Motor and Engine

These motors are specially designed for automatic door and rolling door, thus they should not be used continuously for longer than 5 minutes. *Operating Conditions: 1) Ambient temperature: -15 degrees Celsius~40 degrees Celsius 2) Above sea level: not exceed 1000m 3) Rated voltage: +/- 5%

*YJP Series Polishing Machine uses a new type motor which has advantages such as good starting, small volume, light weight, beautiful shape, solid structure and reliable performance, etc., which can drive grinding wheel to polish various kinds of spare parts. *Main Technical Data: 1)Output: 0.75, 1.1, 1.5, 2.2, 3, 4, 5.5, 7.5kw 2)Voltage: 380V 3)Frequency: 50Hz *Operating Conditions: 1)Ambient temperature: -15 degrees Celsius~40 degrees Celsius 2)Above sea level: not exceed 1000m 3)Rated voltage: +/- 5%

*YBP Series motors with converters are new A.C. velocity modulation products.They can be used for stepless velocity modulation in frequency convertible range of 50Hz~100Hz,or even wider range ,below 50Hz with constant torque and over 50Hz with constant output. Separately assembled with axial-flow ventilator,motors can get better cooling at different speed. *The output and mounting dimensions of this motor are in correspondence with those of Y series motors. *Main Technical Data and Operating Conditions: 1)Voltage of network: 380V 2)Frequency modulating range: 5-100Hz 3)Duty: S1 4)Insulation: Class F 5)Protection: IP44, IP54 6)Ambient temperature: <=40 degrees Celsius 7)Above sea level: not exceed 1000m 8)Ambient humidity: <=90%

Features: *High efficient The efficiency indexes of this series motor are averagely 5%-8% higher than that of Y series motor, so this motor can replace the asynchronous motor of 1-2 output larger (or one frame size larger). *Energy-saving Replacing Y series asynchronous motor with XYT series motor will save a lot of money annually in the respects of work electricity, idle work compensation, air conditioner energy consumption and line loss, etc. The comprehensive electricity saving rate is 10%-40%. *Applied scope This series motor is mainly used in such industries as petroleum industry, chemical industry and coal industry, etc. to replace the asynchronous motor which is now used in a complete equipment, also can be used in other industries to replace some Y series motors. *Structural characteristics It adopts advanced excitation method with Permanent magnet Nd.Fe.B. There are many creations in the rotor structure and magnetic line design. This series motor is ventilated

*The speed of YD Series Pole-changing Multi-speed Three Phase Induction Motor can be changed step by step according to the requirements of load characteristics, thereby reaching the aims of economizing on electricity and simplifying the system of speed variation. *This series of motor has great starting torque and low noise and vibration, and its mounting dimensions are complied with the standard of IEC. *It has a fairly good interchangeability as compared with the similar products of the same kind so that it is easy to maintain and used widely in the industrial departments of machine tools, chemical industry , textile, metallurgy and mine, etc. *Features: 1)Voltage: 380V 2)Frequency: 50Hz 3)Ratio of max torque to rated torque: 1.8 4)Protection: IP44 5)Cooling Type: IC0141 6)Insulation: Class B 7)Mode of rating: Continuous running

* YL Series Single-phase Dual-capacitor Induction Motor has nice appearance, good performance and economizing in electricity with high reliability in operation.The designations, symbols, nominal values of the mounting dimensions are all in conformity with IEC standard. It would be easy for consumers to use these single-phase motors instead of three phase ones in the regions where no three phase power source is available. * YC Series Heavy-duty Single-phase Motors concentrate the advantages of high starting torque, smooth running, low temperature rising, low noise and greater overload performance. * YCL Series Heavy-duty Capacitor Start and Run Single-phase Motors are similar to YC Series in many ways, while the temperature rise is lower and the efficiency and power factor are increased. *Features: 1)Rated voltage: 220V 2)Rated frequency: 50Hz 3)Duty: Continuous 4)Protection: IP44, IP54 5)Cooling Type: IC0141 6)Insulation: Class B / F / H 7)The motors of 60Hz or other

*Y2 Series Three Phase Induction Motor, adopting the national unified design, can replace Y series Induction Motor and possess sophisticated features such as new construction, good-looking appearance, low vibration, low noise, economization on power and materials consumption, etc. *Y Series Three Phase Induction Motor is totally enclosed and fan cooling, squirrel cage type and newly desgned in conformity with the relevant rules of IEC and DIN42673 standards.It has outstanding performance, such as high efficiency, energy saving, high starting torque, low noise, little vibration, reliable operation and easy maintenance, etc. It is widely used in many places, where do not exist combustible, explosive or corrosive gas, and without any special requirements, such as machine tools, pumps, fans, transport machinery, mixer, agriculture machinery and food machines, etc. *Features: 1)Protection: IP44, IP54 2)Insulation: Class B / Class F 3)Cooling Type: IC0141 4)220V/380V, 220V/400V, 38

*ML Series Aluminium Housing Single-phase Dual-value Capacitor Asynchronous Motors have good performance, safe and reliable operation, nice appearance, and can be maintained very conveniently, while with low noise, little vibration, light weight and simple construction. *They are suitable for prospering small size machine tools, air compressor, water pumps, refrigeration, medical apparatus and instruments, etc, especially for family workshops where only single-phase current supply is available. *Other Single-phase Aluminium Housing series are MC Series, Capacitor Start Asynchronous Motors especially for machines that need full-load start, and MY Series, Capacitor-run Asynchronous Motors. *Features: 1) Superior finish 2)Externally ventilated 3)Light weight construction 4)Top mounted terminal box 5)Protection: IP55 6)Choice of foot or flange mounting 7)Motor frame size from 56~112 *Operating Conditions: 1)Ambient temperature: -15 degrees Celsius~40 degrees Celsi

