Hydraulic Equipment

12T, G.W.: 40kg, N.W.: 38kg, package size: 63x54x18.5cm 16T, G.W.: 62kg, N.W.: 60kg, package size: 68x61x21cm, 34x30x16cm Packing: Export carton

Feature: 1)Machined from high yield , turned , ground and polished c-1045 microalloy steel. Hard chrome plated , a minimum of 25-30 micrometer diametrically to insure superior cylinder operation and life 2)Used for hydraulic cylinder and air cylinders 3)100% inspection before shipping.

Model: ST0202 Lifting Weight: 2MT Min. Height: 158mm Lifting Height: 90mm Adjust Height: 60mm Max. Height: 308mm Net Weight: 2.3kg Qty: 10pcs/ctn Gross Weight: 25kgs/ctn Meas.: 52cmx25.5cmx19cm 20' container: 6250pcs

SP series is a kind of pump whose impeller is Stainless steel,its most material is ss,ss coupling,shaft,bearing,pump shell,gasket,spcaer,screw and spacer,middle bearing,middle shaft liner,cable protecting mask,which will be corrosion resistant ,long lifer span and high head with same flow ,horsepower,it has 4sp2\3\5\8\14 SP series submersible motor characteristics: All stainless steel anti corrosion structure High efficient water power model impeller Application of sand resistant structure Stainless steel spline shaft, easy connection of the motor Easy installation and maintenance High abrasion resistance, run dry working structure Small volume, big capacity Environmental design, free of pollution

6-INCH ANTI-SAND SHIELD SUBMERSIBLE PUMP FOR SAND WELL 5-60HP THREE-PHASE APPLICATION DATA: Data in application: mechanical sealplus carborundum seal system BASIC FEATURES: Unique ant-sand seal system Full speed 287RPM(50Hz)design point Maximum temperature winding wire NEMA class 200 Free of mark, anti-track self-healing resin system Hemetically-sealed windings to make sure the long life span Double flanged shaft deign for easy installation Corrosion-resistant exterior Epoxy coated end frames Maximum shaft/coupling contact with stainless steel spline shaft Self-adjusting steel/carbon thrust bearing is propitious to water lubricated motor

4INCH SP oil cooled stainless steel submersible pump for deep well whose big difference between 4SD stainless steel submersible pump is its material and the pump body,they are with same motor,both of them are oil cooled submersible motor,but for SD series,whose impeller is Plastic and for SP series whose impeller is Stainless steel and for SP ,this is their big difference and of course the structure of pump body are little different,like SD SERIES.it has suction support,strainer,shaft pin,shim,bushing ,guide bush,bearing bush ,intermediate support,diffuser cover ,sealing gasket,valve seat,outlet,velvet ,impeller ,diffuser and clamping spring. but for SP series,they are suction support,support,Rod,bearing bush,inlet diffuser,shaft,plate,bushing,diffuser,o ring,o ring cover,direct cover,cable cover,check valve seat,check valve cover,clamping ring,outlet ,stationary ring and outlet cover

The stator is externally welded and internally lined with stainless steel, and is also filled and sealed with epoxy resin. Then the products have such features as good sealing performance, corrosion resistance, quick heat elimination, deep-water pressure resistance, long life span and low cost. The rotor takes the squirrel-cage type. The tank is molded with high quality aluminum ingot or circumferentially welded with copper stripe and copper ends, so that it is hard to distort or fracture and has good conductibility and high efficiency. The sheet steel has gone through chemical treatments and won't rot. In addition, footstep bearing is adopted that larger axial load can be borne. The motor inside is lubricated and cooled with water, because water won't bring pollution and special maintenance is unnecessary. The general dividing depth of this pump can amount to 350 meters, which solves the internal problem of deep-water activities and scientific research.

Detailed Product Description 4" stainless steel submersible pump has such advantages as good sealing performance, corrosion resistance, quick heat elimination, deep-water pressure resistance The rotor takes the squirrel-cage type. The tank is molded with high quality aluminum ingot or circumferentially welded with copper stripe and copper ends, so that it is hard to distort or fracture and has good conductibility and high efficiency. The sheet steel has gone through chemical treatments and won't rot. In addition, footstep bearing is adopted that larger axial load can be borne and special maintenance is unnecessary. The motor inside is lubricated and cooled with water. The general dividing depth of this pump can amount to 35 meters. SD series submersible motor characteristics: All stainless steel shell, impeller shaft Abrasion resistant, corrosion-resistant Floating impeller structure, free of axial pressure in working Small caliber, hight lift

6-INCH ANTI-SAND SHIELD SUBMERSIBLE PUMP FOR SAND WELL 5-60HP THREE-PHASE APPLICATION DATA: Data in application: mechanical sealplus carbouundum seal system BASIC FEATURES: Unique ant-sand seal system Full speed 287RPM(50Hz)design point Maximum temperature winding wire NEMA class 200 Free of mark, anti-track self-healing resin system Hemetically-sealed windings to make sure the long life span Double flanged shaft deign for easy installation Corrosion-resistant exterior Epoxy coated end frames Maximum shaft/coupling contact with stainless steel spline shaft Self-adjusting steel/carbon thrust bearing is propitious to water lubricated motor

