Contactor

CXC2-A1 series auxiliary contact blocks are installed on the top of CXC2-A2 control relay or CXC2-D AC contactor for more auxiliary contacts. Adopting the contact functions of sliding frictions, the item can be self-cleaning and ensure the electric circuit to be reliable.

CXC4-F AC contactor applies to supply of AC 50/60Hz, rated voltage up to 660V. In AC 3 use, under voltage of 380V, the rated current can be up to 630A. CXC4-F and CXR4 overload relay can form motor starter to protect the motors against overload and phase failure. The product is tested according to IEC 60947-4. The contactor features double breaking contacts. Arc distinguish chambers are used to quench the arc in contactors of 32A and above. The contactors below 32A can be mounted on DIN rail or by screw, the bigger ones can only be mounted by screw.

CXCJ19 capacitor switching contactor is improved design of our company, which can be used in circuit of 500V and below, to make and break the parallel connected self-healing capacitor for power factor compensation. The contactor has upsurge suppress device which can reduce the surge to the capacitor while making and can reduce over voltage while breaking.

CXC2-F series AC contactor is applicable to the circuits up to the rated voltage 1000V AC 50Hz or 60Hz, rated current up to 780A, for long distance breaking circuit and frequently starting or controlling the motor. It also can be used for the control of distribution circuits of rated current from 200A to 1600A.

CXC2-D AC contactor is suitable for using in the circuits up to the rated voltage 660V AC 50Hz or 60Hz, rated current up to 95A, for making, breaking, frequently starting & controlling the AC motor. Combined with the auxiliary contact block, timer delay & mechanical-interlocking device etc, it becomes the delay contactor, mechanical interlocking contactor, star-delta starter. With the thermal relay, it is combined into the electromagnetic starter. The contactor is produced according to IEC60947-4.

Voltage: 120frequency: 208/240 HZNunber of Poles: 3Full Load: 25,30,40,60 ALine Voltage: 240/277, 480,600 vLocked Rotor: 120~360AResistive Amp Rating : 40~75Maximum HP:Voltage: 110/120, 200/208, 240/277Single Phase: 2~10Three Phase   10~25  

ACR1 Series Permanent-Magnet AC Contactor ACR1 Series Permanent-Magnet A.C. Contactor is developed and manufactured by our company in 2006. This series contactor not only make up common contactors shortcomings of loud noise and power consuming, but also are one of the energy saving and cost reducing electrical products that are highly advocated by our country. They are very useful and very necessary to be recommended in power industry. 2. Application ACR1 Series Permanent-Magnet A.C. Contactor is suitable for use in the A.C. circuits up to rated voltage 1000V, AC 50Hz or 60Hz, and conventional thermal current to 630A. It is mainly used for closing & breaking circuits at a long distance, for frequent starting & controlling A.C. motors, and can also be used in combination with thermal relay or electronic protector to compose an electromagnetic starter. This kind of contactor can protect the circuits of overload and phase losing, and be composed into Reversible switch machine interlock

YLK40 Series Alternating Contactor YLK40 series products are a new type alternative contactor (contactor in brief hereinafter), which was trial-manufactured and carried out recently by our company. It can be used for the circuit switching-on and switching-off in the electric system of alternating frequency 50Hz, setting voltage of main contact terminal up to 660V and working current up to 500A and it can become the motor starter, combining with the proper overheat relay or electronic protection device to protect the over load circuit in the operation. Because they adopted the new type system of arc extinguishing cover and connection terminal, YLK40 series products own the advantages of lower volume, higher ability of switching-on and switching-off, shorter safety area (arcing-over distance) and so on over the other domestic series contactors and become the ideal products chosen in the electric system.

Advanced technology Adopted the most advanced "Insilteck" technology, the pipe poses the anti-ultraviolet (UV) rays. Reliable quality The imported producing equipments and pipe materials make the product being of high temperature endurance, anti-freezing and high pressure resistance 1.25Mpa. Meet the GB/T1 8992-2003 Standard. Nice appearance. Long service time, more then 50 years of usage time. Sanitation It has passed test by the National Medical Scientific Institution, which indicate that the pipe is a kind of trustable drinking water pipe. Convenient Installation Standard connection units make the installation for solar water heater with much more easiness and convenience.

AE-Q is a series of 2-way and 3-way motorized ball valves intended for use in heating and cooling system. Suitable for hot and chilled water; size from DN15 up DN32 1.Smooth flow, no clog 2.High flow capability, 3 times flow rate more then traditional zone valve 3.Kvs=21m3/h 3/4", suitable for any specifications of fan coil unit. 4.Tight close, no leakage 5.Optional manual lever for convenient operation when power is off. 6.The power is automatically cut off when the valve reaches the on/off position. This ensures long life service for actuator. 7.Suitable for both vertical and horizontal installation 8.Technical Data Valve type .....................2way/3way ball valve Pressure class...............PN16(1.6MPa) Supply Voltage ..............220VAC+/-10% 50/60Hz Connection.................... inner thread Fluid temperature............0C-95C Ambient Temperature.........65C Relative Humidity............max95% Valve body.....................Bronze Protection Class.............IP55

Description: Glass-ceramic cooktop panels, developed specifically for use in the kitchen. They have been developed to stand up to the daily wear and tear and are particularly distinguished by their high heat transmission and low thermal expansion. The smooth, non-porous surface is easy to clean and helps maintain your cooktop panel in excellent condition for a long time to come. Beautifully designed and technically perfect, your cooktop panel adds to the attractive appeal of your kitchen. are made of a special glass-ceramic, a material with fascinating properties.

SGM-D series AC Contactor is suitable for using in the circuits up to the rated voltage 660V AC 50Hz or 60Hz, rated current up to 620A, for making, breaking, frequently starting & controlling the AC motor. Combined with the auxiliary contact block, timer delay & machine-interlocking device etc, it becomes the delay contactor, mechanical interlocking contactor, star-delta starter. With the thermal relay, it is combined into the electromagnetic starter. The products comply with IEC60947-4. Spec: SGM-D09, 12,18,25,32,40,50,65,80,95

We can supply high qaulity contactors.

Features: 1) Used in lighting distribution systems or motor distribution systems for overload and short circuit protection 2) Novel structure, light weight, reliable and excellent performance 3) High breaking capacity 4) Can trip quickly 5) With installation guide 6) Highly fire resistant and shockproof plastics 7) With long usage life 8) Mainly used in AC 50Hz / 60Hz 240V single-pole or two, three, four-pole 415V circuit for overload and short-circuit protection in addition to infrequent on-and-off switching electric equipment and lighting circuit in normal cases 9) Comply with the IEC 898 and BS 3871 standards

Features: 1) The key part of the heat pump air conditioner 2) Diverts the direction of the refrigerant flow under the electromagnetism of the pilot valve, to supply either heating in winter or cooling in summer to the conditioned place 3) Twice-opening 4) The diversion is controlled by the pilot valve, ensuring the high reliability of operation

We provide all kinds of fan,fan blade, fan slinger, bower wheel,according to customers' drawings / spec.

We can provide all kinds of compressors according to customers' drawings or specifications.

Features: 1) The key part of the heat pump air conditioner 2) Diverts the direction of the refrigerant flow under the electromagnetism of the pilot valve, to supply either heating in winter or cooling in summer to the conditioned place 3) Twice-opening 4) The diversion is controlled by the pilot valve, ensuring the high reliability of operation