Paint

Prosep Plastic Paint is an interior last layer paint aplied to plastered surfaces, concrete and plastered ytong surfaces. It is a PVA based mat looking interior paint which is environment conscious, fast drying and has a semimat appearance. It can be thinned with water. It is without any bad odour and enables the moisture to go out. It keeps its color so long and has a high covering capacity. Ready fro sale in 15 lt , 7,5 lt ve 2,5 lt. buckets.

Used for painting flourescent ballast by dipping and drying in owen.

Acrylic-based, grained coating for exterior walls. Thixotropic and grained coating for exterior fronts. Allows moisture to go out of the wall due to its respiration capabilities. Resistant to extreme temperatures and UV radiation. Can be applied on all kinds of surfaces such as concrete, gas concrete, briquette, brick and similar surfaces with fine-plaster

ORION is a continuous coating for exterior and interior walls based on acryl binder and selected italian marble grains.

ISONEM ROOF is a waterproofing coating, polyurethane resin based, liquid applied, fully adhered, "rubber-like" protective membranes, forming very high coatings featuring very high chemical and physical resistance. The product has perfect UV resistance. It can be applied in thick layers to protect the metal and concrete surfaces against the chemical and physical outside impacts.

ISONEM BE 90 is a high-build acrylic roof coating. It forms a durable elastomeric membrane with excellent flexibility and water-proofing properties. The appearance is slightly textured.

ISONEM MD 28 is a two component acrylic modified cementitious coating that requires only on site mixing to form the ideal product to waterproof and resurface concrete, masonry, and most other construction materials. Fields of Application � To reface and even out variations in concrete surfaces. � As a waterproof lining for water retaining structures. � For coating seawater channels. � Sealing and coating tie bar holes to ensure watertightness. � For waterproofing & protection against brackish water. � To provide foundation protection. � As a waterproof coating for roofs. � As a backing to marble and granite to prevent water ingress and thus alleviate surface staining. � For fixing tiles in water retaining structures. � To provide protection to concrete surfaces fromcarbonation and chloride attack. � For use on pedestrian walkways in marine areas. Features and Benefits  � A 1mm coating provides anti carbonation coverequivalent to over 80 cm of concrete.

This product is a joint filler material based on cement, consisting of integration of hydraulic binding special filler and the inorganic pigments with the polymer support, featuring water repellent effect thus it is elastic and high performance. Therefore it is ideal to use in swimming pools, terraces, basement or interior & outer areas. It retains no dust and may be colored, it can be used in joint filler materials of any kind of tile, ceramic, btb, square cement floor tile and glass brick, it is available to use in the joint filler spaces of 0-8 mm. It is resistant against the water. It represents high adhesive resistance. No crack, no dirt or no stain is observed.

ISONEM FLOOR 2K is a floor coating with solvent-free, epoxy resin based, forming very high coatings featuring very high chemical and physical resistance, it can be applied in thick layers to protect the metal and concrete surfaces against the chemical and physical outside impacts. USING AREAS: A long lasting coat is available to use in industrial plants, factories, refinery plants and particularly drug and food production fields due to solvent-free characteristics, acid production sites, chemicals factories, laboratories, automotive industry fields, purification facilities, water tanks, metal and concrete floor and walls. APPLICATION THE MIXTURE: The mixture is applied onto the surface in single layer by using a brush and airless spraying equipment, if the thickness is required, the second layer should be applied immediately after the first layer got dried within 24 hours thus the best adhesion is ensured among the middle layers. The application should be done into the same direct

ISONEM M 35 - 2K is a blend of cements, aggregate and acrylic polymer modifying agents. When mixed to a slurry consistency with the emulsion ISONEM M 35 - 2KLiquid, it can be easily applied by brush or spray equipment. It cures to give an elastomeric flexible waterproofing membrane. UsesSuitable for internal and external use, against positive and negative water pressure.Water storages,Swimming pools,To protect concrete from water, carbonation and deicing salts.For waterproofing water-retaining structures which may be subject to movement.Basementwaterproofing system, in areas sensitive to movement, vibrations and slight settlement.Suitable for use in wet area waterproofing where tiles are to be installed using a proprietary tile adhesive.Properties-          High durability-          Resistant to positive and negative pressure-          Water vapour perm

ISONEM BE 99 is an exterior paint that forms an elastic and waterproof layer on the surfaces applied after drying up.

