Electronic Instrument

?Based on Proprietary Infrared(NDIR) gas sensor and TCD sensor with MEMS technology. ?Measure gas concentration of CO,CO2,CH4,H2,O2 from blast furnace,converter, heat treatment furnace, coal gasification process etc. ? LCD(240×128)display. ?Sampling pump inside optional ?RS-232 interface ?Supply data sample control Software for Demo. Specification: ?Measurement range :CO:0-100% C02:0-50% CH4:0-10% H2:0-50% O2:0-25% ?Precision:CO/CO2/CH4/:±2%, O2/H2:±3%(FS) ?Resolution:0.01% ?Response time:Less than 20s ?Warm up:10min ?Output: 4-20mA or RS232 ?Power:AC220V ?Weight:9Kg ?Dimension:rack type 19 inch 3U (Gasboard-3100 series can be customized according to end user)

Based on Micro-Flow NDIR technology. Measure SO2,NO,CO,CO2,O2,T,P,Flow simultaneously. No effect of H2O on the measure result of SO2 and NO. No constant flow requirement for SO2/NO/CO/CO2. Built-in pump Calculation of Lambda and combustion efficiency automatically. LCD 320 x 240 display,RS232 digital output Specification Gas Parameter Measurement Principle: Micro-Flow NDIR : SO2,NO,CO,CO2 Electrochemistry: O2 Measurement Range : SO2:0-2000PPM NO: 0-2000PPM CO: 0-5000PPM CO2:0-25% O2: 0-25% Resolution: SO2/NO/CO: 1PPM CO2/O2: 0.01% Precision: SO2,NO,CO,CO2 : 1%FS O2: 2%FS Temperature Parameter Measurement Principle: Ambient Temperature:Thermistor Flue Gas Temperature: Thermocouple Range: Ambient Temperature :-10-100? Flue Gas Temperature : -10-600? Resolution: Ambient Temperature 1? Flue Gas Temperature 1? Precision: Ambient Temperature ±1?

?With Proprietary Infrared(NDIR) gas sensor and electrochemical gas sensor. ? Measurementof SO2,NO,CO,O2 for flue gas during combustion process. ? LCD(240x128)display. ?Sample pump inside optional ?RS-232 interface ?Supply data sample control Software for Demo.

We would like to draw your attention on our company, BROIL SENSOTEK INDUSTRIES, Producer of special application fine RTD and THERMOCOUPLE. and all india Distributor of SENSOR-TECH( Europe)/ Auto Tran( USA) . PRESSURE TRANSMITTER Indicator Specifications :: Input : 1) Current, 4 - 20 mA DC/ 0 - 20 mA DC , 2) Voltage, 1 - 5 V DC/ 0 - 10 V DC 3) RTD Pt 100 , 4) T/C Type J, K, R, S, T. Input impedance 200 K for Voltage, mV & T/C inputs , 250 for current inputs Alarms : Maximum 4 nos. of potential free contacts. Analog output : 1) Isolated 4 - 20 mA DC, 2) Non isolated 4 - 20 mA DC Analog output load capability : 800 maximum Output accuracy : +/- 0.25% of span Serial output with open protocol 1) RS232 With modbus RTU or ASCII protocol 2) RS485 with modbus RTU or ASCII protocol Note: Any other protocol on demand Parallel output port 1) Compatible with Escape command format Note: Any other protocol on demand Display accuracy : +/- 0.1% of s

·Slim and stylish design ·Fully conform European DVB-T(C-OFDM) industrial standard ·Teletext output,compliant with ETS/EN300472 ·Automatic,Manual or Easy installation of DVB-T program ·Convenient user interface,support multi-language ·EPG function ·Support PAL/NTSC/SECAM ·Powerful program edit function ·PIG support ·Ultra-low signal threshold demodulator ·Program database copy ·Local firmware upgrade via PC INPUT/OUTPUT SOCKET: ·One Scart Output ·RF Input & Output ·Rs232

SYSTEM INFORMATION: ·Power source input:AC80-250V 50/60Hz(DVD) ·AC110-250V 50/60Hz(WOOFER) ·Power consumption:60W(WOOFER),160W(DVD) ·5x20W(Satellite Speaker*5) FEATURES/FUNCTIONS: ·Convenient user interface,support multi-language; ·Support PAL/NTSC/AUTO; ·Powerful program edit function ·5.1 Surround Analog Audio Output; ·Coaxial/Optical Digital Audio Output; ·Component Video Output ·Composite Video Output ·Dual Scart Output ·S-VIDEO Output ·AM/FM Radiogram Systemic; ·16:9 & 4:3 PS and Multi subtitle and Multi-language OSD. ·ACCESSORIES REQUIRED(OPTION): ·SCART cable(1PCS)

·Progressive Scan With Normal DVD Function ·Convenient user interface,support multi-language; ·Support PAL/NTSC/AUTO; ·Super Karaoke function; ·Super Karaoke function; ·Powerful program edit function ·VGA output ·5.1 Surround Analog Audio Output; ·Coaxial/Optical Digital Audio Output; ·Component Video Output ·Composite Video Output ·Dual Scart Output ·S-VIDEO Output ·USB ·Compatible with MPEG4,DIVX,DVD,DVD±R/RW,VCD,MP3,CD-DA,HDCD,Picture CD,CD- R,WMA,JPEG;

? Proprietary Infrared(NDIR) gas sensor. ? Measure gas concentration of CO,HC,CO2,O2,NO simultaneously. ? LCD display. ? Air/fuel ratio calculation and display automatically. ? Chinese/English display screen,easy operation. ? Oil temperature and RPM interface. ? RS-232 interface and optional software. ? Built-in Printer.

