Sensors

PME-1 Single Point Load cellSingle Point load cell. Low capacity. Suitable for platforms of 350 mm x 350 mm.

GCY-3 compression ring type load celL to be used in high weight applications.

CCP-4 compression load cell, specially designed to be used in high weight applications.

2 Years Battery Life Tamper and Battery Control Factory ID Coded

Microprocessor Based Design Changes Every Wired Control Panel Into Wireless 5 Zone, 1 Tamper, 1 Battery Low and Signal Sabotage Outputs, 1 Siren Input 8 Devices can be Assigned to Zones 4 Seperate Sirens can be Connected Factory ID Coded User-Friendly Programming and Operation 500 mt Coverage Range in Open Area High-density SMT Design LCD Display

Specifications8 Keypad Connection by Databus Technology User-friendly programming 1 Master Code, 1 Installer Code, 12 User Codes, Duress Code Self-lightening Modular installation Modular Unit for Arm/Disarm All input and outputsareelectronically protected Zones Supported4 + 4 on-board zones with eol resistor supervisionsupporting NO or NC contacts Intellizone, Silent Zone, 24 Hour Fire Zone, Instant Zone Zone Auto Shutdown, Bypass Enabled Zone Features Programmable Zone Speeds International Communication FormatsAdemco Contact ID Silent Knight (1400 Hz 20 bps) OutputsSiren Power Output (fuseless electronic shutdown, automatic restore) Siren Start Output (open collector) Auxiliary Power Output (fuseless electronic shutdown, automatic restore) Programmable two different PGM Outputs (open collector) Other Features50 Event Buffers 10 Alarm Memories Telephone Line Supervision Battery, Short-Circuit and Sabotage Supervision Panic Alarms Regular Arming, Stay Arming, Away Arming Power Shutdown

About GAO RFID Inc.GAO RFID Inc. is a leading provider ofRadio Frequency Identification (RFID) hardware and solutions to end usersworldwide. GAO RFID combines best of breed with low cost RFID readers, RFIDtags and enabling-RFID software. We have a wide variety of RFID readers, tagsand antennas in all the RFID technologies, Low Frequency (LF), High Frequency(HF), Ultra High Frequency (UHF, Gen 2) as well as Active andSemi-Passive. GAO RFIDs products andservices are easily customized for use in Asset Tracking, Health care, Supply Chain & Logistics,Event Management, Access Control, Livestock Tracking, Inventory Control &Management, Field Service, Maintenance and Document Authentication.For more information please visit

A low cost visible light sensor, with a current output which is directly proportional to the light level. It has a built in optical filter to provide a response which is close to the human eye, or photopic. The output current can be converted to a voltage by connecting it in series with a resistor. The dynamic range is determined by the external resistor and power supply (10K and 5V gives a range of 0 to 200 Lux, but can be over 700 Lux with a 1K resistor). The internal dark current cancellation enables high accuracy over the full temperature range, even at low light levels. Features:· Integrated high gain photo-current amplifier· Dark-current cancellationSize: 3.2*1.6*1.1mmElectrical specification:1. Infra redresponse: 900nm, 1% ofpeak2. Light current @ 200lux:150-350uA@100lux: 75-175uA @10lux: 7.5-17.5uA3. Dark current @ 0 lux, Ta=25degreeC: <1 nA @0 lus, Ta=85degree C: 150 nA4. Useable light range (Rss &Vdd dependant): 600-1000luxApplications:· Dawn/dusk

ModelESR-25AAESR-40AAESR-60AARated Current25A max.40A max.60A max.I2t for fuse259A2s664A2s1800A2sSurge Current275A 410A 850A Peak Voltage1200VAC1200VAC1200VACOutput Voltage 24 ~ 380VACInput Voltage20 ~ 265 VAC/DCTurn off Voltage10 VAC/DCInput current 3VA max.Control MethodZero cross switchingLeakage Current5 mAResponse Time49.8 ms (60Hz)Over Heat ProtectionTurn off output over 120?CReset below 110?CInput Immunity2 KV (EN61000-4-4)Dielectric Strength4 KVrms (EN60950/VDE0805)Insulation Strength100M? / 500VDC (EN60950/VDE0805)Circumstance-40?C ~ +80?C35~85%RH

