Electronic Component

Cable lugs copper/aluminum tubular terminals, splices and disconnects accommodatingwire ranges from 1.5s to 1000mm2.99.9% pure copper tubularL2 aluminum and electrolytic tin plating processOther coating available upon request Serires:1. SC(JGK) series2. GTY-1, GTY-2 series3. DTL-1 , DTL-2 series4. T/J series5. GT-1, GL-1 series

Quick hydraulic plieres : YQK-70Wire crimp conn eltion pliers : YYQ-120

Parallel groove clamps and connectors for overhead power line1.CAPG series Aluminium to copper parallel groove connectors( export type)Main conductor aluminium ,aluminium alloy cond,tap conductor copperClamp body is made of high corrosion resistant aluminium alloy.Tap contact is made in copper.Interface between aluminium clamp body and tap copper shape is protected.All of the clamp's bolts are hot-dip galvanized steel.Model number:Cu6-50/Al16-70 (1 bolt or 2 bolts)Cu10-95/Al25-150 (1 bolt or 2 bolts)Cu16-185/Al35-200 (2 bolts)Cu35-185/Al35-185( 3 bolts)Cu50-240/Al50-300( 2 bolts)Cu35-240/Al35-300 (3 bolts)2.APG series Aluminium to Aluminium PG connectors.(export type)Main and tap conductor aluminium,aluminium alloy cond.Clamp body is made of high corrosion resistant aluminium alloy.The clamp's bolt are hot-dip galvanised steel.Model number:Al 16-70mm2(1 bolt or 2 bolts)Al 16-35mm2( 1 bolt)Al 16-150mm2 (2 bolts)Al 35-300mm2 (2 bolts)3.JBL series Aluminium to Aluminium parallel groove cl

The heat-shrink materials are obtained by cross-linking of polyethylene with chemicalor radiation method. The shape of a product is formed at high temperatures and then solidified by cooling it to a room temperature. The product highly increases its cross dimensions during this process. By heating the product to temperature 120/200 during assembling we cause its form to be melted and, owing its "shape memory", it will attempt to return to its original shape, thus significantly decreasing its cross dimensions and tightly closing the object placed previously into it. This ensures electrical insulation, anticorrosion protection, improves aesthetics. The cross-linked polyethylene is highly resistant to stress corrosion, solvents, acid and base solutions, salts, petrol and oils. Certain products are covered inside with a glue that additionally increases their tightness and pressure resistance. They are used for insulating of terminals, joints, clamps, holders, bus-bars, wire bund

We can supply triode thyristors with rated on-static average current from 5A to 5000A and rated off-state respective pack reverse voltage from 100V to 4500V.The triode include stud-model and disc construction and two forms of coiling (forced air and water)have been used.Triode thyristors are mainly used for DC motor drivers, electrolysis, electroplating, battery changing and quick charging, synchronous motor field excitation current-stabilization supply with high accuracy, induction heating and so on.Our products accord with National standard GB4940-85, JB5839-91, JB5853-91 and international electrometrical commission (IEC) standard.TO-208AA(TO-48),:T10F(R), T16F(R),T20F(R),T22F(R)TO-208AC(TO-65):T30F(R), T35F(R). T50F(R)

We can supply rectifier diodes, with rated mean forward current from 5A to 5000A and repetitive voltage from 100V to 4500V, There are two constructions stun model and disc model and there two forms of cooling orphic freed air cooling and water cooling rectifier diodes are mainly used in rectifying electric circuit in electrochemistry, electrolysis electroplating traction power supply for switch gear operation etc. The products accord with national standard GB4939, JB5837 JB5841-91 and International electro technical commission standard (IEC).D0-203AA(D0-4): D6F(R), D12F(R),D15F(R),D25F(R)D0-203AB(DO-5):D40F(R),D50F(R),D70F(R),D85F(R)

Technical description: layer: 6 material FR4 Board thickness: 2.0mm Cooper thickness: 1/1 Oz Surface finished: HAL LF Min through hole: 0.2mm Min line width: 0.1mm Min line space: 0.15mm Special requirements controlled impedance Skype: sayfupcb Mail: andy.liu(at)sayfupcb.com URL: www.sayfupcb.com

Technical requirements: Material: FR-4 Layer: 4 layer Thickness of cooper: 3/2/2/3 Oz Thickness of board: 1.6MM Surface finish: Immersion gold Min. hole size: 0.2mm Min.line width: 0.15mm Min.line space: 0.15mm Contact way: Skype: sayfupcb Mail: andy.liu@sayfupcb.com URL: www.sayfupcb.com

Technical requirements: Material: FR-4 Layer: 2 layer Thickness of cooper: 2/2 Oz Thickness of board: 1.6MM Surface finish: HASL LF + Gold finger Min. hole size: 0.2mm Min.line width: 0.1mm Min.line space: 0.15mm Contact way: Skype: sayfupcb Mail: andy.liu@sayfupcb.com www.sayfupcb.com