Household Energy Saver A. Product Principle Household appliance always appears switch frequency, high-low frequency voltage at day and night, current block in long-used time and heating of appliance. In view of this situation, we design the new type of product. Compose of high-frequency and low-frequency network filtering in line network respectively, through overall portfolio, have improved significantly on the energy ,input power, input current, energy efficiency, power factor and other performance indicators of air conditioner, refrigerator ;control the inrush current and pulse voltage and high-low-frequency harmonic because of starting household appliances frequently; So that stable the high and low voltage and the current in different size relatively ,to achieve the purpose of energy saving, environmental protection, and protecting appliance. B. Features a) The suitable power is large. b) It is more fashionable, attractive and practical. c) It is not only energy-saving and

Outside IR Integrated Constant-Speed Pan-Tilt Camera ,Left/Right rotation range:3600 Continuous Rotation, Left/Right Speed:0.50~800/s,Up/Down Rotation Range:+800~--800/s,Up/Down Speed:0.50~800/s, Communication:RS485,Present position:128,ABW:On/Off,Track:4 patrol track, Power supply:AC24V/AC220V˜55W, System temperature: --450C~+500C,Built-in heaters?defrost?and wiper devices. 1/4"IT EXVIEW HAD CCD,f=3.9-85.8mm22X(Focus length), 16X (Electrical focus), Dual-filter,480TVL. IR Distance:100~120M(f10*70) 130~150M(f25*24) 150~200m (f10*56 /f25*14) Auto focus,Waterproof level IP 66.

The production of WET6-OCT series of Optical Electronic Transformer is a combination of modern sensor technology, electronics and optical communications technology to a new type of transformer current detection, it uses Rogowski coil current, after the signal treated by the Optical Fiber it will transmission to the low-voltage side of the secondary equipment. This series of products with 110kV?220kV?330kV?500kV?750kV, and other voltage levels. It has two-way installation includes pillar and suspended. Apply to the traditional electromagnetic transformer all applications, particularly applicable to high accuracy, linearity, and good transient performance and high-pressure occasions, UHP occasions. This series of products are under the IEC60044-8: 2002, IDT standards.

The product is supported to the DL/T645-1997 «multi-functional electric energy meter»standards. The product has lent stability, the design of digital signal operations, digital filtering, digital error correction, digital tuning, and temperature compensation technology to meet the needs of high multiples, the low power consumption load records. This product has precision measurement of voltage; current, power factor, power and other data, and it can measurement of two-way, reactive power rates four images, RS 485 interface, and infrared communication protocol can meet the requirement of the DL/T 645-1997 statute.

EMC is a science subject which studies how electric appliance or system can work together without causing performance declass within limited space, limited time, limited frequency spectrum resource. To speak simply, electronic-magnetic interference emission from qualified electric appliance or system should be in accordance with standard (less than a value), meanwhile the capability to resist electronic-magnetic interference should also accord to standard (higher than a value). Electronic-magnetic interference emission is by 2 ways: space emission; power cord emission in electricity network which pollutes the power network. More and more attention has been drawn to the Electromagnetic compatibility problem of electrical and electronic products, especially in those countries in Europe and America, the testing is enforced. Now the successful development of EMC300A Electromagnetic compatibility & conducted Interference Testing system make your job easy. Characteristics And Specifi

The HP200Z is virtually ideal for all types of measurement and features high sensitivity, autoranging, auto zeroing, highly accurate readout and range-to-range linearity. Characteristics And Specifications: 1) Auto range switch 2) Function: luminous flux, luminance, illuminance. 3) Fine V(?) and cosf corrected detector, class 1 according to GB/T7403 standard 4) Low zero drift, high accuracy 5) 5 Digit display 6) Accuracy of luminous intensity: Class 1 7) RS-232-C interface HP200Z-Measurement Accessories Integrating Spheres 1) Internal diameters: 0.5m/1.0m/1.5m/2.0m 2) Work with all instrument systems spectrometers Photodetector 1) Fine V(?)-approximation and cosine corrected. 2) Accuracy: ClassA

