Capacitors

There plates take advantage of the high rigidity of alumina ceramic plates and carborundum ceramic plates which are compounded with highly rigi PE fibre bulletproof plates through special techniqures. These types of compound bulletproof plates are 30%-40% lighter than the traditional steel bulletproof plates on the same level of ballistic protection. Moreover, these plates are much better in reducing ricochet shots than the traditional steel bulletproof plates.

SADS 001 flap disc is made of crystal alumina abrasive cloth from GermanySADS 003 flap disc is made of alumina abrasive cloth from GermanySADS 006 flap disc is made of alumina abrasive cloth from South KoreaApplications: They are used to grind and polish the planar welding joints and rust removal purposeFeatures: The aylom backing of this prouct can be removed by the methods as show in fig. 1 and all abrasive coth will come out, and then the insert the product into the edges and slot for grinding and polishing till the abrasive cloth runs out.Diameters:4'', 41/2'', 5'', 6'' , 7''Grits:40#~400#Abrasive cloth utilzation ratio: 65% without plastic cover chopped, 95% after the plastic cover chopped.Note: the structures of above models are the same, only the abrasive clothes used are different.

Applications: It is mainly used for the fine polishing the internal surface in the exguous holes, irregular sews and curves.Features: Wth the non-woven web laps, it can meet various precise requirements and glabrous requirements on the polished surfaces.Specifications:Diameters:10,15,20,25,30,40,50,60,80mm ,Width:10,15,20,25,30,40,50,60,80mm and various special specificationsShaft dia.: 3mm or 6mmGrits: 100#~800#

Applications: It is mainly used for finishing small chimbs and crevices on the elbow pneumatic tools.Specifications:Diameters: 30mm, 150pcs/boxGrits: 60#, 100#, 150#, 240#, 400#, 600#It is mainly suitable for the industry: Die processing industry.

Applications and Features: Zirconia alumina grains are mainly used for the rapid cutting and polishing of all kinds of extremely hard metal surfaces.Specifications:4'', 41/2'', 5'', 6'', 7'' in dia.Grits:40#~20#Abrasive colth utilization ratio:95%Note: The flap disc is designed into two types. Flat surface is used to grind surface.Angle face is used to grind surface and some places where is not easy to contact.

A: The fibre abrasive disc is a kind of sheet grinding tool made of the composite material from Europe as the backing and by the special treatment method to grains on to the backing. There are mainly two kinds of roducts: with and without the low-temperature coats.Features: The products with the low-temperature coats are mainly used to grind and polish the strainless steel and very hard alloy materials, it can avoid blackening from frication heat. While the products without the low-temperature coats are mainly used for various non-strainless steel metals and nonmetals.B: The abrasive paper are divided in to dry and waterproof sheets.Grits:60#~3000#

SADS Flap Wheel with Metal CenterApplication: it can be mounted on various automatic and manual lapping machines for grinding and polishing operations, suitable for all sorts of metals.Features: It has the sharp grinding and cutting blades and high security and is ideal for surface polish of metals.Specifications: Diameters:2''~20'', Width:3/4''~7'' and various specific specificationsGrits:40#~88#SADS Flap Wheel with Plastic CoreFeature: It is poured and injected for molding directly once with high-temperature glue, so that the safety and the adaptability for various specifications of middle holes have been improved.Specifications: Width:1'',2'' and other specifications, Diameters:4'',6'',8'',10'',12'' andother specificationsGrits:40#~400#

Diameters:1/2'', 5/8'', 3/4', and 1''Grits:40#~400#

Feature: made of German ALX63 abrasive clothDiameters: 4'', 5'', 6'', and 7''Grits:60#-~320#

CBB 60 Running Capacitor with 12uf and good function.

