Driver for 1 up to 4 synchronous motors (BLDC)
The driver can be connected to pc via usb and be controlled from there.
The motors will act synchronously. They will produce the same speed (rpm) even if they have different load (nm).
Every motor has its own processor and can be programmed individually (c-compiler) so they act in accordance with there own schema.
The motors are of the type brush less and slot less, so they produce a minimum of acoustic noise.
The motors on the picture have a hollow shaft for a spindle and our standard spindle has a pitch of 2 (2 mm per revolution) and a diameter of 10 mm. Spindles with different pitch are available.
The motors on the picture deliver 34 w on the shaft each continuously.
Motors without spindle and a traditional shaft are available.
The driver has entries for 2 limit switches.
Standard input is 230 VAC
Denmark