Electronic Instrument

Outdoor full color LED display /Video board P10 outdoor full color LED display Pixel Pitch:10 mm Module Size: 160mm×160mm Cabinet Size: 640mm * 640mm Pixel Density:10000 Color Configuration:1R1G1B Cabinet Weight: 50kg Best Viewing Distance: 10—70m Viewing Angle: horizontal: 120°-150°Vertical :30°-50° Average.Consumption: 300~600W/? Max. Consumption: =1000W/? Drive Mode: 1/4 scan Control Mode: Synchronism Graphic Card: DVI Card Frame Rate:=60HZ Refresh Rate:=180HZ White Balance Brightness:=5500cd/? Working Voltage(AC):110—230V Computer System:WIN98?WIN2000?WINXP,etc Input Signals:RF?S-Video?RGB?RGBHV?YUV?YC?COMPOSITION Control System:PCTV+DVI (graphic card) + main control card + optical fiber transfer Life Span:50000~100000hours Malfunction Dot Rate:<0.0002 Software:LED Studio

1.Model: CD-1600G 2. Hearth Size: F60x1000mm 3. Common temperature: 1500? 4.Rating temperature: 1600? 5. Rating power: 15KW 6. Working power: AC220V(double phase) 7. Temperature control: Intelligence PLC 8. Heating rate: 0-10?/MIN 9. Heating element:MoSi2 heating element

1. Model: CWNMG-9901 2. Total system power: 4KW 3. Working power: AC380V(Three phase) 4. Displacement compressor: 0.36M3 5. Chambers capacity: 0.12M3 6. Abrasive Test: Domestic36#SIC heating element 7. Air pressure precision instructions: 0.4% 8. Air pressure: 448KPa

Main Specifications Inside chamber Size 160 x 150 x 150mm Standard Working Temperature 1600? ( continuous ) Maximum Working Temperature 1700? ( < 3 hrs) Temperature Control 30 steps programmable and auto control Heating rate 0~20? / min Temperature accuracy ± 0.5? Heating Element MoSi2 heating elements F6 120 x 170 x30 mm

Analog multimeter 1) Excellent DC resolution factor of 2mV and expanded resistance measurement from 0.2Ω to 20MΩ 2) Series capacitor terminal (OUTPUT) blocks DC to enable measurement of only AC components 3) Continuity checking with LED or Buzzer 4) A large and bright meter with a scale length of 800mm and its sensitivity of 44μ A at full scale 5) Fuse and diode protection 6) Measures hFE to 1000 using optional TR connector 7) DCV=100m/500m/2.5/10/50/250/1000V(20kΩ/V)±3%f.s. 8) ACD=10/50/250/1000V(9kΩ/V)±4%f.s. 9) DCA=50μ/2.5m/25m/250mA±3%f.s. 10) Ω=2k/20k/200k/2M/20MΩ MAX±3%f.s. 11) dB=-10～62dB 12) LI=150μ/1.5m/15m/150mA 13) hFE=0～1000(w/TR connector) 14) Power source: R6 (1.5V) x 1,6F22(9V) x 1 15) Size: 150 x 100 x 36mm 16) Weight: 280g Packed in gift box, 40pcs/ctn Dimensions: 52 x 32 x 23cm N.W.: 13kg G.W.: 14.5kg

The automatic oil tester (oil purifier oil purification oil recycling oil filtration) model IIJ-II adopt industrial SCM to control, which is applied to integrate circuit, new model I / 0 connection, particular testing and anti-jamming technology which largely improve the machine's capacity. Features: 1. simple operation, automatically (can be finished just press on key) 2. menu controlled. Input data can clear 3. can store 99 groups oil testing data which is convenient to reading and print. The testing data can keep 100 years under the condition of power off. 4. system time can go on running under power off; ( the system time just for reference can not be the standard of timing) 5. can upgrade software through RS232 6. high capacity of anti-jamming and high precision of testing. 7. small volume, light which operated in the open air very conveniently.