TypeTerminal TypeModelSSR-10VASSR-25VASSR-40VARated Load Current10A25A40AInput DataVariable ResistanceTrimmer/250k??to 110V , 500k??to 220V , / M??to 380VControl MethodPhase ControlOutput DataOperating Voltage24~380VACMin. Back Voltage600 VAC (Repetive)Voltage Drop1.6V / 25??Max. Durated Current135A275A410ALeakage Current 5.0mA5.0mA5.0mAGeneral DataDielectric StrengthOver 2.5KVAC / 1min.Isolation StrengthOver 50M??/ 500VDCOperating Temperature-20?? ~ +80??Housing MaterialIntensive ABSWeightAppr. 105g

ModelLT-40MXLT-80MXLT-150MXSetting Distance40m+50%80m+50%150m+50%Min. Sensible Object10.0??30.0??50.0??Sensitivity AdjusterNonHysteresis20% of setting distanceResponse Time5ms50msOperating Voltage10~30VDC ; Ripple20mACurrent ConsumptionEmitter30mA ; Receive20mAOutput MethodNPN&PNP two way outputLight SourceInfrared LEDCableEmitter: 2Cores/4.2???2m ; Receiver: 4Croes/5.0???2m Operating Temp./Hum.-20?? ~ +60?? ; 35% ~ 95%RH Housing MaterialCu Plated Ni

for electronic scale use

Rectangle Shape for transmitting wire or booth barHall current sensor for PCB or panel installation and measuring of medium current Product Features Unlike the general product, the hall current sensor for large current measuring has been designed to randomly adjust the saturation range of the current measured. Characteristically, this current sensor consists of 2-mode outputs, such as of reverse output and normal output in order to increase the application level and noise quality of output signal within the high range of electric field associated with large current measuring.Hall current sensors for large current measuring are made with large inner diameters. Therefore, caution must be taken in installation process to consider the concentricity errors generated. - Rated Current Range : ±1,000 ~ 5,000[A]- Frequency Range : 0 ~ 5KHz

Rectangle Shape for transmitting wire or booth barHall current sensor for PCB or panel installation and measuring of medium current Product Features Unlike the general product, the hall current sensor for large current measuring has been designed to randomly adjust the saturation range of the current measured. Characteristically, this current sensor consists of 2-mode outputs, such as ofreverse output and normal output in order to increase the application level and noise quality of output signal within the high range of electric field associated with large current measuring. Hall current sensors for large current measuring are made with large inner diameters. Therefore, caution must be taken in installation process to consider the concentricity errors generated. - Rated Current Range : ??00 ~ 2,000[A] - Frequency Range : 0 ~ 10KHz

Rectangle Shape for transmitting wire or booth barHall current sensor for PCB or panel installation and measuring of medium current Product FeaturesTo be inserted in panels and applicable to 40mm booth bars/ cables Wide range of rated current Circuit part located at the lower section of the product for convenience of use - Rated Current Range : ±200 ~ 1,500[A] - Frequency Range : 0 ~ 10KHz

Round Shape for transmatting wiresHall current sensor for PCB installation and measuring of medium currentProduct FeaturesTo be inserted in panelMulti-holed(2/ 3 holes) productConvenient for video detection and in measuring of single-phase/ three-phase current- Rated Current Range : ??0 ~ 200[A] - Frequency Range : 0 ~ 50KHz

Round Shape for transmitting wires Hall current sensor for PCB installation and measuring of medium current Product Features To be inserted in panel.Outstanding designMeasuring hole of 28mm in diameter with diverse heights from 15mm to 56mm from the bottom to the center28mm.Wide range of application and outstanding quality. - Rated Current Range : ±40 ~ 600[A] - Frequency Range : 0 ~ 20KHz

Round Shape for transmitting wires Hall current sensor for PCB installation and measuring of medium current Product Features To be inserted in panel.The inside area designed 20mm lower from the bottom to the center.Wide range of application and outstanding quali.- Rated Current Range : ±40 ~ 500[A] - Frequency Range : 0 ~ 25KHz

Round Shape for transmitting wires Hall current sensor for PCB installation and measuring of medium current Product FeaturesTo be inserted in PCB and suitable for measuring of small to medium current. Suitable for mass production system ofdevices.Outstanding quality in comparison to the economic price level .- Rated Current Range : ??0 ~ 200[A] - Frequency Range : 0 ~ 50KHz

Product Features To be inserted in PCB and suitable for measuring of small to medium currentSuitable for mass production system of devices Outstanding quality in comparison to the economic price level -Rated Current Range : ??.5 ~ 1.0[A] -Frequency Range : 0 ~ 25KHz