Measurement and Meter

Trasit-time (time of travel) ultrasonic flow meter with clamp-on and insertion type sensors (transducers) at the most affordable prices in the world. It comes in various configurations such as hand held, portable, wall mount and panel mount and explosion-proof enclosure. Its proven accuracy and reliability makes it our flagship flow meter amoung other meters we are supplying to our customers from all over the world. The technical specifications are as follows. The media that can be measured are water, brine and other clean liquids with suspended solids below 10,000 ppm(mg/l) and low content of entrained air bubbles with temperature between -20~100 deg c(the medium should be free from ice in low temperature). The pipe materials that can be measured are steel, stainless steel, cast iron, plastics, concrete, etc. With the inside diameter between 15 and 6,000mm. The velocity range of the fluid is between 0 and 16 M/S. The flow computer can operate at the environment of temperature be

Trasit-time (time of travel) ultrasonic flow meter with clamp-on and insertion type sensors (transducers) at the most affordable prices in the world. It comes in various configurations such as hand held, portable, wall mount and panel mount and explosion-proof enclosure. Its proven accuracy and reliability makes it our flagship flow meter amoung other meters we are supplying to our customers from all over the world.

Owing to their simplicity, low-cost but high-reliability nature, these meters have found applications in a wide variety of industries including but not limited to paper/fiber, steel, petrochemical, food/beverage, air-conditioning, water treatment, chemical, etc. industries. Even with the rapid growth of new technology meters such as ultrasonic, electromagnetic and Coriolis meters, this type is still one of our steady sellers.

- Fully digital wet gas meter - Drum Type, Volumetric- High-precision measuring and calibration - Rugged design - Easy to use and maintain Specifications:Type : Digital/Cubic Content Application: Gas flow Measurement and calibration Accuracy: Within +/- 1% Repeatability and Linearity: Within +/- 0.2% Accumlated Flow Display: 6 digits LED Temperature Display: 4 digits LED Operating Temperature: -10 ~ 60 degree celcius Maximum Operating Pressure: 3000 mmH2O Material of Housing: Stainless Steel Output: Accumulated Pulse Power: 100/220 VAC

A wide range of digital panel meters designed to be installed in monitoring and control panels in industrial field. Made with Microprocessor technology, this Digital Panel Meter allows the operator to monitor and to do the programming of range and decimal point via the four buttons on front panel. Various inputs and optional outputs of 4_20mA, Relay 2P, RS232/485 Communications are available. Auto calibration are also available via communication or via front buttons. With modular design in 96mm x 48mm / 96mm x 96mm DIN case, his unit is housed in a fire-protection molded ABS case with a high-luminosity, 7segment LED display. Unified appearance and ease of use. Worldwide distribution and fast delivery. OEM/ODM distribution is also available. Available Item: * AC/DC Ampere meter * AC/DC Volt meter * Frequency meter * Power Factor meter * Watt meter, Var meter * Watt-hour, Var-hour meter * Temperature * Large Indicator * Others

Triple Output * DUAL Voltage, Ampere: DC+30V/3A, DC-30V/3A. * Fixed Voltage, Ampere: DC 5V/2A. Output: ON / OFF Control Key Lock: Key Lock to Avoid Error Operation Protection: Overload Voltage, Ampere Protection: (SMPS) Protect over heat and Overload CC, CV Set: AUTO Set Tracking: AUTO Tracking 14bit Programming and the voltage, the read back of the current. Programming that can do up and down fast. High Efficiency and High Power Density Standard Commands for Programmable Instruments (SCPI). Setup: Setting and functions may be selected and stored in memory from the front panel. Eight setups may be stored in memory. Equipment: Displays information about your instrument including the Model number, serial number, Calibration date, GP-IB address and Firmware revision. Remote Control: Function and ranges may be controlled from a PC via the RS232 or the optional GP-IB interface. Display: 128 by 64 pixel Super Twisted LCD display Power Source: May be used with any line vo