Single Instrument-many uses, Electrical / Instrument Engineer's dream tool. Measures: DCV: 4V, 40V, 400V ACV: (40Hz~500Hz) 400mV, 4V, 40V, 400V DC mV: 40mV, 400mV Resistance: (Ohms) 400, 4k, 40k, 400k, 4M, 40M DCA: 40mA, 400mA ACA (40Hz~500Hz) : 40mA, 400mA Frequency: (Hz) 50, 500, 5k, 50k, 100k Duty cycle: 0. 1% ~ 99% Diode test: 1 V Continuity: < 50 Ohm BB Thermocouple: type: R-40*C ~1760*C S-20*C ~1760*C K-200*C~ 950*C E-200*C~ 500*C J-200*C~ 700*C T-200*C~ 400*C N-200*C~ 1000*C B 400*C ~ 1800*C RTD: Pt100-200*C ~ 700*C Cu50-50*C ~ 150*C Source: (OUTPUT) Ohm (only 79) 400 Ohm 78 DCmV 500mV 79 DCmV 100mV DCV 5V Frequency (Hz) 100, 1k, 10k Analog transducer-20mA DCmA 20mA Thermocouple type: R-40*C ~1760*C S-20*C ~1760*C K-200*C~ 1370*C E-200*C~ 1000*C J-200*C~ 1200*C T-200*C~ 400*C N-200*C~ 1300*C B 400*C ~ 1800*C RTD Pt100-200*C ~ 850*C Cu50-50*C ~ 150*C Accuracy: 0. 2% + 4 Contact us for details.

Iij series fully automatic oil tester is designed as per the requirement of iec165 testing method of insulation oil medium strength, which via proper programming, has got functions of auto boosting, step down, stirring, display and print out. After breakdown of oil medium, hv break off will operate within 10 seconds to enable an auto isolation of control system partly; this effectively safeguards the personnel security and equipment safety . Features: 1) fully automatic, control by microcomputer, utilization of new I/ O terminal. 2) numbers of times of testing and idling time of stirring are set via digital setting. 3) test results displayed and printed out automatically. 4) strong capability of anti-interference. 5) high accuracy of testing. 6) easy to operate, small size, light weight and convenient for maintenance Technology and parameter data: 1. Power supply: AC-220v 10% , 50 HZ 2. Output voltage: 60kv, 80kv, 100kv (100KV should be specially designed) 3. Capacity: 1. 6kva,

Iij-II fully automatic tester is designed by iec156 dielectric strength of insulating oil. Adopt industrial scm to control, which is applied to integrate circuit, new model I / 0 connection, particular testing and anti-jamming technology which largely improve the machine's capacity. Main features: 1. Simple operation, automatically (can be finished just press on key) 2. Menu controlled. Input data is clear 3. Can store 99 groups of oil testing data which is convenient to reading and print. The testing data can keep 100 years under the condition of power off. 4. System time can go on running under power off; ( the system time just for reference can not be the standard of timing) 5. Can upgrade software through rs232 6. High capacity of anti-jamming and high precision of testing. 7. Small volume, light which operated in the open air very conveniently.

The automatic oil tester model IIJ-II (oil purifier, oil purification, oil filtration, oil recycling) adopt industrial SCM to control, which is applied to integrate circuit, new model I / 0 connection, particular testing and anti-jamming technology which largely improve the machine's capacity. Features: 1. simple operation, automatically (can be finished just press on key) 2. menu controlled. Input data can clear 3. can store 99 groups oil testing data which is convenient to reading and print. The testing data can keep 100 years under the condition of power off. 4. system time can go on running under power off; ( the system time just for reference can not be the standard of timing) 5. can upgrade software through RS232 6. high capacity of anti-jamming and high precision of testing. 7. small volume, light which operated in the open air very conveniently. ZYD Series: used transformer oil / switch oil / mutual inductance oil / insulation oil purifier TY Series: turbine oil

Iij series fully automatic oil tester is designed as per the requirement of iec165 testing method of insulation oil medium strength, which via proper programming, has got functions of auto boosting, step down, stirring, display and print out. After breakdown of oil medium, hv break off will operate within 10 seconds to enable an auto isolation of control system partly; this effectively safeguards the personnel security and equipment safety. Features: 1) fully automatic, control by microcomputer, utilization of new I/ O terminal. 2) numbers of times of testing and idling time of stirring are set via digital setting. 3) test results displayed and printed out automatically. 4) strong capability of anti-interference. 5) high accuracy of testing. 6) easy to operate, small size, light weight and convenient for maintenance Technology and parameter data: 1. Power supply: AC-220v 10% , 50 HZ 2. Output voltage: 60kv, 80kv, 100kv (100KV should be specially designed) 3. Capacity: 1. 6kva,

The automatic oil tester (oil purifier, oil purification, oil recycling, oil filtration) model IIJ-II adopt industrial SCM to control, which is applied to integrate circuit, new model I / 0 connection, particular testing and anti-jamming technology which largely improve the machine's capacity. Features: 1. Simple operation, automatically (can be finished just press on key) 2. Menu controlled. Input data can clear 3. Can store 99 groups oil testing data which is convenient to reading and print. The testing data can keep 100 years under the condition of power off. 4. System time can go on running under power off; ( the system time just for reference can not be the standard of timing) 5. Can upgrade software through RS232 6. High capacity of anti-jamming and high precision of testing. 7. Small volume, light which operated in the open air very conveniently. ZYD Series: used transformer oil / switch oil / mutual inductance oil / insulation oil purifier TY Series: turbine oil / diese

