Bearings

Ceramic ball especially Si3N4 have the following performance as low density, high strength, low friction coefficient, electrical and magnetism resistance, wear resistance, well rigidity, lubrication and maintenance free when working. It is the best choice for rollers (inner ring and outer ring are made by metal) of the hybrid construction ceramic ball bearing which are used in high-speed, high accuracy and log life environments. Normally, GCr15 or AISI440C, 316 304 makes inner ring and outer ring? The ceramic ball can adopt ZrO2, Si3N4 or Sic. Welcome to our website: www.linna-cn.com E-mail: mertina@linna-cn.com

Ceramic cage has excellent performance as wear and corrosion resistance, high strength, lubrication and maintenance free when working. Adopting the ceramic cage, Ceramic bearing can be used in the most inclemency environments as corrosive, low temperature, high vacuum. The normal used ceramic material with ZrO2. Welcome to our website: www.linna-cn.com mertina@linna-cn.com

Full ceramic bearing have excellence performance as special electrical and magnetism resistance, wear and corrosion resistance, lubrication and maintenance free when working, especially high and low-temperature application, etc, which could be used in awful environment and specially conditions. The rings and balls made by full ceramic material: ZrO2, as a standard constructor, the cage made by PTFE. Generally we also could make the cage with GRPA66-25, PEEK, PI, AISI SUS304, SUS316, CU, etc. Welcome to our website: www.linna-cn.com mertina@linna-cn.com

The plastic ball bearing units specially have the performance of corrosion and wear resistance, reduce vibration and anti-bump, are free from the maintenance and so forth. Aim at working in different environment, the ball bearing for units made with POM, HDPE,PP, UPE, PTFE or PEEK material, housing of the bearing units generally made with PBT material. Welcome to our website: www.linna-cn.com E-mail:mertina@linna-cn.com

HDPE,PP,UPE(UHMWPE) are approved can be used in faintish acid and alkali environment(30%Cucl2 solution and 30%NAOH solution is tested ok). Such bearings can operate in liquid and contamination sensitive environments as acid/alkali/salt/oil/gas/seawater, have general performance of lubrication and maintenance free, none magnetism, anti-rust and eroded of plastic bearings. Among these three material, UPE more excellent strength and low friction and could be used to lower temperature (lowest to -150°C). Generally the rings and cage made with HDP.PP or UPE, balls made with glass stainless or ceramic. Welcome to our website:www.linna-cn.com E-mail: mertina@linna-cn.com

Material POM and PA have excellent mechanical strength and wearing resistance, is suitable for manufacturing precision plastic bearings,with good self-lubrication performance and low friction coefficients. In addition and high speed application. Plastic bearing made with POM is the most extensive sort of all the plastic bearings. Generally the inner and outer rings made with POM or PA. Cage made with PA and the balls made with glass, stainless or ceramic. These bearings could be used in some al kali environment but not proper to some acid environment. Welcome to our website: www.linna-cn.com mertina@linna-cn.com

As the typical type of fluoro plastic, PTFE and PVDF have the most excellent anti-corrosion performance among them. As the typical type of fluoroplastic, PTFE and PVDF have the most excellent anti-corrosion performance, among them PTFE is the best of all the plastic known to man, could be used in all the strong acid and alkali application, including HF and smoke formation H2SO4 HNO3 or HCL(98%)above).etc. and could be used in high temperature application. PTFE could be used to 180°C and PVDF to 150°C. But PTFE has very low mechanical strength, easy to be out of shape and have large Dimension change when the temperature rise or reduce. So they couldn't be used in heavy load and high-speed occasion. Compare with PTFD, PVDF has better competitive performance. Generally the rings and cage made with PTFE or PVDF, and balls made with glass, ceramic or stainless. Welcome to our websit: www.linna-cn.com mertina@linna-cn.com

As newly developing engineering plastic material, PEEK and PI have been approved have the strongest mechanical strength and could endure the highest temperature among all the plastic material. PEEK could work at 260°C and PI at 300°C in long-term. Moreover they have excellent anti-corrosion performance could be used in strong acid and alkali environment. So generally they are used to manufacture bearings running in rigor environment. As the material is expensive, the costs are high. Generally the rings made with PEEK or PI.Cage with PTFE, PEEK or PI and ball with ZrO2 or Si3N4. Welcome to our website: www.linna-cn.com E-mail: mertina@linna-cn.com

Full ceramic bearing made with Si3N4 have some better performance than ZrO2, the rings and balls made by full ceramic material:Si3N4, as a standard constructure, the cage made by PTFE, generally we also could make the cage with GFRPA66-25, PEEK, PI, Phonemic Textiles Tube, etc. Compares than the material of ZrO2, the Si3N4 ceramics bearings could endure heavier load and could be used in higher temperature environment. Also we could offer precison ceramic bearing which generally used in high-speed and high-rigidity spindle. The manufactured clearance could be P4 to UP grade. Welcome to our website: www.inrbearing.com E-mail: mertina@linna-cn.com

Complex-dry lubricant bearings are to apply Multi-self lubricant complex material on the bearing surface. The applications not only increase the RPM of the bearing, lower the noise during working, reduce the rotation friction but also highly extend the bearing life. It is widely used for textile machinery, print machinery, tobacco machinery, medical machinery and food machinery with high environmental request. Welcome to our website: www.inrbearing.com E-mail: mertina@linna-cn.com

