Sensors

Model No.: AL-236T/238T/2316T AL-236T/238T/2316T control panel is design for professional application in intelligentcommunity, intelligent building, bank, station, airport, school or some other commercialor residential locations, providing maximum flexibility for variable environment.They accommodate a wide range of partitioning schemes and detection devices,including fire, motion, acoustic, glass break detector and so on. Besides, AL-236T/238T/2316T control panel is easy to install with a full range ofaccessories designed for performance and durability. AL2366 wireless module, AL2388relay association module, AL-GPRS9000 GPRS Short Message Module and AL-IP8000/23LAN Module will allow you to experience the convenience brought by the innovativetechnology.Features:6/8/16 wired zonesIntegrated phone number dialer Compatible with 6-zone wireless moduleConnected to central station by LAN, GSM, PSTNRF remote controller availableMulti-protocol like 4+2, CFSK supportable8-zone relay association

Tell us the code of AC sensor,we can supply the same model to you without AC brand.Exciting price for air compressor manufacture.

Features:q      Various configurationq      Moisture proof,dew proof,leakage proof, Full closed circuitq      High accuracy,and well stabilityBenefit:q      Suitable for the level measuring of petroleum chemical,metallurgy,irrigation works,hydrology reconnoitering etc.Specification sheetModelPT124B-220Ranges  0~1mH2O~200mH2OProfileRigid stemCombined accuracy0.25%FS, 0.5%FS1.0%FSSignal output4-20mA;0-5VOperating temperature-40~125

PT124B-210 Series industrial pressure transmitter adopt high performance chips, and deal with the special amplified chip, integrative configuration, and smart profile, they are widely used in the field of hydraulic pressure, medicament and sanitation, constant pressure water supply system and so on.

The PT124G-141 Series melt pressure transducer is ideal for space restricted areas applications required, where mounting space is limited. It also has a free spinning jam nut that simplifies installation. The PT124G comes equipped with six or eight pin bendix connector. It can be interchangeable with the similar world standard products. It is suitable to measure and control the melt pressure of chemical fibre equipment, rubber and plastic machine and so on.

PT124G-285SP series diaphragm pressure gauge adopts high performance bourdon tube, designed with special shockproof configuration, high pressure endurance, it is suitable for the process pressure measuring of the petroleum, chemical industry, pharmacy, foodstuff machine and so on.

The PT124B-112 Series melt pressure transmitter convert process pressure into an amplified signal for long distance transmission free of noise interference. It can provide various signals as 4/20mA, 0/5V, 0/10V and optional, and directly input upper control system.

PY602/PY602H/PY602S Pressure&Temperature Indicator ManualPY602 pressure indicator is a 1/8 DIN or ¼ DIN, panel-mount, dual 4-digit indicator, which takes the advantage of latest state-of-art technology and comes in small-size, light-weight and in low-power. This pressure indicator has been specifically designed for use with mv/Volt output transducers from different famous manufacturers such as Dynisco, Gefran, ONEhalf20 and so on. Together with the mv/Volt transducers and thermocouple, PY602 Pressure Indicator can be working as the high precision pressure and temperature measurement. PY602 Pressure indicator displays the pressure and temperature and outputs the control relays timely.PY602/PY602H Indicator Specification (1) Display Dual 4-digit Green and Red LEDs (2) Resolution 0.2% FSO ± 1 (3) LEDs Out, Alarm-1, Alarm-2, CALibration (4) Input Sensibility 2.5mv/V or 3.3 mv/V (automatic selection) (5) Sampling Speed 20 per second (6) Excitation Voltage +9 VDC (output to

 The PT124G-123 Series melt pressure transducer is ideal for melt pressure applications requiring simple installation, repeatability and reliability. The PT124G Series provide diversiform signal optional, The PT124G come equipped with six or eight pin bendix connector. It can be interchangeable with the similar international products. It is suitable to measure and control the melt pressure of chemical fibre equipment, rubber and plastic machine and so on.

