Gaskets and Seals

This product is formed by mechanically or sticking flexible graphite sheets together with metal plate. It has good compressibility and resilience, excellent sealing property for microscopic surface irregularities and long working life. It is mainly used for making cylinder gaskets of engines and punching into all kinds of sealing gaskets. Length:1500mm; 1000mm; 500mm Width:1500mm; 1000mm; 500mm Thickness:1.0 to 4.0mm Type: 1. Graphite sheet with tanged 0.1mm SS 316 inserted 2. Graphite sheet with tanged 0.1mm SS 304 inserted 3. Graphite sheet with tanged 0.2-0.25mmcarbon sheet inserted 4. Graphite sheet with flat 0.05mm SS 316 inserted 5. Graphite sheet with metal mesh inserted 6. Graphite sheet with non-metallic fiber inserted.

In every size and diameter NR, SBR, EPDM, NBR, Silicon, HNBR, Viton... Etc. Seals, orings and gaskets, various leakage preventing elements.

Braided from flexible graphite yarn. Pump or valve application. Chemical and high temperature resistant, self lubricating. Other styles: 1000W: Inconel wire reinforced graphite packing for valve application 1000C: Carbon corner reinforced graphite packing.

These products can be produced according to BS4504 and BS2494 standards.

Spiral wound gasket Aiflon spiral wound gasket (SWG) consists of a thin metallic strip and soft non-metallic filler that are simultaneously wound on a rotating mandrel. The metal hoop is pre-formed with a V or W shaped profile, which allows the gasket to act as a spring between the flanges. Further, the hoop provides the basic structural element for the gasket while the non-metal filler material seals small imperfections on the flange surfaces. Depend on its excellent compression resilient, it"s suitable for sealing spots where the alteration of temperature and pressure are frequent, such as pipes, valve, pumps etc. They are available in all standard the flanges of sizes, e. G. ANSI, API, DIN, JIS, JPI, BS etc.

Material: NBR / Silicone / Viton / HNBR / EPDE / CR / PTFE / PU / ACR / SBR Size: Metric / inch 225pc o-ring kit, 382pc o-ring kit, 386pc o-ring kit, 404pc O-ring kit, 407pc, 419pc o-ring kit, etc

We are one factory of Haybow group, specialized in rubber products for several years.The main products are consist of 100 kinds of rubber sheet and rubber matting. It also can manufacture all kinds of rubber products with special specification and performance. They are widely applied in industrial manufacturing, electric and irrigation works, vehicle and water conservancy, gymnastic ground and so on. The products are sold well in the regions and countries of Europe, America, southeast Asia, Australia and middle east.Main products:Common black rubber sheet, common black rubber sheet with cloth insert, nitrile rubber sheet(nbr), stryrene butadiene rubber sheet(sbr), neoprene rubber sheet(cr), ethylene propylenediene rubber sheet(epdm), silicone rubber sheet(muq). Fluorine rubber sheet(fpm), oil proof rubber sheet, cold-proof & heatproof rubber sheet, acid-proof & alkali-proof rubber sheet, insulating rubber sheet, fir-resistance rubber sheet, white food grade rubber sheet. Nature rubber

Material PP, triple locking mechanism Sold as blank seal, no numbering Transparent cover for viewing of locking mechanism once sealed Matt of 5 pieces Multiple choices of colors Length:245mm Packed 1000 pcs in carton box

Saudi Rubber Products Factory is the Pioneer in Production of high quality technical rubber parts. Our commercial and technical personal has many years experience in this filed. We have specialized in the production of O-Ring, Grommet and Top Hat, Seals and Pipe Seals. We are moulding (SBR, NBR, EPDM, and SILICON). Saudi Rubber Products Factory is well equipped with latest rubber manufacturing machinery. Production process is undergoing quality control.

We supply 3s system rubber seal for PVC pipe, all sizes. With high quality and best price

Spiral wound gasket is formed of V-shaped of W-shape stainless steel stripe and soft nonmetallic packing or the material of flexible graphite asbestos, nonasbestos, PTFE etc by means of piled. it can use inner ring and outer ring as different material such as carbon steel , stainless steel 304, 316, 316L and etc . The static sealing element of pipe, valve, pump, thermal exchange, condensing motorcycle, auto vent-pipe, tower, plain hole and hole of flange, etc.

