Product List

A heat exchanger is a device built for efficient heat transfer from one medium to another, whether the media are separated by a solid wall so that they never mix, or the media are in direct contact.[1] They are widely used in space heating, refrigeration, air conditioning, power plants, chemical plants, petrochemical plants, petroleum refineries, and natural gas processing. One common example of a heat exchanger is the radiator in a car, in which a hot engine-cooling fluid, like antifreeze, transfers heat to air flowing through the ***** heat exchanger is accoding to your requiremnts that is why we are the pioneer in the field.

2BVC Series Water Ring Vacuum Pump and compressor is mainly used for sucking gases and water vapour. The ultimate suction pressure can reach 33mbar (97% vacuum). When working under suction pressure below 80mbar long time, it should be connected with cavitation resistant pipe. The suction pressure can reach 10mbar if assembling with an air ejector. As a compressor, the ultimate pressure can reach 0.26MPa. Characteristics: 1. Motor:Inline,direct connection with the pump, saving space and easy to install. 2. Mechanical seal: No leakage and easy to maintain. 3. Firm performance and low noise (can be as low as 62 db(A)) 4. Bronze impeller improves the corrosion resistance; Stainless steel vacuum pump can meet higher requirements for corrosion resistance. 5. Special flexible outlet design ensures no over-compressing and firm performance under design conditions.

glass-lined and stainless steel reactor with the capacity 50-30000L. Corrosion Resistance Stability: Very high corrosion resistance against inorganic acid, organic acid, organic solvent with different concentration and weak base, but not applicable to alkali, hydrofluoric acid, fluoride-bearing medium and phosphoric acid with concentration above 30% at temperature over 180. Resistance to Impact: 220-10-3J. Thermal Shock Resistance: Resistance to sudden cooling 110, Resistance to sudden heating 120. Insulation Performance: The enamel surface should be strictly tested at 20KV. If you want to know more, please click our website.

we can provide both vertical and horizonal storage tanks made of stainless steel or glass-lined, rubber-lined or PE-lined steel. we can supply 100-50000L storage tanks, stainless steel, glass-lined, rubber-lined, PE-lined etc. Performance of Glass-lined equipment: Corrosion Resistance Stability: Very high corrosion resistance against inorganic acid, organic acid, organic solvent with different concentration and weak base, but not applicable to alkali, hydrofluoric acid, fluoride-bearing medium and phosphoric acid with concentration above 30% at temperature over 180. Resistance to Impact: 220-10-3J. Thermal Shock Resistance: Resistance to sudden cooling 110, Resistance to sudden heating 120. Insulation Performance: The enamel surface should be strictly tested at 20KV.