It can measure the electrical characteristics quickly including electrical characteristics and luminous flux of LED Cluster Light and High Power LED, it can setting low limit and high limit setting and sound light alarm automatically. Characteristics And Specifications: 1)Forward current (IF): 0.1mA -- 1000.0mA (Precision Constant Current) 2)Forward voltage (VF): 0.01V -- 20.0V 3)Reversed current (IR): 0.01µA -- 200µA 4)Reversed voltage (VR): 0.01V -- 20.0V 5)Warm-up time: 0 -- 9999ms 7)Range for luminous flux: 10.0mlm -- 2000.0lm 8)Accuracy of luminous flux: Class 1 9)Alarm when exceeds high and low limit of forward voltage and reversed current HP820-Measurement Accessories Photodetector 1)High Accuracy: Class A 2)Fine V(?)-approximation and cosine corrected. LED Test Sockets 1)Test sockets for High Power LED, High Flux LED and General LED 2)Optimized for all Instrument Systems LED measuring adapters. 3)Simple handling, reliable electrical con

It is designed for measure the luminous intensity distribution curve, spread angle of light beam and electrical characteristics of High Flux LED and General LED . Constant current power supply inside, Meets the condition A or B in CIE pub.No.127. Characteristics And Specifications: 1)Forward voltage (VF): 0.001V -- 20.00V 2)Forward current (IF): 2.00mA -- 1000.00mA (Programmable Precision Constant Current) 3)Reversed current (IR): 0.01µA -- 200.0µA 4)Reversed voltage (VR): 0.01V -- 200.0V 5)Spread angle of light beam: ?(50%) ?(25%) ?(75%) 6)Center intensity: I0 7)Peak intensity: Imax 8)Misalignment angle: ?? 9)Intensity range: 0.001mcd -- 300.000cd 10)Accuracy of intensity: 1 class 11)Angel range: -90°-- +90° 12)Accuracy of angel: ±0.2° 13)Angel interval: 0.1°/0.5°/1°/1.5° 14)Draw luminous intensity distribution curve and measure the spread angle for light beam(Automatically). 15)Windows® XP Pro and Windows 2000

This DC power supply is specially designed for the standard light source with high stability, high accuracy ,voltage and current adjustable and simple operation. It is suitable to supply for the standard light source and the high power LED. Note: Tungsten lamp standards must be operated at their specified calibration current in order to realize the accuracy of the standard. A small error in setting the lamp current can induce a sizable, wavelength dependent error in the spectral output of the lamp. Characteristics And Specifications: 1) Voltage output range: DC 6V/12V/24V/50V(Auto range switch) 2) Current output range: DC 0.1mA - 2.500A 3) Current drift at full range: ±0.05% reading/8 minutes 4) Accuracy of A: ±(0.08% reading ±0.02% range)

The system can measure photometric parameters of LED-lamp and lamps, such as spatial intensity distribution, intensity distribution curve on each section (represent by right-angled coordinates or polar coordinates), luminous intensity, center intensity, maximum intensity & maximum intensity angle, effective intensity & effective intensity angle, and electric parameters (voltage, current, wattage, power factor) and etc. The HP880 Windows® based application software provides complete control of the HP880 goniometer with a comprehensive suite of spatial radiation measurement routines. Characteristics and specifications: 1)Meet the requirements of GB & CIE 2)Tested luminaires installation with cross laser aiming 3)Intelligent photodetector with fine V(?) correction 4)Photometric accuracy: first-grade standard 5)Angle accuracy: ±0.2° 6)Testing optical distance: 0.5m, 1m, 1.6m 7)Range of Effective intensity: 0.1lx - 30,000lx 8)Spread angle of light beam

HP8000 High Speed LED Measurement System is made up of small Monochromator and CCD-array detector. The characteristics are test fast, convenient use, long time service, excellent reliability etc. It's the ideal choose to test LED and all series light material. The HP8000 is a specially packaged version of the KSP2000 and includes accessories specifically for measuring various photometric,radiometric and colormetric properties of LEDs. Typical measurements provided by the HP8000-LED Measurement System are: Total Radiant Flux(Watts) Total Luminous Flux(lumens) Total Spectral Flux (Watts/nm) Total Power (Watts) Dominant Wavelength Spectral Purity Correlated Color Temperature Peak Wavelength Color Rendering Index ChromaticityCoordinates Spatial Radiation Measurements delete Half-Bandwidth Averaged Luminous Intensity (lumens/sr) Averaged Radiant Intesity (Watts/sr) Characteristics And Specifications: 1)Fiber coupling light i

The HP9000-Automated Spectroradiometric Measurement System is a specially packaged version of the KSP2000 and includes accessories specifically for measuring various photometric, radiometric and colormetric properties of LEDs. The HP9000 system is a turnkey system featuring a high-speed multichannel spectroradiometer that provides the fastest, most reliable precision LED test and measurement available today. All hardware and software is provided. It can show the result of photometry and colorimetry on the big color LCD directly, also can connect to PC. Typical measurements provided by the HP9000-LED Measurement System are: Total Radiant Flux(Watts) Total Luminous Flux(lumens) Total Spectral Flux (Watts/nm) Total Power (Watts) Dominant Wavelength Spectral Purity Correlated Color Temperature Peak Wavelength Color Rendering Index ChromaticityCoordinates Spatial Radiation Measurements delete Half-Bandwidth Averaged Luminous In