Programmable Record (MAX / MIN): Records and displays the MAX and MIN values of the input freq. Programmable Relative (REF / ERR): Displays Reference frequency and the deviation of the measured frequency from the reference frequency as a % error. Programmable Compare (GO-NOGO): The LCD will display PASS if the input frequency is with in the HI/LO limits, LO if the frequency is lower than the LO limit and HI if the frequency is higher than the HI limit. Frequency range: CHA, B: 120MHz Measurement: FRQ. A, FRQ. B, Time interval, Totalize, Ratio A/B, Difference Freq. (A-B), Duty cycle and RPM Resolution: 7 Digits Range: Full Auto Range Trend Plot: The REF is the centerline value on the trend graph, H/Div is the X axis (time) and V/DIV is the Y axis (amplitude). Setup: Setting and functions may be selected and stored in memory from the front panel. Eight setups may be stored in memory. Equipment: Displays information about your instrument including the Model number, serial number,

Programmable Record (MAX / MIN): Records and displays the MAX and MIN values of the input freq. Programmable Relative (REF / ERR): Displays Reference frequency and the deviation of the measured frequency from the reference frequency as a % error. Programmable Compare (GO-NOGO): The LCD will display PASS if the input frequency is with in the HI/LO limits, LO if the frequency is lower than the LO limit and HI if the frequency is higher than the HI limit. Frequency range: CHC: 2.4GHz (CHA: 120MHz) Measurement: FRQ. A, FRQ. C, Time interval, Totalize, Duty cycle and RPM Resolution: 7 Digits Range: Full Auto Range Trend Plot: The REF is the centerline value on the trend graph, H/Div is the X axis (time) and V/DIV is the Y axis (amplitude). Setup: Setting and functions may be selected and stored in memory from the front panel. Eight setups may be stored in memory. Equipment: Displays information about your instrument including the Model number, serial number, Calibration date, GP-IB

Triple Output * DUAL Voltage, Ampere: DC+30V/3A, DC-30V/3A. * Fixed Voltage, Ampere: DC 5V/2A. Output: ON / OFF Control Key Lock: Key Lock to Avoid Error Operation Protection: Overload Voltage, Ampere Protection: (SMPS) Protect over heat and Overload CC, CV Set: AUTO Set Tracking: AUTO Tracking 14bit Programming and the voltage, the read back of the current. Programming that can do up and down fast. High Efficiency and High Power Density Standard Commands for Programmable Instruments (SCPI). Setup: Setting and functions may be selected and stored in memory from the front panel. Eight setups may be stored in memory. Equipment: Displays information about your instrument including the Model number, serial number, Calibration date, GP-IB address and Firmware revision. Remote Control: Function and ranges may be controlled from a PC via the RS232 or the optional GP-IB interface. Display: 128 by 64 pixel Super Twisted LCD display Power Source: May be used with any line vo

Dual Channel and Auto Calibration. DC to 1MHz Oscilloscope band width Sampling Time * Dual CH mode: 25 Ms/S * Single CH mode: 50 Ms/S Automatic Triggering. Automatic setting for horizontal and vertical division Roll and Single shot mode Excellent internal noise reduction Real time Update and Auto ranging. 45 shot reference waveform and setup memories (45 shot wave form) Built-in auto ranging True-RMS digital multi-meter Data hold and run mode. Extra Bright Back light display Low battery indication. Max. Voltage between any Input and Ground: DC or AC 600Vpeak RS-232 interfaces for transferring measurement data and waveform. Display Type: Super-Twist 132 x 128 pixels Designed to comply with safety standard for UL3111, CSA C22.2 No.1010-1 Technical Specification Oscilloscope Function Horizontal Sample Rate 25 Meg-samples per second (Dual CH mode) 50 Meg-samples per second (Single CH mode) Record Length 512 in single shot and glitch capture mode 256 in all other