Zonzen 80 series hand-set thermometers are digital ones with micro PC being applied. They adopt 60mm×50mm large-screen LCD for display and double 4 1/2-digit monitors can display any combination of T1, T2. and T1-T2. plus 24 hours display of relative time, two channels of temperature signals can be measured at the same time shows. Up to 500 points of measurement data can be recorded and the record intervals are adjustable.1. The minimum and maximum values with relative time marks provide time reference for main events.2. Measuring of K, J, T, E, S, N-type thermocouple and thermal resistance pt1003. Temperature accuracy ±0.3%+0.5 4. Screen Resolution0.1, 0.1 (<2000)     1, 1 (≤2000)5. RS232 communication port

AccuracyResponse timeCalibrationTolerance (1554)Max. Temp.Protection CapMore than 98%2s5sS: Pt/10%Rh-Pt1.5 1760  Paper CapPaperR: Pt/13%Rh-Pt 1760 metal cap Al B: Pt/30%Rh-Pt/6%Rh 4 1820 Cu Fe Protection tubeOD(mm)ID(mm)Length(mm)MaterialPaper tubeΦ29 Φ33Φ17.2Φ18275575775875975107511751540PaperΦ35Φ23.5840Φ43Φ28.41180Non-splash tubeΦ29Φ185757008751165Al2SiO­33Φ43Φ28.41180

British type, German type ,French type,  America type

Mineral cable ( MI cable ) be used to make thermocouple. we can supply you type K, J, E, AND T.

Feature 1 JS series digital display timing meter has the merits of displaying accurately and clearly, digital dialer setting conveniently, high control accuracy, large range of its delay time, excellent anti-disturbance capability, complete specification, etc. It can be used widely in metallurgy, machinery, power supply, chemical engineering, light industry, mine, medical treatment and so forth, to act as time delay, time display and control on timing. Feature 2 1. Mounting kind: panel insert kind or socket mounting kind. 2. Contact capability: AC220V, 3A ( resistance load) 3. Count life time: ≥10 ten thousands times. 4. Deviation in the time counting: ≤± 0.1% 5. Ability in anti-disturbance: 3 class (IEC-801) 6. Power supply: 85~110% of the rating power supply voltage 7. Power supply voltage: alternative current 12V, 24V, 36V, 110V, 220V, 360V/50Hz, direct current 12V, 24V. 8. Power consumption: ≤4.5W 9. Operating environment: temperature -5º C~40º C, relative

The specification of JTC-903 type temperature controller please see as follow: Input signal: Thermocopule K, J type Accuracy: ± 1. 5% F. S Control way: Time rated adjustment Control output: Relay Work power: AC110V/220V 50/60Hz Out dimension (W*H*D): 96× 96 × 120mm Install dimension: 92+1× 92+1mm

The function of TEH-P/C series intelligent double digital indicating controller please see as follow: · Imitate digital filter waves · Red and green numerical tubes display pv and sv simultaneously · Digital PID adjustment, all data input from panel procedure · Function of sensor revising. · Software control full range from 0, no protentiometer. · Manual/automatic switchover contorl without interference. · Function of second class data lock protection. · Self adaptation, self adjustment.

Screw thermocouple ( flexible themocouple ) can be used to connect the temperature controller to measure the temperature of machine equipment.

Stainless steel armor tube with cap be used to make flexible thermocouple.

Spring bayonet with cap be used to make flexible thermocouple, we can supply you different size as your requirement.

Thermocouple alloys of type KX (CHROMEL-ALUMEL) mainly be used to make thermocouple extension wire and thermocouple wire. Thermocouple is the most adapted method for measuring temperatures, sometimes the only available method. Thermocouples are among others used for nuclear reactors, nuclear submarines, jet aero engines, industrial furnaces and other industrial heat treatment (measurement and control of temperature). Thermocouples can be created with various combinations of alloys. Our thermocouple alloys wire can be used to measure temperatures.