Solar and Recycling Energy

BSL2.2-3.6OA 1?Module: 160W-200W Solar Module, laminating and curing four modules at the same time. 2?Module:240W-280W Solar Module, laminating and curing three modules at the same time.

Solar module tester is designed for testing solar module,including a lower cost system: Long Pulse Longevity Xenon Lamp - High Power Electronic Load - High-Speed A/D Card - Computer & Printer - Data acquisition & Processing Software

Solar panels from 5watt to 180wattDifferent specifications available

BSL2.2-3.6OA 1?Module: 160W-200W Solar Module, laminating and curing four modules at the same time. 2?Module:240W-280W Solar Module, laminating and curing three modules at the same time.

solar street lgihts JYSTR007 Solar Panel: 10W, Vop= 1 7V, lop= 0.6A Rech. Batt.: Maintenance-free lead-acid rech. baH., 12V, 17Ah Lamp: Super bright LED,white/ blue/amber, 24PCS, Lighting Time: 5 nights,9 hrs per night bycharged for full shiny day Controller: Operates automatically, overcharge and over discharge protection Pole and Stand: Plastic-coated Operating ambient temperature: -40°C-50°C Wind-resistance: =150km/h  

2.1W monocrystallie silicon solar panel Standard charge current value:240mA, Rechargeable battery:6V/1200mAh LED Bulb/Charge time:5Hours Lasting time:36Hours/Life time:2-3years,H74cm,W26cm,L31cm,N.W.:5kg

Solar Panel: 0.3-0.4 W polysilicon by dip-glue Life time: 2years Battery: 1 or 2 x AAA size 600mAh rechargeable Ni-Cd batteries Life time: 2years Light Source: Super bright LED Up to 8 hours lighting at night Pole Material: ABS Controller: Switch on/off automatically by light control

By mature production technology of America PPG,Jinjing group co.,ltd has constructed an ultra-clear glass line that has 600T/D melting capacity.The thickness from 3MM 3.2MM 4MM with higher light transmission.4MM can reach 91.60-95% After its surface is tempered,low iron glass will even higher light transmittance ratio, and lower light reflection ratio,so it can be used as solar module ,solar panel to transform light into electricity or heat,e.g.,Flat plate solar energy heater.Solar energy PE module made from low iron glass has very high PE transforming ratio,and low cost. My name is Andrew Guo,contact information is sggguokui#yahoo.com.cn

The equipment installs conveniently, and service life is about 20 years. The reflector is fixed on the ground,so it not only resists the wind and rain ,but also greatly reduced the cost of support construction of the reflector. The most importance is the technology has breakthrough the traditional restriction that one system could only control one reflector equipment. the Fresnel line focusing system technology which we use is able to track several hundred reflectors at the same time, focuses several hundred and thousand square meters sunlight to the light so that energy transformation part could gather luminosity about 50 times than before. The solar mid-high temperature system widely apply to the daily drinking water, the steam, the heating, the air condition, the electricity generation, the spinning and weaving, the printing, the papermaking, the rubber, the seawater desalination, the livestock cultivation, and the food processing, ect.,

The parabolic mirrors can concentrate sunlight on a line of focus on the High temperature vacuum tube collector The aluminiferous is 99.9, reflectivity more than 95, the size could made as the order It just work for solar thermal power plants, Parabolic trough system, solar air-condition.

(Direct Current Heat Pip tube) The tube has 1) vacuum and direct current, 2)selective coating 3)heat pipe in it, the tube’s working temperature 100-400 It just work for solar thermal power plants, Parabolic trough system, solar air-condition. The dia. Has 100mm,120mm, and the length has 1500mm,1800mm,200mm

Performance parameter Peak Power (Pm)

15W Working Voltage (Vop)

17V Working Current (Iop)

940mA Open Circuit Voltage (Voc)

27V Short Circuit Current (Isc)

1300mA Standard testing condition: AM 1.5,1000W/, 25
. Dimension: 385 ×1275 ×26 Width×Length×Thickness Encapsulation: EVA laminating, aluminum frame for seal edge, junction box Packing a. Each solar module packed in an inner carton, ten pieces per outer carton b. Dimension of outer-packing carton: 1290mm×360mm×410mmLength×Width×Height c. Gross weight of outer carton: 69kgs, Net weight: 59 kgs. Certificate: CE SGS testing report

