Welding and Solders

Features: 1) It uses the straight line slideway to cooperate with the guide screw transmission, and welds horizontally to satisfies the accurate, smooth and steady requirement of action 2) Using stepper motor drive, it has interval between the accurate control welding seam. Quick high efficiency is responded in the action 3) The material physical design is completely square 4) It is assisted with the pressure platform board, making it quick and right in fixing a position

It is suitable for various industries such as toys, electric appliances, electronics, stationery, packing, vehicle and daily using.

Features: 1) Suit for welding thick plate which thickness is above 0.8mm 2) Low-cost, high efficiency and welding quality 3) Simply operation, economic and practical 4) Stable current; be able to balance voltage when voltage of power supply is waving 5) Input power voltage frequency: AC380 (three phase) ±15% 6) Frequency: 50/60Hz 7) Rate input power capacity (KVA):8.3 8) Input current: 12.6A 9) Rated output current: 250A 10) Rated output voltage: 26.5V 11) Duty cycle: 60% 12) Type of wire reeder: inside

Specifications: 1) Input frequency: 50 - 60Hz 2) Single phase input voltage: 230V 3) Max. power consumption: TIG/2.4KW, MMA/3.5KW 4) Max. non-load voltage: DC 65V 5) Dc Current range for TIG: 5 - 160A 6) Dc Current range for MMA: 5 - 130A 7) Duty cycle current at 60%: TIG/100A, MMA/75A 8) Insulation: class H 9) Protection degree: IP21 10) Dimensions (L x W x H): 380 x 180 x 300mm 11) Weight: 9.5kg Outer packing: 1 set/carton Carton dimensions: 48 x 22 x 39cm N.W.: 12kg G.W.: 14kg

Features: 1) Pure tungsten electrode suitable for welding under alternating current 2) Yttrium tungsten electrode mainly applied in military and aviation industry with narrow arc beam, high compressing strength, highest welding penetration at medium and high current 3) Composite tungsten electrode: their performances can be much improved by adding two or more rare earth oxides which are mutually complementary. The composite electrodes have thus become out of the ordinary in the electrode family

Cerium-tungsten electrodes have good starting arc performance under the condition of low current. The arc current is low, therefore the electrodes can be used for welding of pipe, stainless and fine parts. Cerium-tungsten is the first choice for replacing thoriated tungsten under the condition of low DC.

Molybdenum electrodes bars: Code: Mo-4.2 Density (g/cm³): 9.3 Size of finished products (mm): 14 x 20 x (400-520) 17 x 17 x (400-520) 20 x 20 x (530-540) Molybdenum electrodes plated: Code: BMo-4.2 Density (g/cm³): 9.9 Size of finished products (mm): (60-160) x (160-500) x (3-7)

Features: 1) Fan-cooled 2) High performance 3) Wide range of working piece (material) 4) Complete with CO2 kit 5) Suitable for professional working Specifications: 1) Main voltage: 1PH-230V 2) Frequency: 50/60Hz 3) Input capacity (60%): 6.4kVA 4) No-load voltage: 21 - 39V 5) Welding current (±10%): 40 - 200A 6) Duty cycle: 60% 7) Wire spool weight: 150kg 8) Wire spool diameter: 300mm 9) Power setting: 6 10) Flux cored wire: 0.8 - 1.0 11) Wire for steel: 0.8 - 1.0 12) Wire for stainless steel: 0.8 13) Wire for aluminum: 0.8 14) Insulation class: H 15) Protection degree: IP21S 16) Dimensions: 900 x 440 x 700cm 17) Weight: 90kg

Specifications: 1) Power supply: AC 220V±10%, 50/60Hz 2) Rated input current: 22A 3) Power capacity: 4.8kVA 4) Rated output current: 160A 5) Range of output current: 20 - 160A (15 - 40A) 6) Working voltage: 28V (100V) 7) Pre-flow: 0 - 2s 8) AC output frequency: 60Hz 9) Clean width: 20 - 60% 10) Tail-gas time: 2 - 10s 11) Remote control: yes 12) Arc-leading: HF vibration 13) Efficiency: 85% 14) Rated duty cycle: 60% 15) Power factor: 0.93 16) Insulation class: B 17) Protection class: IP21 18) Weight: 20kg 19) Overall dimensions: 493 x 330 x 320mm 20) Max. welding thickness: 10mm

Features: 1) New type and efficiency 2) One machine has three purposes: TIG, MMA and cutting 3) Operation is more convenient 4) High performance-price ratio Specifications: 1) Power supply: single-phase 220 - 240V, 50/60Hz 2) Power factor: 0.93 3) Rated input current: 19A (cutting) 4) No-load loss: 40W 5) Output current: 20 - 30A (cutting) 6) Housing protection grade: IP21 7) Rated output voltage: 110V (cutting) 8) Rated output current: 30A (cutting) 9) Insulation grade: B 10) Max. thickness: 12mm (cutting) 11) Duty cycle: 60% 12) Efficiency: 85% 13) Weight: 12.5kg 14) Dimensions: 350 x 150 x 225mm

Features: 1) No need to connect any power supply and it is connected easily to the machine 2) Smart and durable, easily HF started 3) Suitable for the TIG welding machine with longer welding cable and would change the DC MMA welder into TIG welder Packing: Standard export packing

