Relays

Suitable for class 2 appliancesApproved to CEE7/XVIRated Voltage 250VRated Current 2.5 AStd. Colours black, grey and white

MCK-301 is designed to control freezers, refrigerating counters, monoblocs and other refrigerating shop and industrial equipment. MCK-301 allows to monitor freezer and evaporator temperature and also, depending on a specified mode of operation, to monitor the second evaporator temperature or fan air stream temperature. The device permits to start automatic defrost at temperature difference between refrigerating chamber and fan air stream.MCK-301 can perform protective compressor cut-out if PTC- or NTC-type temperature sensor of compressor is connected to MCK-301.MCK-301 provides safety compressor and fan stop under abnormal supply line parameters (it is performed monitoring of RMS phase voltage and line voltage, phase imbalance, correct phase sequence and power contacts state of external magnetic starter before and after compressor cit-int) and also performs a consequent automatic reset when voltage parameters regenerated with time delay set by user.

The rnpp-311 is designed to provide load 380v/50hz de-energization when the duration of unallowable voltage variations in the mains is 0.02 sec and more, when there is the mains voltage peak asymmetry fault (phase imbalance), phase loss and phase reversal.Nominal voltage, v 380Mains frequency, hz 48-52Adjustable trip umax/umin range: - % of nominal voltage 5-25Fixed trip delay for umin, sec 12Peak phase imbalance value, v 60Fixed trip delay for umax, sec 1.5 (0.1 - as option)Fixed trip delay for a phase loss, sec 1.5 (0.1 - as option)Automatic reset delay after voltage values recovery, sec 5 (0,10,60,100,150,200,250 - on order)Starter coil voltage, v a. C. ~110-380Starter coil voltage, v d. C. = 12-36Trip voltage threshold accuracy, v to 3Voltage, ensuring the rnpp-311 safe operation, v 80-500Short-term tolerable max. Voltage, ensuring the rnpp-311 safe operation, v 700Operating temperature, c -25 - + 40Storage temperature, c -45 - + 70Total input current, ma to 30Swi

Opto-Isolated High Current Solid State Relays (SSR) , Solid State Contactors, Brige rectifier modules, thyristor / thyristor modules, thyristor / diode modules, diode / diode modules, IGBT modules. Our products used in industries of electric power, chemical, metallurgy, petroleum, mining, vehicle manufacturing and electronics consumption. The product has gained the national industrial production permit and certified according to ISO9001: 2000. Some products have passed the CE certificate.

Advanced protection relay test set and measurement systemLightweight multi-function equipmentHigh accuracy: Better than 0.1%Up to 9 currents and 7 voltages outputs plus auxiliary DC. Supply transient playback and harmonics generationDrts-6 options:Additional external amplifiers: Ami-150, ami-66, ami-99, amiv-66, amv-66Optional digital input/output expansion: Io6432ApplicationDrts-6 can test 24 different relay types. In addition the drts-6 has been designed to test: Watt-hour meters; transducers; meters.

1.It is suitable for GY6125,CG125 and Electronic coil of CG125.2.Japanese up-to -date manufacturing technique is apoted, with the contacts developed using special material, entirely sealed, waterproof, dustproof, long asting and the life time can be as great as 100,000tiremes.

Features1. Protection of Phase converse & Loss by voltage detection - Detect Phase converse & Loss by voltage detection and operate in advance. Protection should effect with sure. 2. Wide Tube Holes allow to use without external CT upto Max 120A. - can use with All range of MC (Rated Current less than 120A) (line: upto Max38mm2) 3. When Phase Loss, it operate O-TIME and Protection without D-TIME- 2 'CT' Method and separate Phase Loss detection circuit allow to protect Phase Loss for SS2 and DS Type. 4. Solving the wrong operation and inferiority by noise! - Adopting new power circuit solve the wrong operation and inferiority caused by strong ultrasonic noise. 5. Adopting IC circuit- Precision has been improved by Adopting IC circuit instead of 'MCU'6. Improving installation and the convenience of usage. - Direct connection to Magnet allow to install with easy. - the convenience by Auxiliary Teminal. - Special termianl can make it use separately or use with unstandard Magnets. - Electr

Electronic ballast, suitable for Fluorescent tubelights.Single or double size tubelights,40 or 80 watts. Offering 40 % energy savings, Excellent power factor, widely used. Not necessary to change existing fitting.Attractive price.2 years Guarantee

JR2 series from tara is a heavy duty power relay with a contact rating of 30A at 240v AC. It is panel mounting relay and terminals are available in scew/solderable/QC type. JR2 is available in 2c & 2a contact arrangements. Pls. Feel free to contact us for any further information. Looking forward to a fruitful business relationship

Logic Controllers (Millennium II + / III) , Din Rail Mounted Timers With Multi-Function / mono Function (Chronos 2) , Panel Mounted Electronic / Electromechanical Timers, Voltage Relays, Phase Relays, Current Relays, Conductive Liquid Control Relays, Motor Load, Underspeed, thermal Protection Controls Relays, Solid State Relays, Solid State I/ O Modules, CAM Timers Counter, Rate Meters with / without Preselection, Temperature Controller, Machine Safety, Micro PLC's

We large of photo electric sensor and proximity switchour photo electric switch load 500ma and over load reverse polarity protection and very protec of high frequency and cable length 3m.

Din rail relay unitJumper selectableAvailable: 6v, 12v, 24v, 48v AC / DC1c / 2c / 3c / 4c0. 5a to 30a1 channel to 18 channel

66 das series relay are specially designed for cpacitor swithicng applications like power factor correction panels, capacitor discharge weldling featuring high piv 1800v.

Solid state relays manufactured for single phase and three phase application with current range from 16amp to 300amp. Triac/scr based output with zero crossing or random switching.Brand TAR

Three Phase Voltage and Phase monitoring Relay(RNPP-301)This is Microprocessor-based multifuction mains votage monitor Provides full multi fault protection .Able to replace several traditional devicesADVANCE TECHNOLOGY AND COST EFFECTIVE .

LR-D series thermal relay is suitable for using in the circuits rated voltage up to 660V, rated current 93A AC 50/60Hz, for over-current protection of AC motor. The relay has the differentialmechanism and temperature compensation and can plug in CJX2N series AC contactor. Theproduct conforms to IEC60947-4-1 stardand.

LR-D series thermal relay is suitable for using in the circuits rated voltage up to 660V, rated current 93A AC 50/60Hz, for over-current protection of AC motor. The relay has the differentialmechanism and temperature compensation and can plug in CJX2N series AC contactor. Theproduct conforms to IEC60947-4-1 stardand.

LA, LA3 time-delay relay (new) Ui: 690VIth: 5AContactor type: 1NO + 1NCType: LA2 on delay, LA3 off delaySpecification:LA2-DT0 (0.1-3s)LA2-DT2 (0.1-30s)LA2-DT4 (10-180s)LA3-DR0 (0.1-3s)LA3-DR2 (0.1-30s)LA3-DR4 (10-180s)Dimensions: 48 x 45 x 61mmFunction: fixed with LC1, LP1, and CA2Packing: Standard export packing

JRS2 thermal relay is suitable for AC 50/60Hz, voltage up to 690-1000V and current up to 630A, general AC motor of long or discontinuous long operation, used as overload protection and has the functions of breaking phase protection, temperature compensation, and trip indication. It can automatically and manually get back. It can be fixed with contactor together, also be independently fixed. The product conforms to GB14048.4 and IEC60947-4 & VDE0660 standards.Packing: Standard export carton

Used for measuring volts and amps..Product made in Hungary by GANZ instruments, 100% European, High quality and guaranteed longevity.