The CRM series solar cell module which is laminated and pressurized with low-iron toughened glass,EVAand TPT,has the characteristics of high efficiency,long life,wind-resistance and hail-resistance etc. The CRMS155P series solar cell module which is encapsulated with the importedpolycrystalline silicon solar cell,has the excellence of high transition efficiency,stable operation quality and good feeble-light domino effect

Model:JT-G002 Parameter: Solar module: Polycrystalline silicon solar panel 36W Photo source: high efficience saving bulb 5WX2 Battery storage: 12V24AH High-efficient Non-maintaining sealed rechargeable battery controller: min computer control working time:9hours(with full charge) height: 2.7m Workable temperature: -20-70 Remarks: the height of the light body can make from 2.5M to 4.0M, Like must a brighter photo source or lengthens on the light time, may change the solar cell board and the battery storage, The lamp body may defer to the customer request making to order.

Topray Solar’s TPSM-160 160Watt Mono-crystalline solar module use the company’s own solar cell which is produced using the latest technology. The solar cell has a SIN surface anti-reflective coating, which provides a uniform blue color and helps to absorb more light in all weather condition. Together with BSF (Black Surface Field) structure, the solar cell shows satisfactory conversion efficiency. Usual applications of this 160Watt solar module include pumps, beacons, Stand-alone Solar Systems for homes or telecommunication sector etc, and grid connected solar power station. Feature l Using 125X125mm persudo square monocrystalline solar cell in 12 X 6 array l TUV certified and IP65 rated junction box with cable with MC connector l By-passed diode to minimized power drop caused by shade l Anodized aluminum alloy frame l Anti-reflective high transparency tempered glass l Solar cell embedded in EVA (ethylene vinyl acetate) l Tedlar foil backing l 20 years limited warranty

Model: WM20000 Rated power(W): WM20000 Rotor Diameter (M): 20000 Rated wind speed (M/S): 10 Startup wind speed (M/S): 11 Working wind speed (M/S): 3 Working voltage: 3-25 Material and number of the blades: Reinforced fibber glass*3 Generator style: Three phase, permanent magnet Speed regulation method: Tail furl / Electronic controller Stop method: Manual electronic brake / Manual mechanical Brake / Automatic electric brake Tower height (M): 18

garden yard lamp, lawn lamp, flashlight, street lamp, resin lamp, water floating lamp, reading lamp and varied solar panels and so on.

Specifications: 1) Outer Tank Material: Sus 304 Stainless Steel 2) Inner Tank Material: Stainless Steel 3) Insulation: Foam 4) Support Frame: Stainless Steel 5) Reflector Board: Stainless Steel 6) Vacuum Tube 7) Super Conducting Tube

We mainly produce save energy products ,EAS system,hard tags for supermarketand the promotion gifts. such as solar flashlight, solar/crank hand radio,solar mobile charger, solar cooling cap, emergency mobile charger, radio hat, pedometer, telescope with radio, Led flashight with radio, digital camera,etc. the detail of ours, please visit our website www.crtop100.com or www.9866.com/com/top100.com , if you have any interest, please donot hesitate to contact us at your convenience.

We are Sunrain Solar Water Heater Manufacture Co., Ltd, one of the biggest manufacturers of solar water heater with vacuum tubes in China. By now, our products have entered many countries, such as UK, Turkey, India, South Korea, Indonesia, Poland, Spain, Kenya, New Zealand, and so on. We are looking a good contact in your area, if you are interested in our products, please contact me for details. Please find our products pictures in the attachment. Three models: First, for the normal model, there is water circulating in the vacuum tubes, the water in water tank will be heated by temperature difference between collector and the tank. Its advantage is that the cold water could not mix with the hot water. Cold water could be input when the hot water is used up. Also the normal model is the cheapest one of our products. It has the high efficiencies of collecting heat. Second, for the high-pressure solar water heater, the heat tubes in vacuum tubes, the water in tank is heated