Programmable Record (MAX / MIN) : Records and displays the MAX and MIN values of the input freq. Programmable Relative (REF / ERR) : Displays Reference frequency and the deviation of the measured frequency from the reference frequency as a% error. Programmable Compare (GO-NOGO) : The LCD will display PASS if the input frequency is with in the HI / LO limits, LO if the frequency is lower than the LO limit and HI if the frequency is higher than the HI limit. Measurement: DCV, ACV, OHM, BEEP, DIODE, FREQ, DC uA / mA, DCA, AC uA / mA and ACA Resolution: 5 1 / 2 Digits (200, 000 Count) Accuracy: 0. 001ohm, Error: 0. 05% True RMS, AC Range: Full Auto Range Trend Plot: The REF is the centerline value on the trend graph, H / Div is the X axis (time) and V / DIV is the Y axis (amplitude) . Setup: Setting and functions may be selected and stored in memory from the front panel. Eight setups may be stored in memory. Equipment: Displays information about your instrument including the Model n

Now you can measure the acidity of various fruits precisely with just one measurement. That is GMK-708. Product Features 1.By Using Electric Conductivity Method 2.Automatic Temp. Compensation 3.Average Data is available. 4.Measurement results can be printed. 5.Low Battery sign appears. Product Specifications 1.Measuring Ranges: Citrus- 0.0~3.50%, Orange- 0.0~3.50%, Pineapple- 0.0~3.30%, Kiwi- 0.0~2.00%, Apple- 0.0~3.50%, Grape- 0.0~2.00% 2.Accuracy: +-0.05% 3.Resolution: +-0.01% 4.Power Source: Battery 1.5V x 4EA, AC 100~240V/60Hz 5.Dimensions: 250(W) x 175(L) x 65(H)mm 6.Gross Weight: Approx. 3Kg

The tastiest and healtiest food comes from the best quality grains. And then how could we pick out the best quality grains? Here is an answer, GMK-303RS. The quality of grains is very much influenced by the moisture content of grains. Why don't you pick out the best quality of grains with GMK-303RS and go to business success? Product Feature 1.Moisture Content measurement for Grains. 2.Easy to use, compact and quick reading. 3.Microprocessor control. 4.Automatic temperature compensation. 5.Battery replacement sign appears. 6.'CE' mark obtained. Product Specification/Models Applications: Grains Display: Digital L.C.D Temp. Compensation: Automatic Power Source: Battery 1.5V X 4EA Accuracy: ±0.5% Dimensions: 164(L)X94(W)X40(H)mm Weight: Approx. 1.5Kg Application Rice: 9.8%~26.0% Paddy: 8.5%~30.0% Soybean: 8.5%~21.5% Red Bean: 12.5%~19.7% Barley: 8.3%~30.0% Wheat: 9.0%~30.0% Corn/Maize: 8.7%~22.8%

The tastiest and healtiest food comes from the best quality grains. And then how could we pick out the best quality grains? Here is an answer, GMK-303. The quality of grains is very much influenced by the moisture content of grains. Why don't you pick out the best quality of grains with GMK-303 and go to business success? Product Feature 1.Moisture Content measurement for Grains. 2.Easy to use, compact and quick reading. 3.Microprocessor control. 4.Automatic temperature compensation. 5.Battery replacement sign appears. 6.'CE' mark obtained. Product Specification 1.Display: Digital L.C.D 2.Temp. Compensation: Automatic 3.Power Source: Battery 1.5V X 4EA 4.Accuracy: ±0.5% 5.Dimensions: 164(L)X94(W)X40(H)mm 6.Weight: GMK-303 Approx. 1.3Kg, Application(GMK-303) Rice: 9.8%~26.0% Brown Rice: 9.8%~26.0% Paddy: 8.5%~30.0% Barley: 8.3%~30.0% Naked Barley: 8.5%~25.0% Wheat: 9.0%~30.0%