*MS Series Three Phase Aluminium Housing Motors are acknowledged as having a name for quality and reliability. She is suitable for driving machines which have no special requirement, such as machine tools, pumps, blowers etc. *Features: 1)Superior finish 2)Externally ventilated 3)Light weight construction 4)Top mounted terminal box 5)2, 4, 6 & 8 pole 6)Protection: IP44, IP54 7)Insulation: Class B / Class F 8)Choice of foot or flange mounting 9)Motor frame size from 56~132 *Operating Conditions: 1)Ambient temperature: -15 degrees Celsius~40 degrees Celsius 2)Above sea level: not exceed 1000m 3)Rated voltage: +/- 5%

Mode YL168F Type Single cyllinder,4-stroke,forced air cooled BorexStroke(mm) 68x45 Displacement(ml) 163 Compression ratio 8:5:1 Rated output(kw)/3600rpm 3.1 Max Torque(N.m/2500rpm) 10.5 Ignition fashion Manual Fuel capacity(L) 3.6 Continue running time(h) 3 Lube capacity(L) 0.6 Fuel consumption(g/kw.h) =315 Oil consumption(g/kw.h) 6.8 Idle speed(rpm) 1350

SPECIFICATION Protocol : DiSEqC 1.2 Compatible Receiver : DiSEqC 1.2 Receiver Antenna Size : 120 cm Max Speed : 1.1°/sec(at 13v);1.7°/sec(at 18v) Azimuth Angle : 40°East~32°West Elevation Angle : 0~90° Input/Output Voltage : 13/18Vdc Power Consumption : 50mA(Standby) 200mA(Normal) 350mA(Max.) Satellite Positions : 60 positions Goto 0 Position Function : Yes( Go to Reference Point) Recalculation Function : Yes Manual Button : Yes Limit Protection : Programmable Software Limit Connector : F-Type Length of Connection : Max.50 menter high quality RG-6U cable Dimension(Mount) : 256*213*124 mm3(Gross) Weight(Mount) : 2.9Kg(Net)/3.1kg(Gross)

SPECIFICATION Protocol : DiSEqC 1.2 Compatible Receiver : DiSEqC 1.2 Receiver Antenna Size : 120 cm Max Speed : 1.1°/sec(at 13v);1.7°/sec(at 18v) Azimuth Angle : 40°East~32°West Elevation Angle : 0~90° Input/Output Voltage : 13/18Vdc Power Consumption : 50mA(Standby) 200mA(Normal) 350mA(Max.) Satellite Positions : 60 positions Goto 0 Position Function : Yes( Go to Reference Point) Recalculation Function : Yes Manual Button : Yes Limit Protection : Programmable Software Limit Connector : F-Type Length of Connection : Max.50 menter high quality RG-6U cable Dimension(Mount) : 256*213*124 mm3(Gross) Weight(Mount) : 2.9Kg(Net)/3.1kg(Gross)

Voltage: 6VDC,12VDC Reduction ratio: 1:51-1:1913 Number of gear trains: 3-5 Gearbox Length(L) mm: 31,35.5,40 No-load speed r/min: 3.1-196 Rated speed r/min : 1.9-156 Rated torque kg.cm: 0.43-5 Max. permissible load in a short time kg.cm: 8-15

Voltage: 12VDC Reduction ratio: 1:13-1:326 Number of gear trains: 2-4 Gearbox Length(L) mm: 45.5,67.5 No-load speed r/min: 3.7-230 Rated speed r/min : 2.7-192 Rated torque kg.cm: 4.1-106 Max. permissible load in a short time kg.cm: 100-600

Voltage: 12VDC,24VDC Reduction ratio: 1:14-1:369 Number of gear trains: 2-4 Gearbox Length(L) mm: 51.5,64,74 No-load speed r/min: 6.0-158 Rated speed r/min : 5.0-115 Rated torque kg.cm: 0.31-5 Max. permissible load in a short time kg.cm: 6.3-100

Voltage: 12VDC,24VDC Reduction ratio: 1:15, 1:19 ,1:24 Number of gear trains: 2 Gearbox Length(L) mm: 42 No-load speed r/min: 105-200 Rated speed r/min : 63-146 Rated torque kg.cm: 6.2-9.9 Max. permissible load in a short time kg.cm: 50

Voltage: 12VDC Reduction ratio: 1:14-1:720 Number of gear trains: 2-4 Gearbox Length(L) mm: 27.5,36.5 No-load speed r/min: 4.1-428 Rated speed r/min : 3.8-342 Rated torque kg.cm: 0.31-5 Max. permissible load in a short time kg.cm: 6-12

Voltage:12V-24V Power: 5W Max torque: 40kg.cm Ratio: 1:1420 Weight: 480g Speed(no load): 1.5-7rpm

Voltage:3V-12V Power: 1W Max torque: 3kg.cm Ratio: 1:8-1:550 Weight: 70g Speed(no load): 4-1000rpm

Voltage:3V-12V Power: 0.5W Max torque: 8kg.cm Ratio: 1:2000 Weight: 85g Speed(no load): 1-5rpm