Circuit Breaker

The product which can meet the requirements of modern industrial technical demandand supporting need with various varieties and complete specification is producedstrictly according to national standard and IEC standards. Its quality enjoyshigh reputation both at home and abroad. Our sales network can be found all overthe country and our products are exported all over the world.

NF-CW series moulded case circuit breaker(below for short MCCB,ELCB) is applicable circuit of AC 50Hz(or 60Hz), rated insulation voltage 690V, rated operating voltage up to 660V(690V), rated operating voltage up to 250V(DC). The rated operating current 3A-800A, for distribute energy of electricity and infrequent making and breaking circuit, and infrequent starting of motor(rated operating current up to 400A).At normal condition, they are provided with the function of the protection against overload adn short-circuit and undervoltage.Our MCCB comply with standard of IEC947-2,GB14048.2 and so on.

AM10(hager)series MCCB, it's applicable circuit of AC 50/60Hz, rated insulation voltage 690V, rated current 16-400A. for distribute energy of electricity & infurequent making & breaking circuit. In normal conditions, protecting when circuit are overload, short circuit and lacking voltage. The product conforms to GB14048.4, IEC60947-2 standards.

AM7(TERASAK1,XE)series MCCB, it's applicable circuit of AC 50Hz, rated insulation voltage 660V,rated operating current 15-125A, for distribute energy of electricity and infrequent making & breaking circuit, in normal conditions. The products conforms to GB14048.2, IEC60947-2 standards.

AM5(MEM)series MCCB.it's applicable circuit of AC 50/60Hz, rated insulation voltage 690V,rated current 16-250A, for distribute energy of electricity & infrequent making & breaking circuit. In normal conditions,the products conforms to GB14048.2, IEC60947-2 standards.

AM3(ABB-S, HSM1,HM3)Series moulded case circuit breaker, It's applicable circuit of AC 50Hz(or 60Hz),rated insulation voltage 660V, rated operating voltage under AC 660V, 250V(DC), rated operating current 10A-800A,for distribute energy of electricity and infrequent making and breaking circuit. In normal conditions , the MCCB rated current under 400A they are provided with the function of the protection against overload and short circuit and undervoltage. The MCCB complies with standard of IEC947-2, GB14048.2, GB14048.4 and so on.

AM1 series of moulded case circuit breaker is one of our new type products developed and manufactured by adopting international advanced technology. It is supplied with rated insulating voltage 800V and used for circuit of A.C.50Hz, rated operating voltage AC 400V.(or below), rated operating current up to 800A for infrequent over and starting of the motors. Equipment with the protection devices for over-current, short circuit and undervoltage, the products are capable of preventing damage of circuits and supply units. The products conforms to GB14048.2, IEC60497-2 standards

Exchange non-clearance metal oxidate matter arrester is suitable for the voltage protection of transformer switch cupboard, vacuum switch etc.And iy used in the power station! Condition: 1.Applicable for indoor or outdoor 2.Wind velocity: 35m/s 3.Elevation above sea level: not exceeding 1000m 4.Ambient temperature: -40°C 5Frequency:50HZ

Rated voltage:230/110V Rated frequency:50/60Hz Hammer time:1400 min-1 Full accessories: 1- pc point chisel ,1- pc flat chisel 1- pc oil pot, 1- pc hex key 1- pc oil spanner metal carrying case

Thermostat.Fan Heater,Panel Heater,Semiconductor,Thermostat Regulator,temperature ControllerNTL-10A: Thermostat (NC), which is contact maker for regulating heaters.NTL-10B: Thermostat (NO), which is contact maker for regulating filter fans and heatexchangers or for switching signal device when temperature limit has been exceeded.Main Feature:1. Switch temperature difference: 7K(+/- 4K tolerance)2. Sensor element: thermostatic bimetal3. Contact type: snap-action contact4. Contact resistance: < 10m ohm5. Service life: >100,000 times6. Max.switching capacity: 250VAC, 10(2) A 120VAC, 15(2) A DC 30W7. Mounting: clip for 35mm DIN rail.

Thermostat.Fan Heater,Panel Heater,Semiconductor,Thermostat Regulator,temperature ControllerNTL-10A: Thermostat (NC), which is contact maker for regulating heaters.NTL-10B: Thermostat (NO), which is contact maker for regulating filter fans and heatexchangers or for switching signal device when temperature limit has been exceeded.Main Feature:1. Switch temperature difference: 7K(+/- 4K tolerance)2. Sensor element: thermostatic bimetal3. Contact type: snap-action contact4. Contact resistance: < 10m ohm5. Service life: >100,000 times6. Max.switching capacity: 250VAC, 10(2) A 120VAC, 15(2) A DC 30W7. Mounting: clip for 35mm DIN rail.

Thermostat.Fan Heater,Panel Heater,Semiconductor,Thermostat Regulator,temperature ControllerNTL-10A: Thermostat (NC), which is contact maker for regulating heaters.NTL-10B: Thermostat (NO), which is contact maker for regulating filter fans and heatexchangers or for switching signal device when temperature limit has been exceeded.Main Feature:1. Switch temperature difference: 7K(+/- 4K tolerance)2. Sensor element: thermostatic bimetal3. Contact type: snap-action contact4. Contact resistance: < 10m ohm5. Service life: >100,000 times6. Max.switching capacity: 250VAC, 10(2) A 120VAC, 15(2) A DC 30W7. Mounting: clip for 35mm DIN rail.

Features: Mode XLDW1(DW45): 1) Rated power: AC 50Hz, 400V, or 690V 2) Rated current: 400 - 6,300A 3) It is mainly used in power distribution network to allocate electric power and Protect the line and supply equipment against overload, under voltage, short Circuit, and single phase grounding fault 4) The core part of the circuit breaker adopts intelligent type dropout device, Which bears accurate alternative protection performance and can avoid Unnecessary power failure, thus improve the reliability of power supply

DZ47-63 Series circuit breaker Frequence: 50HZ/60HZ single-pole 240V ,415V Current:1-40,50-60A equipment and lighting circuit in normal case.This product conform to GB10963,IEC60898,BS3871,

Pole:2,3,4Rated voltage (Un): 230(240)/400(415)V AC, max. 60V DCRated current (In): 0.5-63A Rated frequency (Fn):50Hz Rated breaking capacity:10KA Energy limiting class:3 Tripping characterisic:B,C,D Cross-section of connecting lead:1-25mm2 Isolating class:BMounting on the rail:EN50022 Built-in width:18mm/poleStandard: IEC60898, EN60898