Specifications: 1) Input power voltage: single-phase AC 220V±15% 2) Rated input power capacity: 3.9kVA 3) Input voltage frequency: 50/60Hz 4) No-load voltage: 54V 5) Output current range: 10 - 180A 6) Rated output voltage: 17.2V 7) Duty cycle: 60% 8) No-load power: 40W 9) Efficiency: 85% 10) Power factor: 0.93 11) Insulation class: B 12) Weight: 8kg 13) Overall dimensions: 3,710 x 155 x 295mm 14) Protection class: IP21 15) Welding thickness: 0.3 - 6mm 16) Post gas: 2 - 4s 17) Pulse frequency: a) MH50: 200Hz b) LH0.5: 2Hz 18) Down-slope time: 0 - 5s 19) Basic current: 10 - 90%

Features: 1) Input power voltage frequency: single-phase AC 220V±15%, 50/60Hz 2) Rated input power capacity: 3.2kVA 3) Output current range: 16.4V 4) No-load voltage: 43V 5) Duty cycle: 60% 6) No-load power: 40W 7) Weight: 8kg 8) Overall dimensions: 371 x 155 x 295mm 9) Post gas: 2.5s 10) Current of MMA: 10 - 150A 11) Welding thickness: 0.3 - 5mm 12) Insulation class: B 13) Efficiency: 85% 14) Power factor: 0.93 15) Protection: IP21

Features: 1) Advanced inverter technology 2) High working frequency 3) Reduced size and weight, easy to carry 4) MMA function optional Specifications: 1) Power supply: single-phase 220 - 240V, 50Hz/60Hz 2) Power factor: 0.93 3) Rated input current: 15A 4) No-load loss: 40W 5) Output current: 10 - 160A 6) Housing protection grade: IP21 7) Rated output voltage: 16.4V 8) Rated output current: 160A 9) Insulation grade: F 10) Welding thickness: 2 - 4mm 11) Duty cycle: 60% 12) Efficiency: 85% 13) Dimensions: 371 x 153 x 232mm Packing: N.W.: 9kg G.W.: 12.5kg

Features: 1) Inverter full function pulsing AC/DC TIG (MMA) welding machine 2) Suitable for the welding of all the metals 3) With foot pedal control Specifications: 1) Input voltage: 220 - 240V, 50Hz/60Hz 2) MMA: a) No-load voltage: 60 - 80V b) Base current range: 5 - 160A c) Rated output current: 160A d) Duty cycle: 35% 3) AC TIG pulsing: a) No-load voltage: 60 - 80V b) Base current range: 10 - 200A c) SP%: 0.1 - 0.9 d) AC square wave frequency: 20 - 100Hz e) Duty cycle: 60% 4) DC TIG and pulsing TIG a) Pulse current range: 5 - 200A b) Duty cycle: 60% at 200A c) Current up-slope time: 0 - 10s d) Current down-slope time: 0 - 10s e) Base current range: 5 - 200A f) Pulse width ratio: 0.1 - 0.9 g) Pulse frequency: 0.5 - 25Hz h) After flow time: 1 - 25s i) ARC striking mode: contacting and high frequency as striking 5) Efficiency: ≥80% 6) Protection class of insulation: IP21 7) Ex

Features: 1) Stable arc, easy to fill in the wire 2) Pedal current controlling 3) Compact, low noise 4) DC welding for stainless steel, alloy steel, carbon steel, copper and other color metal welding 5) AC welding for aluminum welding 6) With MMA (stick) function Specifications: 1) Power supply: single-phase 220 - 240V, 50/60Hz 2) Power factor: 0.93 3) No-load voltage: 56V 4) Preceding puff time: 0 - 2s 5) Space rate: 20 - 80% 6) Wane time: 0 - 5s 7) Caudal gas time: 2 - 10s 8) Arcing way: FH 9) Rated input current: 21A 10) Output current: 10 - 200A 11) Housing protection grade: IP21 12) Rated output voltage: 18V 13) Rated output current: 200A 14) Insulation grade: B 15) Max. welding thickness: 10mm 16) Duty cycle: 60% 17) Efficiency: 85% 18) Weight: 22kg 19) Dimensions: 498 x 328 x 302mm

SHB series lifting type positioner can not only accomplish all functions of ZHB series positioners, but also be utilized combined with welding fixture to satisfy the special requirements of various products with variable large sizes, which is its main advantage. Weldment with small overall dimensions can be welded in the low position, while the ones with large overall dimensions can be welded after raising the position of working bench.

Adjustable turning roller can be divided into classifications of movement adjusting type and thread road continuous adjusting type. Classification movement adjusting type turning rolls, according to the size of pipe diameter and distance between both of the wheels, can be adjusted to adapt rotation of different working pieces. The form is stable and reliable, rotating stably, specially adapts to the big components. Thread road continuous adjusting type turning rolls can realize stepless adjustment of the space of rolls with feed screw manually, of which the advantage is making two rollers stop on the position required to weld the tapered cylindrical weldment through adjusting the space of master and slave turning rolls.

The horizontal arm has security facilities that prevent the chain from cracking or sliding. As a kind of auxiliary machinery for welding, welding manipulator is applied widely in the industries of boiler, pressure-vessel, pipe and metal structure. Matching with turning rolls, positioner or tilter, it can be used for welding internal and external longitudinal welding and circumferential welding of large-diameter pipe. Welding system, as well as welding tracer, monitoring system, welding flux automatic transmission and recovering system or weaving machine can be selected according to the technological requirement of users.

This machine uses 6 axles moving in steps, and has coherent cutting function. It is widely applicable for net shelves, and can automatically cut off the connection between a big pipe and a narrow one. This machine is easy to operate, and its high precision and high efficiency make it possible to meet the demand of medium or large-scale production.