the outlet of the hot water

Specifications: 1) Outer tank material: SUS 304 stainless steel 2) Inner tank material: stainless steel 3) Insulation: foam 4) Support frame: stainless steel 5) Reflector board: stainless steel 6) Vacuum tube Inner packing: Bubble polybag/blister card Outer packing: Export carton

1) Natural, graceful and magnificent appearance 2) Sapphire gold silicon inner: 2.0mm high-quality steel plate, single welded, enamel tank, good toughness, high strength, resistant to corrosion and water scale, prolongs it's service life 3) Adopts imported stainless steel "twin tube" heating pipe, high thermal conductance insulation, resistant to corrosion 4) Ultra thick, micro hole polyurethane foaming technique, superior thermal retardation, power/energy saving 5) Mechanical display, controlling and adjusting of temperature 6) Three bands power for selection 7) Electricity leakage protection device (or without) 8) Over temperature protection device 9) Over pressure protection device 10) Separate dirt-drainage, magnesium bar for purity, innovative and individuated design, can be changed freely Packing: 1pc/ctn General carton box

1) Unique appearance, innovative and individuated design as the leading of trend 2) Site type, very convenient for installation and safety, artistic 3) Sapphire gold silicon inner: 2.0mm high-quality steel plate, single welded, wet enamel tank, good toughness, high strength, resistant to corrosion and water scale, prolong it's service life 4) Adopt imported stainless steel "Twin tube" heating pipe, high thermal conductance insulation, resistant to corrosion. 5) Ultra thick, micro hole polyurethane foaming technique, superior thermal retardation, power / energy saving 6) Mechanical display and controlling and adjusting of temperature 7) Electricity leakage protection device (or without) 8) Over temperature protection device 9) Over pressure protection device 10) Magnesium bar for purity

Features: 1) 10L capacity, super-mini-body design, novel and luxurious appearance, adding taste to your life 2) Titanium liner adopts imported superior steel plate (enamel tank single weld), good toughness, high strength, strong resistant to corrosion and water scale, prolongs its service life 3) Adopts imported high thermal conductance insulation, "twin tube" heating pipe, resistant to corrosion and prolong it's service life 4) 1,500W rated power, instant heating, heat up the water temperature to 30oC in 6.5 minutes 5) Mechanical display, controlling and adjusting of temperature 6) Automatic control: automatic replenish cold water, automatic heating, automatically cut-off electric thermal retardation 7) Multiple protective devices against overheating, electric shock thoroughly, high water pressure water leak switch (over pressure) 8) Magnesium bar for purity Packing: Gift box or general carton box 1pc/ctn

Features: 1) Mechanical display and controlling and adjusting of temperature 2) Titanium liner (enamel tank), good toughness, high strength, resistant to corrosion and water scale, prolong its service life 3) Adopt imported "Twin-tube" heating pipe, high efficiency, high insulation, high thermal conductance and resistant to corrosion 4) Adopt professional static electricity technology, it will be cleaned easily, it is as new only wipe lightly 5) Multiple protection devices against overheating, over pressure and so on 6) 20mm of polyurethane insulating layer for keeping warm 7) Magnesium bar for purity 8) 1,500W rated power, instant heating, increase the water temperature of 30°C in 6.5 minutes 9) Super-mini-body design, novel and luxurious appearance 10) Automatic control: automatic replenish cold water, automatic heating, automatically cut-off electric thermal retardation Packing: 1pc/ctn

Features: 1) Streamline fashionable appearance, adopt slap-up car spray-paint techniques 2) Adopts imported stainless steel "twin-tube" heating pipe, realizing isolation between water and electricity 3) Sapphire gold silicon inner: resistant to rust, corrosion, water scale and leakage 4) Rated power: 1,500W/2,000W 5) Multiple protection devices against overheating, electricity-leakage and over pressure 6) 20mm polyurethane insulating layer for keeping warm 7) Magnesium bar for purity 8) Separate dirt-drainage Outer packing: 1pc/ctn