Capacitors

Features:1) Non-inductive construction, down-leads axially and horizontally2) Wide capacitance range, small size3) Long lifespan due to self-healing function4) Suitable for blocking, by-pass and coupling of DC and single to VHF range5) Widely used in filter, noise suppression and low pulse circuits6) Capacitance range: 0.01μF - 30μF

Features:1) Wide capacitance range2) Small size3) Long lifespan due to self-healing function4) Suitable for blocking, by-pass and coupling of DC and single to VHF range5) Widely used for filter, noise suppression and low pulse circuitsSpecifications:1) Reference standard: GB10190-88 (IEC 60384-16) 2) Climatic category: 40 / 85 / 213) Rated voltage: 100V, 160V, 250V, 400V, 630V4) Capacitance range: 0.0033 - 6.8uF5) Capacitance tolerance: ±5% (J), ±10% (K), ±20% (M)6) Voltage proof: 1.6Ur (5s)

Features:1) Suitable for high current 2) High insulation resistance3) Long lifespan due to self-healing function4) Can withstand 2.5kV impulse voltage, class X2 5) Across-the-line type noise suppression capacitor, suitable for AC purposeSpecifications: 1) Reference standard: GB/T 14472-1998 (IEC 60384-14)2) Climatic category: 40 / 100 / 213) Rated voltage: AC 280V4) Capacitance range: 0.0022 - 4.7uF5) Capacitance tolerance: ±5%(J), ±10%(K), ±20%(M)6) Voltage proof: 4.3Ur (5s)

foamed violin case with various of designs.

Foamed contrabass case

hot selling model

Feature:1, Small, light weight2, Very low loss, long lifespan, good self-healing3, High insulation resistance, safety and stable.4, Built-in the explosion-proof device and discharge resistance5, Used for grille lamps or energy-saving lamps Specification:1, Climate type: -40/85/212, Capacitance tolerance: ±5%, ±10%3, Testing Voltage: a) Between leading-out: 2Ur, 10S no breakdown b) Between leading-out end and shell: 2000V AC, 10S no breakdown4, Insulation resistance: ≥3,000mΩ5, Tangent of loss angle: ≤0.002 (100Hz)6, Discharge time: T:T ≤50VAC,1min

There plates take advantage of the high rigidity of alumina ceramic plates and carborundum ceramic plates which are compounded with highly rigi PE fibre bulletproof plates through special techniqures. These types of compound bulletproof plates are 30%-40% lighter than the traditional steel bulletproof plates on the same level of ballistic protection. Moreover, these plates are much better in reducing ricochet shots than the traditional steel bulletproof plates.

SADS 001 flap disc is made of crystal alumina abrasive cloth from GermanySADS 003 flap disc is made of alumina abrasive cloth from GermanySADS 006 flap disc is made of alumina abrasive cloth from South KoreaApplications: They are used to grind and polish the planar welding joints and rust removal purposeFeatures: The aylom backing of this prouct can be removed by the methods as show in fig. 1 and all abrasive coth will come out, and then the insert the product into the edges and slot for grinding and polishing till the abrasive cloth runs out.Diameters:4'', 41/2'', 5'', 6'' , 7''Grits:40#~400#Abrasive cloth utilzation ratio: 65% without plastic cover chopped, 95% after the plastic cover chopped.Note: the structures of above models are the same, only the abrasive clothes used are different.

Applications: It is mainly used for the fine polishing the internal surface in the exguous holes, irregular sews and curves.Features: Wth the non-woven web laps, it can meet various precise requirements and glabrous requirements on the polished surfaces.Specifications:Diameters:10,15,20,25,30,40,50,60,80mm ,Width:10,15,20,25,30,40,50,60,80mm and various special specificationsShaft dia.: 3mm or 6mmGrits: 100#~800#

Applications: It is mainly used for finishing small chimbs and crevices on the elbow pneumatic tools.Specifications:Diameters: 30mm, 150pcs/boxGrits: 60#, 100#, 150#, 240#, 400#, 600#It is mainly suitable for the industry: Die processing industry.

Applications and Features: Zirconia alumina grains are mainly used for the rapid cutting and polishing of all kinds of extremely hard metal surfaces.Specifications:4'', 41/2'', 5'', 6'', 7'' in dia.Grits:40#~20#Abrasive colth utilization ratio:95%Note: The flap disc is designed into two types. Flat surface is used to grind surface.Angle face is used to grind surface and some places where is not easy to contact.

A: The fibre abrasive disc is a kind of sheet grinding tool made of the composite material from Europe as the backing and by the special treatment method to grains on to the backing. There are mainly two kinds of roducts: with and without the low-temperature coats.Features: The products with the low-temperature coats are mainly used to grind and polish the strainless steel and very hard alloy materials, it can avoid blackening from frication heat. While the products without the low-temperature coats are mainly used for various non-strainless steel metals and nonmetals.B: The abrasive paper are divided in to dry and waterproof sheets.Grits:60#~3000#

SADS Flap Wheel with Metal CenterApplication: it can be mounted on various automatic and manual lapping machines for grinding and polishing operations, suitable for all sorts of metals.Features: It has the sharp grinding and cutting blades and high security and is ideal for surface polish of metals.Specifications: Diameters:2''~20'', Width:3/4''~7'' and various specific specificationsGrits:40#~88#SADS Flap Wheel with Plastic CoreFeature: It is poured and injected for molding directly once with high-temperature glue, so that the safety and the adaptability for various specifications of middle holes have been improved.Specifications: Width:1'',2'' and other specifications, Diameters:4'',6'',8'',10'',12'' andother specificationsGrits:40#~400#

Diameters:1/2'', 5/8'', 3/4', and 1''Grits:40#~400#

Feature: made of German ALX63 abrasive clothDiameters: 4'', 5'', 6'', and 7''Grits:60#-~320#

CBB 60 Running Capacitor with 12uf and good function.

CD60 function capacitor. From 100MFD-800MFD

1×2× No. of pairs×2×nominal cross sectional area(mm2)JHYJQ85/SCJHYJZPQ85/SCJHYJPQ85/SCCalculated diameter(mm)Calculated mass (kg/km)Calculated diameter(mm)Calculated mass (kg/km)Calculated diameter(mm)Calculated mass (kg/km)2*2*0.358.49.3809.310.31149.110.11056*2*0.3510.912.014311.812.918912.013.120510*2*0.3512.914.120213.714.925614.315.529914*2*0.3514.315.525415.016.336415.817.1386 24*2*0.3517.719.138718.620.048420.021.563130*2*0.3519.721.248920.522.059522.023.676344*2*0.3523.024.766623.725.479025.827.6106248*2*0.3523.925.671724.626.384526.828.711472*2*0.59.110.19410.311.313510.011.01246*2*0.512.013.117513.214.423213.414.624910*2*0.514.315.525115.416.731916.017.336814*2*0.515.817.131917.018.339518.119.550024*2*0.520.021.551721.423.064122.624.278530*2*0.522.023.662123.425.175924.926.6952

Main technical parameter 1.electric capacity±5% 2.rated voltage250VAC550VAC 3.rated frequency50/60Hz single phase 4.voltage bearingelectrode to electrode 1.75Un,2s electrode to shell 2000 VAC,2s 5.wasting angle tangent≤0.2% 6.insulation resistorterminal to terminal≥3000MΩ.μF terminal to shell≥2000MΩ