Paint

SEL ENAMEL is a high quality paint used indoors and outdoors on all kind of surfaces (wooden,metal.plaster etc.)The layer is shiny,durable and shelf guarented.One liter of Sel Enamel can cover of about 10m² .

The surfaces which emulsionpaint is to be applied on should be sound, smooth, dry, clean and suitable to painting. Otherwise, surface should be cleaned from old and loose paint residues. Cracks and roughness on the surface should be smoothed with satin gypsum or interior and exterior surface putty. After this pretreatment, the surface should be sanded and sand dusts should be removed from the surface. In order to decrease the paint consumption, surface should be primed with izolan or for very loose surfaces.

Definition : High performance, 2-component road marking paint. Application Field: For marking of pedestrian crossings, stop lines, direction arrows and safety markings with increased night visibility. Colour: White, yellow (it is possible to produce the other colors from RAL catalogue) Advantages: - doesn't contain any solvent, - harmless for nature, - it is very easy marking direction arrows, - they are resistant to abrasion, aging, road salts and fuels, - all the colours are avaliable

Definition: High performance road marking paint. Application Field: Road Marking paintColour: White, yellowAdvantages: - high quality for sticking on road, - harmless for nature and surroundings, - short drying time, - low price

Description: Urethane-based,high brightness. It is an extremely resistant synthetic varnish especially forwooden parts of sea vessels. Features: Bright, fast drying,hardness quickly, resistant to rain, sun and hitting. It has resistant to seawater.Application area: It can be appliedon wooden parts of sea vessels. It is applied on wooden parts of buildingseither alone or with Cabel Wood Protector. It gives brightness.Application: It is applied with abrush or a spray gun. Places on which it is applied must be cleaned from dirt,dust and grease. Painted and varnished surfaces must be sanded with emery.Surfaces which were colored by Cabel Wood Protector must be sanded with emeryto make it ready for varnishing. First coat of primer must be thinned with %10Cabel Synthetic to be absorbed well. 2 and 3 coats must be applied withoutthinning 3-6 hours later. Before each coat the surface must be sanded in orderto get good adhesion. Dry time: (25°C) against dust 2-3hours, Complete drying 24 hou

Description: It is an insideand outside last coat paint which is alkyd resin based. It has superiorcovering features and brightness.Features: It has a high coverage,dries quickly, does not pale, and stays bright. It is also resistant tophysical and chemical effects.Applying Area: Inside and outside ofthe building, on bricks, wood and metal surfaces, on vehicles of land and sea,on agricultural machines.Application: Cabel Lux Syntheticpaint can be applied with brush, roller and spray gun. It can be thinned. Twocoats can be applied one day and the day after. The surface on which it will beapplied must be cleaned. After cleaning grease, dirt and rust, Cabel antirustmust be applied on rusty surfaces. On wooden, surfaces splinters must be burnt.First Cabel wood protector and then Cabel Synthetic Primer is applied. It mustbe applied over +5 °C.Touch free time: 2-3 hoursDry against dust: 5-6 hoursDry hard: 12-14 hoursDilution: It is thinned with %10-15Cabel Synthetic Thinner.Consumption: A

DESCRIPTION: CABEL-ART siliconeemulsion based water proof weather resistant, mat exterior paint.PROPERTIES: Excellent adhesivepowers on all surfaces. It has high vapor permeability. Surface stays dry. Doesnot crack or blister. APPLICATION AREAS: Can be applied toevery type of concrete, plaster and mineral substrate surfaces. It can also beapplied to painted surfaces for decorative purposes.APPLICATION: Before applying, sandthe surfaces if required. Any rough, peeling or flaking sections should clean. Anycracked or detective areas should be repaired and primed with CABEL-ART ASTARprimer at a minimum temperature of + 5°C. Wait 24 hours before applyingCABEL-ART over the primed surface with brush or roller. DILUTION: Dilute with 20% cleanwater.CONSUMPTION: Depending on conditionof surface, 160-180 ml/m2STORAGE: It has shelf life of 2years when stored unopened at room temperature.PACKAGING: It has available in 15lt. 2.5 lt. and 0.75 lt. P.E. containers.

