Capacitors

Main technical parameters:1) Usage environment:     a) Surrounding temperature: -40~ 50°C    b) Humidity: <85%    c) Altitude: <2,000m2) Rated voltage: 400V~690V3) Rated capacity: 3 - 40kVAr4) Capacity deviation: -5~+10%5) Withstand voltage between the poles: 5s if the voltage between the poles is 2.15V6) Maximum permitted over-voltage: 1.10V over rated voltage7) Permitted over-current: 1.30A (as the rated current)8) Automatic discharge: less than 50V in 3min after power broke down 9) Conforms to the standards of GB12747-2004 and IEC60831-1996

It is a kind of new anti-explosion safe capacitor with the advantages of low dissipation, little temperature increasing, small dimension, high rated voltage. It keeps an open-circuit mode when failed. It is suitable to be used in home electric moror starting and running.

The capacitor has advantages of low dissipation factor, high insulation resistance, good self-healing character, steady function, resisting flowing current and high carrying capability etc. It is suitable for washers and detached horse-power motors and beneficial to the motor starting and running.

The capacitor has advantages of low dissipation, high insulation resistance, good self-healing character, and steady electricity performence, anti-striking current, strong over-carrying capacity, etc. It is safe and reliable with inner anti-explosion device and with outer discharge resistance. It is applied in lighting metal halide lamp for the help of the starting and running.

This type capacitor is newly developed by our company, which combines the capacitor of air-conditioner compressor and of fan motor. Besides all the advantage of CBB65 AC motor capacitor, it also has advantages of small dimension and convenient installation.

FEATURES

Features:High volumetric efficiency Excellent electric characteristics in non-inductive construction Wide range for automatic insertionRecommended Applications:General pirpose usage Noise suppression for logic circuitSpecifications:  Category temp.range(Including temperature-rise on unit surface)-40 to +105oCRated voltage50VDC,63VDC,100VDC(Derating of rated voltage by2.5%/oC at more than 85oC)Capacitance range0.01 to 2.2ufCapacitance tolerance±5%(J)Dissipation factor1.0%max.(20oC 1KHZ)Withstand voltageBetween terminals:Rated volt.(VDC)×150% 60SInsulation resistanceC≤0.33UF:3000MΩmin.(20oC,50VDC 60s ECQV1H,ECQV1J)C>0.33uf:1000MΩ.uf min.(20oC,100VDC 60s ECQV1)

INTRODUCTION:These ceramic disc capacitors are specifically designed for AC applications and meet the safety requirement of various safety standards agencies.these capacitors are ideal for across the line and line by-pass applications.  Operating temperature range-25 to 85oCCapacitance range100pf to 4700pfCapacitance tolerance K= ±10%,M= ±20%Rated voltage125,250 and 400VAC,Please refer to table for approval file numberTemperature coefficient ±10%for B(Y5P),+30 to -80%for E(Y5V)Disspation factor(tanδ)Y5P:2.5%max.at 25 and 1 KHZ,1± 0.2Vrms.Insulation resistance at 25oC10000MΩ at 500VDC for 1 minuteDielectric strength1500VAC for 60seconds-AC 125V,AC 2502600VAC for 60seconds-AC 400V.

Operating Temperature Range:-25oC to 85oCCapacitance :Within tolerance at 1 MHZ and 25oCCapacitance Tolerance:0.5 to10pf:0.25pf,above 10pf;±5%  ±10% aboveRated voltage:50,100,VDCTest Voltage:3 times rated voltage for 1.5secInsulation Resistance:10,000MΩmin at WVDC.60sec

Main CharacteristicsAmbient temperature:-40~70oCRated voltage:250VAC,450VACPermissible tolerance of capacitance:±5%,±10%Dielectric strength:T.T:Withstand 2 times AC working voltage for 2 secs without puncture and arcing.Insulation resistance:T.T≥1000MΩDissipation factor:tgσ≤0.002(50HZ)

FEATURESBox type provides the identical outerappearanceVery low loss at high frequency, suitablefor high currentHigh insulation resistance,long life due toself-healing effectSPECIFICATIONSReference StandardGB/T14472(IEC 60384-14)Climatic Category40/100/21Rated Voltage300VACCapacitance Range0.0022-1.0ufCapacitance Tolerance+/-5%(J)Voltage Proof4.3UR(5S)Dissipation Factor≤0.3%   20ºC .10KHZInsulation ResistanceCR≤0.33uF,≥15000MΩCR>0.33uF,≥5000S         (20oC,1min)

FEATURES

 SPECIFICATIONS:

 FEATURE

FEATURES

We could provide high quality E-caps ranging from 1uF to 100uF/200V/250V/400V/450VBXA Series Features:1) Load life of 6,000 - 8,000 hours at 105°2) Excellent endurance of high frequency ripple current and high temperature3) Best suited for energy-saving lights and ballastsSpecifications:1) Operating temperature range: -40°C ~ +105°C2) Rated voltage range: 200 - 450V DC3) Capacitance tolerance: -20% ~ +20% (20°C 120Hz)4) Leakage current: I=0.03CV (after 2 minutes' application of rated voltage)5) Dissipation factor: rated voltage (V): 200, 250, 400, 450; (tgδ): 0.10, 0.10, 0.10, 0.126) Load life: after 6,000 hours of test time, capacitors meet the characteristics requirements listed below7) Capacitor change: within -30% ~ +30% of initial value8) Dissipation factor (Tanδ): 300% or less of initial value specified value9) Leakage current: 200% or less of initial value specified valuePacking:Standard cxport packing, carton

We can provide high quality E-caps ranging from 1uF to 100uF/200V/250V/400V/450V.BXA series features:1) Load life of 6,000 - 8,000 hours at 105°2) Excellent endurance of high frequency ripple current and high temperature3) Best suited for energy-saving lights and ballastsSpecifications:1) Operating temperature range: -40°C ~ +105°C2) Rated voltage range: 200 - 450V DC3) Capacitance tolerance: -20% ~ +20% (20°C 120Hz)4) Leakage current: I=0.03CV (after 2 minutes' application of rated voltage)5) Dissipation factor: rated voltage (V): 200, 250, 400, 450; (tgδ): 0.10, 0.10, 0.10, 0.126) Load life: after 6,000 hours of test time, capacitors meet the characteristics requirements listed below7) Capacitor change: within -30% ~ +30% of initial value8) Dissipation factor (Tanδ): 300% or less of initial value specified value9) Leakage current: 200% or less of initial value specified value

We can provide high quality E-caps ranging from 1uF to 100uF, 200V / 250V / 400V/ 450V.BXA series features:1) Load life of 6,000 - 8,000 hours at 105°2) Excellent endurance of high frequency ripple current and high temperature3) Best suited for energy-saving lights and ballastsSpecifications:1) Operating temperature range: -40°C ~ +105°C2) Rated voltage range: 200 - 450V DC3) Capacitance tolerance: -20% ~ +20% (20°C 120Hz)4) Leakage current: I=0.03CV (after 2 minutes' application of rated voltage)5) Dissipation factor: rated voltage (V): 200, 250, 400, 450; (tgδ): 0.10, 0.10, 0.10, 0.126) Load life: after 6,000 hours of test time, capacitors meet the characteristics requirements listed below7) Capacitor change: within -30% ~ +30% of initial value8) Dissipation factor (Tanδ): 300% or less of initial value specified value9) Leakage current: 200% or less of initial value specified value

CDT03 features:1) Load life of 4000 hours at 125 degrees2) Excellent endurance of high frequency ripple current and high temperature3) Best suited for energy-saving lights, ballasts Specifications:1) Operating temperature range: -40 - +125°C2) Rated voltage range: 200 - 450V DC3) Capacitance tolerance: -20% - +20% (20°C 120Hz)4) Leakage current: I=0.02CV (after 2 minutes' application of rated voltage)5) Dissipation factor: a) Rated voltage (V): 200, 250, 400, 450 b) (tgδ): 0.10, 0.10, 0.12, 0.126) Load life: after 4,000 hours of test time, capacitors meet the characteristics requirements listed below7) Capacitor change: within -30% - +30% of initial value8) Dissipation factor (Tanδ): 300% or less of initial value specified value9) Leakage current: 200% or less of initial value specified value

We can provide high quality E-caps 1uF to 100uF/200V/250V/400V/450V CDT02.Features:1) Load life of 8,000-10,000 hours at 105 degrees2) Excellent endurance of high frequency ripple current and high temperature3) Best suited for energy-saving lights, ballasts and switch power supplySpecifications:1) Operating temperature range: -40-+105°C2) Rated voltage range: 200-450V DC3) Capacitance tolerance: -20%-+20% (20°C 120Hz)4) Leakage current: I=0.02CV (after 2 minutes' application of rated voltage)5) Dissipation factor: rated voltage (V): 200, 250, 400, 450; (tgδ): 0.08, 0.08, 0.08, 0.106) Load life: after 8,000 hours of test time, capacitors meet the characteristics requirements listed below7) Capacitor change: within -30% to +30% of initial value8) Dissipation factor (tgδ): 300% or less of initial value specified value9) Leakage current: 200% or less of initial value specified value