ISONEM BE 99 is an exterior paint that forms an elastic and waterproof layer on the surfaces applied after drying up. It offers a decorative coating, it is water based and polymer based. It does not contain solvents and has an elasticity of 300% it can be applied on dry or slightly humid surfaces. It is highly resistant against UV radiation and climatic conditions. Although it is waterproof, it allows the penetration of vapors This characteristic allows the building to breathe and prevents the formation of humid or moist inside the building. Its special formula keeps the surfaces free from pollution and stains and maintains its original appearance for many years, it prevents the generation of carbon dioxide inside the buildings and due to this characteristic, it reduces carbonization formation and protects the accessories inside the concrete. It also protects the building against external effects created by factors such as rain, air pollution, traffic, etc. Due to its high elasticity,

ISONEM MS 80 is a sloxan based transparent insulation material that protects that natural texture and the appearance of the structures without forming a film layer on the exterior surfaces where it has been applied. Since it does not form a film layer on the surface, it does not prevent or reduce the breathing capacity of the building or the stone, and does not distort its esthetic appearance. Its alkali resistance is very high; therefore, it can easily be applied on the new and old concrete surfaces. It prevents vomiting of salt and the formation of stains due to the mortar of the pressed bricks, natural and artificial stones or the plaster on which it has been applied. Since it prevents dampness, it also avoids the loss of the heat insulation value of the buildings Protects the building from the damages and corrosion caused by the rain. It increases the life of the buildings, and can be used as a coating underneath the painting of the exterior surfaces. Advantages: It is transparent

ISONEM MS 82 is a very strong insulation paint that is manufactured through modification with special chemicals and polymers for the purpose of the elimination of the problems caused by moisture and humidity on the interior and exterior walls of the buildings arising from the natural conditions. Using Areas: On wet and moist walls, On painted or non painted waIls affected by humidityOn the interior and exterior walls of the foundationOn the walls of the basement floorOn surfaces and floors coated with plaster, concrete, alum, etcIn tunnels, on the walls of buildings facing northOn the walls that are exposed to the formation of mould and fungi, in the elimination of problems arising from humidity and moist.

ISONEM BE 90 is a high-build acrylic roof coating. It forms a durable elastomeric membrane with excellent flexibility and water-proofing properties. The appearance is slightly textured. Water based, does not contain solvents. Easily applicable on dry or moist clean surfaces. It is not effected from UV radiation due to the special polymers found in its ingredients. Avoids the formation of extreme heating by reflecting 80% of the sun rays. ISONEM BE 90, is white and can be colored upon request. Area of use: Exterior: Roofs. Substrates: Concrete, masonry, woodwork, tiles, steel, PU foam, etc.

ISONEM PHOSPHORESCENT is ready to use paint which stores energy from day light or any other illumination source in it and releases in the form of glowing light (luminates in the darkness) . The glow can last between 1-24 hours depending on application conditions. Storing of light is achived by natural sunlight or any other light source. When the light source is extinguished or when the place falls darkness it re-emits the light. It luminates in the dark. USING AREAS: ISONEM PHOSPHORESCENT helps to empty buildings in short times in the case of eartquake, fire etc. when the lights went off. It provides leaving from places safely with the aid of warning and guidance lines made by using ISONEM PHOSPHORESCENT. In movies, hypermarkets, buildings, hotels, workplaces, offices for decorative reasons. The product is used places like residence buildings, industrial and trade complex systems, bridges, girders, roof counterforts, construction sites. Application is suitable on new and old reinforced

ISONEM POOL product is the swimming pool paint consisting of single component in blue color based on resin, it is not affected by the water and the water pressure. ISONEM POOL is very ideal to use in swimming pools and decorative pools particularly in the cases where the ceramic covering is unable to apply. It gives a homogenous blue appearance on the surface. It is elastic thus shows no crack, it is not affected by the UV lights and the swimming pool chemicals, it gives high resistance against alkali and chloride. It shows no color pate, no effect under water, no abrasion. It doesnt produce bacteria. The workmanship is very easy and economic. Using Areas: - Concrete, piaster and alum- Swimming pools, water tanks, water storages- Metal tanks and water barrels- Decorative pools, small lakes, barrages, water canals- Purification sites and balance warehouses

ISONEM D 10 is a liquid product, which is added into mortar or applied onto tthe surface for the applications such as ceramic workd or the insulations based on concrete, plaster, alum, cement, provides the mortar with the adhesion resitance, flexibility and the feature increasing the adherence. Using areas: - Any kind of cement mortars- Plaster and albums- Mortar of faience, ceramic adhesives- Repair adhesives, cold joint fillers- Places where the adherence requied in scope of concerte repair works- Sprinkling pratices bofore plastering- As the undercoating layer before insulation applications

ISONEM Company manufactures construction chemicals, isolation products, coatings, adhesives, paints and special chemicals in Izmir, Turkey. ISONEM Liquid Rubber is modified bitumen emulsion based coating with 700% elasticity. Forms a waterproof and seamless coating when dry after the application. Retains its specifications in the temperature range of-20C to + 80C Due to its resistance to UV and sunlight, can be used with full confidence even on places such as terraces and roofs that are under exposure to intense sunlight. Features very high flexibility and crack-bridging ability. For more detailed information please contact with our company.

A premium quality, durable, elastomeric polyurethene based, two components, waterproofing roof coating. It has excellent adhesion to all types of roofing materials. USING AREASBuilt-up Roofs, Metal Roofs, Plastic Panels, Polystyrene & Urethane Foam, Mobile Home Roofs, Gravel Roofs, Asphalt Shingle Roofs, concrete, modified bitumen and Galvanized metal roofs. For homes, condominiums, apartments, warehouse, commercial buildings, hotels, office buildings and factories etc.