We can sell a new product of foam soap with dispenser with very competitive price to all over the world. Best RegardsYavuz Selim Aykac (Mr. ) Dragoman Under Oath & Foreing Trade SpecialistEBRAR DANISMANLIK" Global Consultancy & Agency Office "Address: Bagdat PASAJI, 77. S. Urfa / TURKIYETel & Fax: + 90 414 215 60 96Mobile: + 90 506 535 24 63

Techno-Paint is a poweful paint remover. There is no need to rinse the surface after the application. It also does not cause any scratches or harm on surface made of steel, metal, aluminium or concrete. It does not contain acid or alkali. Packaging: 45 KG metal (steel) barrels. Usage: It is directly used through dipping or rinsing without being diluted with water

In a single application, Techno-Met clears rust, oil and grease from metal surfaces prior to painting. Techno-Met imparts a micron phosphate finish to cleaned metal surfaces enabling any subsequent paint or plating systems to adhere efficiently to the treated substrate. Packaging: 30 lt or 60 lt. Plastic barrels. Usage: Diluted with water up to 1 / 5 (20% ) .

Base Resin : SiliconeColours : Aluminium, BlackTouch drying : 20-30 minutesPackage : 18 Kg metal pail

Base Resin : PolyurethaneDensity : 1,22 gr/cm3Gloss : High GlossComponents Mix Ratio : Component A :3, Component B : 1Pot Life of Component Mixture : 6 HoursDrying Time : First Dry :20 Minutes Recoating :6-8 Hours Total Curing : 7 Days

Base Resin : Solvent Free Epoxy ResinColours : RAL ColoursPackages : 2 Component, Comp A =16 Kg. Comp B =4 KgVOC Content : 7 g/ltThinner : No Thinner

Base Resin : Silicone modified acrylicColour : WhitePackages : 7,5 Lt, 15 LtGloss : MatteDrying Time : 6-8 Hours

Base Resin : PolyurethaneDensity : 1,22 gr/cm3Gloss : Any Gloss depending on customer requestComponents Mix Ratio : Component A :3, Component B : 1Pot Life of Component Mixture : 6 HoursDrying Time : First Dry :20 Minutes Recoating :6-8 Hours Total Curing : 7 Days

Base Resin : EpoxyDensity : 1,30 gr/cm3Gloss : High GlossComponents Mix Ratio : Component A :80, Component B : 20Pot Life of Component Mixture : 6-8 HoursDrying Time : First Dry : 45 Minutes Recoating : 12-14 Hours Total Curing : 7 Days

Type of Resin- AlkydSpecific Gravity (g/ml) (20°C) :1,20Glossy (60° - Gloss) : min 80Flash Point ( °C ):< 22 Recommended number of coats : OneDrying Time (20°C) : Touch Dry:10 minutes Dust Free : 20 minutesDry through : 1-2 hours

Physical & Chemical CharacteristicsColour : Any Colour request will be metVolume Solids Rate : -Brightness : MatteFlash Point : N/ADensity : 1,50 gr/cm3Viscosity : N/ATheoretical Spread : 1-1,5 m2/KgDrying Time : 45 minutesThinner : No Thinning requiredStorage Life : 1 year if kept in cool and dry storage areas

It is a double component paint modified with vinyl phenolic resin. Dries very quickly, has utmost chemical and physical resistance. Does not burn under welding. Accepts any paint on it. Specially produced for metal constructions, preproduced primer paint. Colour: All Colours available; Any Colour Request can be metBrightness: MattThinner : KBK Epoxy TinnerStorage life: Must be kept in cool dry places, covers must be closed tightly. Drying (At 20 C degrees and at 65 percent relative humidity) : Touch dry time 1-3 min. : Mounting dry time 5 min: Exact hardening 7 daysTheoretical Painting Surface: 12 m2 / KGApplication Fields: It is used as first coat on metal surfaces between production and mounting processes. It protects metal surfaces for 6 months without final coat application.

Acrylic copolymer emulsion based, silicon modified, matt decorative finalcoat paint. Specially developed for painting interior walls and gypsum plaster surfaces. Washable. Water and friction resistant. High coverage. ( kbk emulsion paint is also available) Colour : all colours available; any colour request can be metBrightness : mattThinner : waterThin down ratio : 15-20% waterStorage life : 12 months (under seal) Drying : touch dry time 1 hour: hard drying time 24 hoursApplication methods : brush, roller; 2 coats must be applied. Surface preparation : old painting, dirt, rust, oil, etc. should be cleaned, application surface must be dry and clean. Frictions must be filled with putty. Lime and gypsum plaster surfaces should be hardened with binder.