Bearings

Feature Spherical rollers are put between the spherical raceway on the outer ring and the two grooves on the inner ring for there bearings. Since the center of the arc raceway on the outer ring is the same as the center of the whole bearing arrangement, there bearings are self-aligned and automatically adjust the bending of the shaft and housing and the eccentricity. The bearings can carry radial load and axial load in double directions. The especial radial load carrying capability makes there bearings suitable for heavy load and shock load carrying.

Feature They are the most typical rolling bearings with extensive applications. The raceways in both of the rings are in arc groove form, which can carry radial and axial load in double directions. They can be applied in situations where high-rotating speed and low noise and low vibration are required. Cages Deep groove ball bearings generally use pressed cages of steel sheet or brass cages. When the outer diameter is less than (inclusive)400mm, they use pressed cage with steel sheet. When the outer diameter is bigger than 400mm,they use brass cages. Applications Can be found in automobiles, machine tools, motors, instruments, construct machines, railway vehicles, agricultural machines and various other special machines Types Basic type, With snap ring groove on the outer ring(-N),With one shield(-Z) on one side or two shields(-2Z) on both sides, With one seal(-RS)on one side or two seals(-2RS)on both sides.

The Automatic Gate Operator adopted the tecnology of advanced electron safety control system, it is more safe if it is connected with the advanced safety control system, it is more safe, it is conected with advanced external equipment.our gate operator can suit for the different standard of voltages in various countries. Some of our gate operators are obtaining CE,Rohs,FCC,C-tick and EMS certification. Inrecent years,we have already expoted theses gate operators to the countries of America,Europe,Oceania,Africa,Asia and Southeast Asia area, and have warm welcome and enjoy high reputation by customers. Learn More:http://www.gateoperatorkit.com

Double-row angular contact ball bearings are basically two single-row angular contact ball bearings mounted back-to-back except that they have only one inner ring and one outer ring, each having raceways. They can take axial loads in either direction. Wendy Dalian Horton Co., Ltd. No.268 Jiefang Road, Dalian, China Tel: 0086-411-82336577 / 82336578 Fax: 0086-411-82336278 E-mail:horton@online.ln.cn beyondyuanyuanli@163.com MSN: beyondyuanyuan@hotmail.com

Deep Groove Ball Bearings with simple structure , are easy to use and maintain. These bearing are mainly used to support radial load and a certain amount of axial load. If enlarged the radial internal clearance of these bearings, the bearings have the features of the angular contact ball bearings and can support a heavier axial load. Thesebearings have a less frictional resistance and a high limiting speed , so can operate satisfactorily under high-speed condition. The ball bearings with shield(s) and seal(s) have been lubricated with high quality grease when assembled the bearings. They should not be heated or cleaned before being mounted and relubrication in service is not required. The bearings can be used at operating temperature from -30? to +120?. deep groove ball bearing bore diameter from 10mm to 1000mm, 6000 series, 6200 series, 6300 series, 6400 series, 6700 series, 61800 series, 61900 series, 62200 series, 62300 series, 63000 series, R series, RLS ser

These bearings have a spherical raceway in the housing washer and barrel-shaped rollers obliquely arranged around it. Since the raceway in the housing washer is spherical, these bearings are self-aligning. They have a very high axial load capacity and are capable of taking moderate radial loads when an axial load is applied Wendy Dalian Horton Co., Ltd. No.268 Jiefang Road, Dalian, China Tel: 0086-411-82336577 / 82336578 Fax: 0086-411-82336278 E-mail:horton@online.ln.cn beyondyuanyuanli@163.com MSN: beyondyuanyuan@hotmail.com

Angular contact ball bearings are designed to support combined radial and thrust loads or heavy thrust loads depending on the contact angle magnitude. The bearings having large contact angles can support heavier thrust loads. They are suitable for a wide range of applications including high speed machine tool spindles. Wendy Dalian Horton Co., Ltd. No.268 Jiefang Road, Dalian, China Tel: 0086-411-82336577 / 82336578 Fax: 0086-411-82336278 E-mail:horton@online.ln.cn beyondyuanyuanli@163.com MSN: beyondyuanyuan@hotmail.com