The high performance stainless steel bearings can provide not only with the cleanliness and corrosion resistance characteristic also with the high accuracy and excellent wear resistance compare to the high carbon chrome steel bearings. The rings and balls are made of the material as a standard structure of stainless steel bearing. The rings and balls are made of the material of AISI440C(9CrMo or 9Cr18),the cage and the framework of seal adoption the AI304 or Ai316,production accuracy could reach ISO standard ABEC-1 and the vibration level reach Z1grade and above. Welcome to our website: www.inrbearing.com E-mail: mertina@linna-cn.com

Insulated bearings can reduce or stop the electrical current through the body of bearing, prevent the strong electrical current to damage the bearing raceway during bearing working. In this way, it can increase the lifetime of the bearings under current environment. We can design outer ring insulate or rolling element insulate as per customer's request, or as per the bearing type. Welcome to our website: www.inrbearing.com E-mail: mertina@linna-cn.com

Plan housing washer type Bearing NO : 51100 (D:24 d:10 B:9 Rsmin:0.3 Weight:0.024) to 51432 (D:320 d:160 B:130 Rsmin:4 Weight:51.2) Spherical housing washer type 53200 (D:26 d:10 B:11 Rsmin:0.6 Weight:0.03) to 53332(D:270 d:160 B:91.7 Rsmin:3 Weight:21) With spherical seating washer 53200U (D:26 d:10 B:11.6 Rsmin:0.6 Weight:0.029) to 53332U(D:270 d:160 B:100 Rsmin:3 Weight:21) Material : GCr15 Package: as the requirement Delivery time : Related to quantity and specification (one month in usual)

Bearing NO : 20211 (D:100 d:55 B:21 Weight:0.641) to 22332-VS (D:340 d:160 B:114 Weight:51.3) Material : GCr15 Package: as the requirement Delivery time : Related to quantity and specification (one month in usual)

Bearing NO : 30202 (D:35 d:17 B:11.75 ) to 32313 (D:140 d:65 B:51 Weight:3.6) 32005X (D:47 d:25 B:15 Weight:0.116) to 32022X(D:170 d:110 B:38 Weight:3.09) Material : GCr15 Package: as the requirement Delivery time : Related to quantity and specification (one month in usual)

Bearing NO : 7003C (D:35 d:17 B:10 Rsmin:0.3Weight:0.038) to 7320C (D:215 d:100 B:47 Rsmin:3 Weight:6.9) 7003AC (D:35 d:17 B:10 Rsmin:0.3 Weight:0.046) to7313AC(D:150 d:70 B:35 Rsmin:2.1 Weight:2.56) 7304B (D52 d:20 B:15 Rsmin:1.1 Weight:0.14) to 7320B(D:215 d:100 B:47 Rsmin:3 Weight:7.32) Material : GCr15 Package: as the requirement Delivery time : Related to quantity and specification (one month in usual)

Bearing NO : 1203 (D:40 d:17 B:12 Rsmin:0.6 Weight:0.072) to 1318(D:190 d:90 B:43 Rsmin:3 Weight:5.95) 2203 (D:40 d:17 B:16 Rsmin:0.6 Weight:0.85) to 2318(D:190 d:90 B:64 Rsmin:3Weight:7.77) Kinds: all Material : GCr15 Package: as the requirement Delivery time : Related to quantity and specification (one month in usual) It has two structures: The cylindrical hole and the taper hole. The holding material is steel plate and syn-resin. It can dajust the inner part automatically

Deep groove ball bearing Bearing NO : 6003 (D:35 d:17 B:10 Rsmin:0.3 Weight:0.04) to 62314(D:70 d:150 B:51 Rsmin:2.1Weight:3.58) 16004(D:42 d:20B:8 Rsmin:0.3 Weight:0.05)to 16030(D:225 d:150 B:24 Rsmin:1.1Weight:2.64) Kinds :Z ,2Z,RZ,2RZ,RS,2RS

Zhejiang Wenling Anything Industrial Trade Co.,Ltd was founded in 2000.It is located on Zhongxiang Industrial Zone ,Wenling ,Zhejiang .Our company is specialized in producing auto parts and motorcycle accessories,such as spare parts, flanges, shafts, and also other universal industrial products,such as shelves, hold-down plates, bed stilts, trolleys and the electrical machine brackets.The equipments used in our factory are the domestic advanced production line,like numerical-controlled lathe,instrument lathe and drill press. Our company has passed ISO9001-2000 International Quality System and have CE Certification.

Zhejiang Wenling Anything Industrial Trade Co.,Ltd was founded in 2000.It is located on Zhongxiang Industrial Zone ,Wenling ,Zhejiang .Our company is specialized in producing auto parts and motorcycle accessories,such as spare parts, flanges, shafts, and also other universal industrial products,such as shelves, hold-down plates, bed stilts, trolleys and the electrical machine brackets.The equipments used in our factory are the domestic advanced production line,like numerical-controlled lathe,instrument lathe and drill press. Our company has passed ISO9001-2000 International Quality System and have CE Certification.