Features: Pressure: 0. 6mpa Speed: 12m / s Temperature: -30~200 Degree Combined materials: Axial Pipe (SUS304 / SUS316) Stationary Seat ( (SUS304 / SUS316) ) Bellows (NBR / EPDM / VITON) Spring (65Mn / SUS304 / SUS316) Rotary Ring (Ceramic / SIC / TC) Stationary Ring (Carbon / SIC / TC) Cup Gasket (NBR / EPDM / VITON)

Features: Pressure: 0. 6mpa Speed: 15m / s Temperature: -30~200 Degree Combined materials: Stationary Ring (Carbon / SIC / TC) Rotary Ring (Ceramic / SIC / TC) Secondary Seal (NBR / EPDM / VITON) Spring & Other Parts (SUS304 / SUS316)

Features: Pressure: 0. 6mpa Speed: 15m / s Temperature: -30~200 Degree Combined materials: Stationary Ring (Carbon / SIC / TC) Rotary Ring (Ceramic / SIC / TC) Secondary Seal (NBR / EPDM / VITON) Spring & Other Parts (SUS304 / SUS316)

key words:seal, packing,rubber gasket.rubber seal. if you you have any question feel free to ask and please contact me: nancyATchinapipe-valve.com .Kinds of Gasket 1.A.Wound style gasket consists of four type:basic type,with inner ring,with outer ring,and with inner and outer rings. B.Heat exchanger wound style gasket:basic type and with inner and outer rings. 2. Normally matrial used: A.Steel tape:08F,0Cr18Ni9(304),0Cr18Ni9Ti,1Cr18Ni9Ti(321),0Cr17Ni12,M02(316),00Cr17Ni14M02(316L). B.(Cold roll)steel plate for inner and outer ring:Outer ring:mild steel,0Cr13 and 0Cr18Ni9 Inner ring:same as steel tape,special order is a available through negotiation. C.Nonmetal tape:flexible graphite,special made asbestos,teflon and non-asbestos paper. Scope of Application 1. Working temperature:-196 -700(not higher than 600 in oxidic medium) 2.Working pressure:=25MPa 3.Gasket coefficient:m=2.5-4 4.Min.pre-tightening specific pressure:y-68MPa 5.Max.machinable size:-2800mm

key words:rubber gasket,rubber seal. seal, packing Due to its excellent elasticity, performance of insulation, plasticity, insulate air&water, rubber products are widely used in industries, agriculture, national defence, transportation, mechanism, medical industries and our daily life. Viton EPDM Teflon Fluorosilicone Teflon Encapsulated Hypalon Buna-N Viton ETP Silicone Neoprene Aflas Nature Rubber if you have any question about our products feel free to ask. please contact me: nancyATchinapipe-valve.com

Bearing isolators or bearing protecting devices to enhance bearing life to upto 5 times for Pumps, Motors, Machine tool spindles, Gear boxes, Pulverisers, Steam turbines, conveyors, blowers, fans, cylinder rolls in paper and textile industries.

The gasket are made of a reinforced graphite sheet or non asbestos sheet by punching or pressing, depend on its excedllent corrosion-resistance, high-and-low temperature resistance, finecompression resilient the product is widely applied as cylinder head seals of automobile engine, diesel engine, air compressor, refrigerating machine, etc. Serice Range PH Temp. Pressure 0-14 -200~+600C 20Mp Thickness: 1.5mm 3.0mm 4.5mm

Graphite gaskets are cut from pure graphite sheet or graphite sheet with metal reinforcement, features excellent corrosion-resistance, high-and-low temperature resistance, good compression resilient and high intensity. It can be used as sealing elements of pipe, valve, pump, pressure vessel, heat exchanger and condenser, etc. Other complex gaskets such as water gauge gasket and flange gasket with bolt holes are available. Moreover, wrapped with metallic stripe in the inner and outer circle borderline, it can keep the excellent performances and can be installed and disassembled conveniently without damage. Thickness:1.5mm,2.0mm,3.0mm,4.5mm

The features is below: 1. Resistance to high temperature and high pressures. 2. Great resilience which allows the gasket to adjust automatically to change in operating conditions, Such as pressure and thermal shocks, vibrations etc. 3. Excellent sealability is maintained with comparatively small gasket area. 4. Good tolerance for flange surface finish irregularities. 5. Can be designed to any dimensions economically in circular or moderately noncircular shape. 6. Available in a variety of hoop metals and filler materials to satisfy specific operating conditions.