Four point contact bearings are single row angular contact ball bearings and therefore require significantly less space in an axial direction than double row designs. The bearings comprise solid outer rings, split inner rings and ball and cage assemblies with brass or polyamide cages. Due to the two-piece inner rings, a large number of balls can be accommodated. The halves of the inner ring are matched to the specific bearing and must not be interchanged with those of bearings of the same size. The outer ring with the ball and cage assembly can be fitted separately from the halves of the inner ring. Wendy Dalian Horton Co., Ltd. No.268 Jiefang Road, Dalian, China Tel: 0086-411-82336577 / 82336578 Fax: 0086-411-82336278 E-mail:horton@online.ln.cn beyondyuanyuanli@163.com MSN: beyondyuanyuan@hotmail.com

Taper roller thrust bearings of the double direction type are mainly used together with multi-row cylindrical roller bearings in rolling mill applications. Those bearings with a plane shaft washer are the more popular as they are able to accommodate slight eccentricities of the shaft with respect to the housing bore, of the order of the radial internal clearance of the radial bearing with which they are used. A spacer sleeve is arranged between the two housing washers. This is dimensioned so that the cover screws of the chock can be fully tightened and no special spring adjustment of the bearing is required

Typical applications: injection molding machines, crane hooks, vertical pumps Our mainly exporting size of Bearings Inner Diameter are:100mm---5000mm Our products had passed ISO9001:2000 Certifications.

Four row tapered roller bearing is one of the main roll bearings , including cylindrical bore and taper bore. Four row tapered roller bearing with cylindrical bore called as TQO . It’s make up of two inner rings , three outer rings , inner space ring ,outer space ring ,taper rollers and retainer .It can take radial load as well as axial load at the same time. It is usually used for four high mill’s work roll , back-up roll and the roller of breaking down mill and beam mill . Usually which work with the axle journal not tightly Four row tapered roller bearing with tapered bore is developing on basis of TQO bearings. The frequent appeared structure is the type of TQITS . Because inner bore have conical degree, so it can work with axis journal tightly , avoiding the squirm on the surface of roller neck . Compared with TQO, it’s much more complex in use and pretty difficult in producing . So, it can only use in high speed and high precision roll Our products had passed ISO9001:

Mainly used in motorcycle rear axle wheel hub, heavy machine tools' main shafts, big power reduction gears, axletree axle boxes, roller wheels of transportation devices, and the supporting rollers and working rollers of the rolling mills. Our products had passed ISO9001:2000 Certifications. mainly exporting size of Bearings Inner Diameter are:100mm---5000mm

Mainly used in motorcycle rear axle wheel hub, heavy machine tools' main shafts, big power reduction gears, axletree axle boxes, roller wheels of transportation devices, and the supporting rollers and working rollers of the rolling mills. Our products had passed ISO9001:2000 Certifications. mainly exporting size of Bearings Inner Diameter are:100mm---5000mm

Four row cylindrical roller bearing is usually use in rolling mill’s work roll or back-up roll. It mainly take much radial load , which is extensively used on the work roll of wire rod mill, section mill and bloomer mill , as well as the back-up roll of dressing machine , cold rolling mill and hot rolling mill .There are three kinds of structures: FC , FCD , FCDP . There are three grades for tolerance : 0 , 6 , 5. Our mainly exporting size of Bearings Inner Diameter are:100mm---5000mm Our products had passed ISO9001:2000 Certifications.

Typical applications: electric motors, automotive applications, home appliances, industrial equipment Our mainly exporting size of Bearings Inner Diameter are:100mm---5000mm Our products had passed ISO9001:2000 Certifications.

We can spply SKF and other Japanees, Korean and Chinees bearing with very competative price. Saad Mahmood Vanguard General Trading FZC P.O. Box. No. 49108 Hamriyah Free Zone Sharjah U.A.E Tel: 00971 6 5625209, Fax: 00971 6 5625210 Mobile: 00971 50 7696794 / 3008770 Email: venguard@emirates.net.ae Web: www.Industrial-strainers.com

Featus: 1)6000 series,6200series, 6300series, 6400series. 2)1600series, 3)water pump bearing.

Our ball bearing for automobiles, electric motors, computers, instruments&meters, power tools, lawn&garden machines and so on. Our main products included 608ZZ/2RS,6000-6003ZZ/2RS, 6200ZZ/2RS, 6201ZZ/2RS, 6203ZZ/2RS 684-6805ZZ/2RS, 693-6905ZZ/2RS and R Inch Series.

cylindrical roller bearing wide selection for your choose with high quality and competitive you can order by your specific request and design. welcome to contact us.

thrust ball bearing 51100-51320 wide selection for your choose , high quality and competitive price we also could provide you as your specific request and design welcome to contact us