Iij series fully automatic oil tester is designed as per the requirement of iec165 testing method of insulation oil medium strength, which via proper programming, has got functions of auto boosting, step down, stirring, display and print out. After breakdown of oil medium, hv break off will operate within 10 seconds to enable an auto isolation of control system partly; this effectively safeguards the personnel security and equipment safety. Features: 1) fully automatic, control by microcomputer, utilization of new I/ O terminal. 2) numbers of times of testing and idling time of stirring are set via digital setting. 3) test results displayed and printed out automatically. 4) strong capability of anti-interference. 5) high accuracy of testing. 6) easy to operate, small size, light weight and convenient for maintenance Technology and parameter data: 1. Power supply: AC-220v 10% , 50 HZ 2. Output voltage: 60kv, 80kv, 100kv (100KV should be specially designed) 3. Capacity: 1. 6kva,

Our products are of high quality and low price. If you are interested in them pls contact me for more informations

Description Bandwidth 25MHz 40MHz 60MHz 100MHz Rise Time >=14ns >=8.7ns >=5.8ns >=3.5ns Sample Range 500MS/s ~ 1GS/s (UQ2025 series is 250MS/s) Vertical Sensitivity 2mV ~ 5V/div Record Length (Max) 1M Sample Rate Real time 500MS/s ~ 1GS/s, Equivalent: 25GS/s

Here's the official new model popular iphone specifications you have been waiting for years! Kevin Rose was not to far away on many specifications besides the dual battery system and the sliding keyboard. Screen size: 3.5 inches Version:1.1.0 1.0.1 1.1.1 1.1.2 .1.1.3 1.1.4 Screen resolution: 320 by 480 at 160 ppi Input method: Multi-touch (touchscreen) and side buttons for volume control Operating system: Stripped down version of OS X Web browser: Safari Application and Widgets: Google Maps, Stock quotes and Weather information Storage: 4GB and 8GB Phone technology: Quad-band GSM(MHz: 850, 900, 1800, 1900) and EDGE (This means the phone is not a 3G phone but a 2.5G) Wireless data: Wi-Fi 802.11b/g Bluetooth 2.0 Camera: 2.0 megapixels Battery: Up to 5 hours Talk / Video / Browsing, Up to 16 hours Audio playback Dimensions: 4.5 x 2.4 x 0.46 inches

SOKLIN WAHSING POWDER , ACTIVE 21-10% , 340G,1KG

Model: CM8821 Operating principle: magnetic induction (F) Measuring range:0-1000um Resolution; 0.1/1 Accuracy: ±1-3%n or ±2.5um Min. measuring area: 6mm Min. sample thickness: 0.3mm Battery indicator: low battery indicator Metric/ imperial: convertible Power supply: 4x1.5V AA (UM-3) battery Auto power off Operating conditions:0-+45?(32?-104?),=90%RH Dimensions: 160x68x32mm weight: 250g(not including battery) Optional accessories: other range 0-200um to 15000um

Application:used for measuring thickness and corrosion of pressure vessels,chemical equipment,boilers,oil storage tanks,etc.in industries of petroleum,shipbuilding,power station,and machine manufacturing. Model: CM8829S With separate probe(s) Operating principle: magnetic induction/eddy current (F/NF) Measuring range:0-1250um/0-50mil Resolution: 0.1/1 Accuracy: ±1-3%n or ±2.5um Min. measuring area:6mm Min. sample thickness:0.3mm Battery indicator: low battery indicator Metric/ imperial: convertible Power supply: 4x1.5V AAA(UM-4)battery Auto power off Operating conditions:0-+45?(32?-104?),=90%RH Dimensions: 126x65x27mm weight: 81g(not including battery) Optional accessories: other range 0-200um to 15000um

Model: CM8825FN In built probe(s) Operating principle: magnetic induction/eddy current (F/NF) Measuring range:0-1250um/0-50mil Resolution; 0.1/1 Accuracy: ±1-3%n or ±2.5um Min. measuring area: 6mm Min. sample thickness: 0.3mm Battery indicator: low battery indicator Metric/ imperial: convertible Power supply: 4x1.5V AAA(UM-4)battery Auto power off Operating conditions:0-+45?(32?-104?),=90%RH Dimensions: 126x65x27mm weight: 81g(not including battery) Optional accessories: other range 0-200um to 15000um