Base material: Ceramics, Aluminum, Rogers, high Tg, F4B, F4BK, F4BT, TP, PF, FR4, FR1, FR2, CEM-1, CEM-3, etc. Board thickness: 0.30 to 3.20mm (12 to 26mil) Copper thickness: 0.50 to 5 ounce Solder mask: LPI solder mask, conventional solder mask, peelable solder mask, UV solder mask Minimum line width: 0.1mm (4mil) Minimum line space: 0.1mm (4mil) Minimum hole diameter: 0.25mm (10mil) PTH hole diameter tolerance: +/-0.076mm (+/-3mil) NPTH hole diameter tolerance: +/-0.03mm (+/-1.2mil) Maximum board size: 460 x 620mm (18 x 24) Board finishing type: Hot air leveling, soft gold, hard gold, immersion gold, gold fingers

Base material: Ceramics, Aluminum, Rogers, high Tg, F4B, F4BK, F4BT, TP, PF, FR4, FR1, FR2, CEM-1, CEM-3, etc. Board thickness: 0.30 to 3.20mm (12 to 26mil) Copper thickness: 0.50 to 5 ounce Solder mask: LPI solder mask, conventional solder mask, peelable solder mask, UV solder mask Minimum line width: 0.1mm (4mil) Minimum line space: 0.1mm (4mil) Minimum hole diameter: 0.25mm (10mil) PTH hole diameter tolerance: +/-0.076mm (+/-3mil) NPTH hole diameter tolerance: +/-0.03mm (+/-1.2mil) Maximum board size: 460 x 620mm (18 x 24) Board finishing type: Hot air leveling, soft gold, hard gold, immersion gold, gold fingers

Name: A01-36R Spec: 39*29*16cm Weight(Kg): 0 Groups: 36 Remark: The products use 4 pieces dry battery to supply power, junction box put beside the fireworks products, each junction box ignite 1 piece igniters. >>Product Readme usage elucidation: 1. This product have a 36 button remote controller, the receiver box and the controller is corresponding, the control range is 150-200 meter. 2.Put 4 AA battery in the battery box, and turn on the switch, red and yellow indicator shows bright; press controller button, the red indicator extinguish, the yellow indicator show more bright, it means system run well. 3. Connect the products with firing system, when connected, the yellow indicator would extinguish, the red indicator shows more bright, it means system run well. 4. Press corresponding button of control to ignite products after connect circuitry.

Part number: HIR344P-A45N2Size: 3mmLens Color: PurpleWarelength: 850 nmRadiant lntensity: 5.02 to 6.22 mW/srForward voltage: 1.37 to 1.45VVf If: 20mAView angle: 45 degree

1) Part No .: XQ-MR162) Diameter: 50mm3) Colors: red, yellow, green, blue, white4) Quantity /1 light cup: 12pcs LED/15pcs LED/18pcs LED/20pcs LED and so on5) Watt: 0.7W-1.5W6) Voltage: DC 24V, AC 11V, AC 220V7) Characteristic: low power, long life, can reach 50.000hours, release low heat8) Adopt PC materials, heat-resistant, high temperature-resistant9) Vltraviolet radiation proof, high weigh-resistant, they are popular used in clublightings, ornaments

1) High brightess white Led with various color, type and degree2) We will try ous best to meet your demand 3) high quality and best service

Base material: Ceramics, Aluminum, Rogers, high Tg, F4B, F4BK, F4BT, TP, PF, FR4, FR1, FR2, CEM-1, CEM-3, etc. Board thickness: 0.30 to 3.20mm (12 to 26mil) Copper thickness: 0.50 to 5 ounce Solder mask: LPI solder mask, conventional solder mask, peelable solder mask, UV solder mask Minimum line width: 0.1mm (4mil) Minimum line space: 0.1mm (4mil) Minimum hole diameter: 0.25mm (10mil) PTH hole diameter tolerance: +/-0.076mm (+/-3mil) NPTH hole diameter tolerance: +/-0.03mm (+/-1.2mil) Maximum board size: 460 x 620mm (18 x 24) Board finishing type: Hot air leveling, soft gold, hard gold, immersion gold, gold fingers

Compressor specification:Power Supply :110v~240v ,60hz~50hzPower : 1.5KWMotor Speed:1400r/minOperating Temperature: 5~40 Discharge:300L/minMax Pressure:0.8MPaNoise:  ≤60dBDimension: 610*320*780mm

Power Supply :110v~240v ,60hz~50hzPower : 3KWMotor Speed:1400r/minOperating Temperature: 5~40CDischarge:460L/minMax Pressure:0.8MPaNoise:  ≤64dBVolume: 120LDimensions: 1100*360*800mm

Laser Type:GaAiAs diode laserWalvelength:980nmOutput:15WTreatment Mode:PulseFrequency: up to 10,000HzPulse duration:10us to100msTransimmision System:400umElectronic Control:MicroprecessorControl Panel:Color touch panel

For more spare parts ,pls contact us