4-INCH STAINLESS STEEL SHIELD SUBMERSIBLE MOTOR SINGLE-PHASE:115V?230V?60Hz; 220V-50Hz THREE-PHASE:200V?230V?380V?460V?575V?60Hz; 380V-415V?50Hz APPLICATION DATA: These motors are built for dependable operation in 4" diameter or larger water wells, continuing work in 30?. Rotation direction: counter-clockwise facing to axis when single-phase; motor reversal when three-phase. SPECIAL FEATURES: Enhanced anti-corrosion ability by the bottom material and airproof method. BASIC FEATURES: Corrosion-resistant exterior Stainles steel splined shaft Hermetically-sealed windings Anti-track self-healing resin system Filter check valve Water lubrication Pressure-equalizing diaphragm Removable water bloc lead Self-adjusting thrust bearing

4-INCH SHIELD REWINDING MOTOR SINGLE-PHASE:115V?230V?60Hz; 220V?50Hz POWER:0.5Hp-3HP THREE-PHASE:200V?230V?380V?415V?460V?575V?60Hz; 380v-415v?50Hz POWER: 0.5Hp-3Hp APPLICATION DATA: These motors are built for dependable operation in 4" diameter or larger water wells, continuing work in 30C . FEATURES: Good performance when working under water, high pressure resistance, easy maintenance, it is inculding the charateristics of the oil type pump and the water type pump BASIC FEATURES: Corrosion-resistant stainless steel exterior, splined shaft Oil immersed coil Inner temperature senor(Single-phase) Self-adjusting water lubricated thrust bearing Sand resistant and anti-abrasion, free of pollution Pressure-equaling diaphragm Standard NEMA interface

Quality Brake Wheel Cylinders For Lada cars, Such as, 4121616, 331611051A 171611051B, 5987896, etc

Hydron's HEP-112 is designed to produce solid or flux cored rods, wires and bars for further extrusion, drawing, rolling or thinning. Front, as well as side extrusion, can be applied. The press operates in cycles. Each extrusion cycle allows transformation of one solid billet into a thinner solid product or the product with a few(1-5) flux filled cores. Thanks to hinged piston, the cycle time is minimum and the press body is shorter. Together with the HEP-112/72 Press Hydron offers unique in the world pressurized flux feeding system, allowing to monitor flux penetration into the product cores. Thus, the probability of the flux core discontinuity is significantly reduced. HEP-112 Automatic Press is equipped with the programmable logic controller and with the super economical, individual electro-hydraulic supply system HSS-112 with the frequency inverter, as well as efficient and water-saving cooling unit CU-112.

We China Hman Machinery Factory professional manufacturer hydraulic power pack, hydraulic cylinder, linear actuator, tyre mould. Our hydraulic power pack widely used in our lifting equipment, agricultural machine, medical machine, marine equipment, off shore, etc. We are also strong in OEM project with our innovative engineers and specialized machineries. We passed TUV, GE, UL. We are looking forward to do business with you

Brake drum dolly: Key specifications/special features: (1) removes, installs, and transports truck brake drums Without physically having to lift them (2) works on all 15" and 16-1/2" drums fond on Most class 7 and 8 tractor and trailer brake systems. (3) 5" height adjustment aids installation (4) n. W.:24kgs

The second most needed substance in the human body after water is mineral. While the circulation of all nutrition and body wastes is carried out by water, the rate of mineral dissolved in the water plays an important role. Retaining the untouched purity of minerals from seawater and saltpans of nature, We feel you maybe interested in our products and would like to briefly introduce them as follows: [Product] Alkaline Roast Salt Roast salt is made from heating alkaline bay salt with abundant minerals at high temperature, using traditional method preserved from the past Alkaline roast salt, approved by KFDA, is heated over 800C on 100% pure Korea-made bay salt For further information about our company and products, please visit our website or contact us directly.

AS04-B 4TON Stroke:125mm Min.Height:270mm Packing Size:630mm*365mm*175mm New Weight:18KG 20-Inch Container:650PCS

Specifications: 1) Capacity: 3MT,5MT,8MT 2) Minimum height: 620, 630, 630 mm 3) Maximum height: 1150, 1150, 1150mm Inner packing: Color paper box Outer packing: Standard export carton

Specifications: (Without gauge) 1) Model:DL0506,DL0512,DL0520 2) Capacity: 6MT, 12MT, 20MT 3) Qty/20' FCL: 380, 360, 180pcs Specifications: (With gauge) 1) Model:DL0610,DL0612,DL0620,DL0630,DL0650 2) Capacity: 10MT, 12MT, 20MT, 30MT, 50MT 3) Qty/20' FCL: 350, 250, 160, 120, 60pcs

Specifications: 1) Model:DL3005, DL3012,DL3020, DL3022, DL3030, DL3035,DL3050 2) Capacity: 5MT, 12MT, 20MT, 22MT, 30MT, 35MT,50MT 3) Min. height: 210, 250, 260, 270, 280, 280, 280mm 4) Max. height: 430, 480, 490, 500, 470, 470, 470, 470mm 5) Inner packing: Color paper box 6) Outer packing: Standard export carton