CD60 function capacitor. From 100MFD-800MFD

1×2× No. of pairs×2×nominal cross sectional area(mm2)JHYJQ85/SCJHYJZPQ85/SCJHYJPQ85/SCCalculated diameter(mm)Calculated mass (kg/km)Calculated diameter(mm)Calculated mass (kg/km)Calculated diameter(mm)Calculated mass (kg/km)2*2*0.358.49.3809.310.31149.110.11056*2*0.3510.912.014311.812.918912.013.120510*2*0.3512.914.120213.714.925614.315.529914*2*0.3514.315.525415.016.336415.817.1386 24*2*0.3517.719.138718.620.048420.021.563130*2*0.3519.721.248920.522.059522.023.676344*2*0.3523.024.766623.725.479025.827.6106248*2*0.3523.925.671724.626.384526.828.711472*2*0.59.110.19410.311.313510.011.01246*2*0.512.013.117513.214.423213.414.624910*2*0.514.315.525115.416.731916.017.336814*2*0.515.817.131917.018.339518.119.550024*2*0.520.021.551721.423.064122.624.278530*2*0.522.023.662123.425.175924.926.6952

Main technical parameter 1.electric capacity±5% 2.rated voltage250VAC550VAC 3.rated frequency50/60Hz single phase 4.voltage bearingelectrode to electrode 1.75Un,2s electrode to shell 2000 VAC,2s 5.wasting angle tangent≤0.2% 6.insulation resistorterminal to terminal≥3000MΩ.μF terminal to shell≥2000MΩ

specify  product  use  characteristic:  1.Is  suitable  in  the  washer,Small  electrical  machinery  and  so  on. 2.The  volume  is  small,The  weight  is  light.  3.High  dielectric  resistance,Low  loss,Safe  is  reliable Its products have successively attained the authentication of CQC UL VDE CE andCB RongShengDaimplements the requirements of ISO9001qualitysystem strictly and its general strength stands at the front of its brothers in Anhui.

1.  APPLICATIONSTHE TYPE MKP CAPACITORS are ideal for using Line-by-Pass, Antenna coupling, Across the line and spark killer circuits and available for EMI filter and 0switching power supply application. 2.SPECIFICATIONS 

1.  APPLICATIONSTHE TYPE MKP CAPACITORS are ideal for using Line-by-Pass, Antenna coupling, Across the line and spark killer circuits and available for EMI filter and 0switching power supply application. 2.SPECIFICATIONS 

  Double layer capacitor1.Usage:Power or back-up power for Video/CMOS/RAM/VCR/Digital  camera / Printer/Hand-set Scanner/Mobile phone/Computer /LED/Relay/Consumption Elec-ectronics/Wireless Communications/Buzzer/Toys and so on.2.    Basic characteristic2.1  Nominal Voltage :      5.5V2.2  Nominal Capacity:      1F2.3  Nominal inner impedance:  ≤35Ω2.4  Weight:                8.5±0.2g3.Size   Diameter:             20.8±0.1mm   Height:                 7.2±0.2mm4.Color                        Black5

  super capacitor1.Usage:Power or back-up power for Video/CMOS/RAM/VCR/Digital  camera / Printer/Hand-set Scanner/Mobile phone/Computer /LED/Relay/Consumption Elec-ectronics/Wireless Communications/Buzzer/Toys and so on.2.    Basic characteristic2.1  Nominal Voltage :      5.5V2.2  Nominal Capacity:      1F2.3  Nominal inner impedance:  ≤35Ω2.4  Weight:                8.5±0.2g3.Size   Diameter:             20.8±0.1mm   Height:                 7.2±0.2mm4.Color                        Black5.Specif

Super capacitor SR2R5223Z 2.5V/2.2F

1). Climate type: 25 / 85 / 21 (2) Capacitance tolerance: ±5%, ±10% (3) Testing voltage: (a)       Between leading-out: 1.75UR, 10S no breakdown (b)       Between leading-out end and shell: 2,200V AC, 10S no breakdown (4) Insulation resistance: (a)       Between leading-out ends: ≥3,000MΩ (b)       Between leading-out end and shell: ≥1,000MΩ (5) Tangent of loss angle: tgδ≤0.002 (50Hz) (6) Used especially for micro water pumps, cleaning machines, washing machines and single-phase water pump motors (7) Small and lightweight (8) Long lifespan and good self-healing