Industrial Materials

Model LCY-III Automatic Binder Recovery Unit The machine is Performed almost similar to to the European origin machines of this nature. It is used to perform reliable analyze on bituminous mixtures utilizing non flammable non explosion solvents, for quantative determination of binder or bitumen contained in pavement samples and hot mixed mixtures. The system performs in only one complete automatic cycle: Washing dis aggregations and separation of the bituminous mixture. Separation of the filler from the solution formed by solvent , bitumen , solvent and filler.Recovery and distillation of solvent material allowing a further utilization. This unit, in a short time performs out a series of analyses that normally require a long time and labor, by reducing extraction costs. Further more the system largely reduces the emission of toxic fumes in the laboratory and avoids the manipulation of solvents to the operator. The Unit comprises. An electromagnetic sieving unit , e

Model LCX-2 3 Asphalt mixture wheel roller compactor Used for compress of Asphalt mixture in the laboratory to pretend the insitu compaction Forework: This appliance can use to compress Asphalt slabs to a specified density using loads per unit roll width, which are similar to Highway road rollers. These compressed slabs could be used as cored to provide samples for in direct tensile, these slabs can be used an the specimens of “Trade Experiment System” Model LLN-1, the micr processor based digital controller, starts, stops, selecting of designed forced and frequency of roller passed. Model LCX-2 Hydrolic pressure drive; Model LCX-3 Penumetic drive. STANDARD: EN 12697-33 Main specifications: Max load: 12KN Width of rollen: 300mm Voltage: 230V 50HZ 1ph Power: 1.5KW Dimen: 1700×6004×1300mm Weight: 500kg

HWY-15 Digital Constant Temperature WateR Bath This Apparatus is mainly designed to get low temperatures required to perform bitumen penetration test .The bath consists of a programmable micro processor based temperature controller and could be set the temperature higher than 25?.Inner chamber is made of stainless. Main specifications: Temp range: 0?~80? Accuracy: ±0.1? Inner chamber dimensions: 460×280×240mm Voltage: 220V, 50HZ Power Heater: 1KW Cooler: 300W

Model 85 Rolling Thin Film Oven Rolling Thin Film Oven is used to measure the effect of heat and air on a moving film of semi solid asphaltic materials. Through the use of microprocessor based progremmed temperature controller the oven accurately maintains the required test temperature 163?±1?. Oven includes a flow meter, air pressure gauge and a built in blower, and not required a external compressed air supply, a set of nine glass containers are supplied as standard. STANDARDS: ASTM D2872, AASHTO T240, CNR NO.54 Main specifications: Temp range: Ambient ~ 200? Voltage: 220V, 50HZ Power: 3.5KW Inner dimension: 395×465×450mm Dimension: 800×990×1400mm

Model 82 Revolving shelf oven Oven is used to conduct “thin film”tests determines effect of heat and air on a film of semi solid asphaltic materials when heated to 163?±1? STANDARDS: ASTM D1754, D6, AASHTO T179, T47, BS 2000, UNE 7110, NF T66, 011, CNR NO.50 Main specifications: Temp range: Ambient ~ 200? Accuracy: ±1? Shelf revolution: 5±0.2rpm Inner dimension: 450×550×550mm Voltage: 220V, 50HZ Power: 2800W

MODEL STZJ-1 THE STANDARD PORTABLE HEAVY TYPE INSTRUMENT WITH SOLID SHOT Main specifications: Weight: 4.5kg Shot hammer diameter: 50cm Fall high: 450mm

HZ-15 Multipurpose Core drilling machines These light weight, portable, extremely practical and easy to use. It accepts the core bits up to ?150mm in addition to core drilling it cuts and rubdown the sample. Standard: EN-12504 Main specifications: Model: HZ-15 HZ-15A HZ-15 Multifunction Max core: ?150mm ?150mm ?150mm Power: 2.2KW 2.5KW 2.5KW Voltage: 220V 220V 220V Max(cut robdown): - - 150mm Dimension(mm): 470×235×880 470×235×880 470×235×880 Net weight: 25kg 25kg 25kg

Model HZ-20/A/B Core Drill machine The H2-20 drilling machine is extremely robust heavy duly, compact and reliable. The sliding group is rectified so as to assure a very soft and accurate drilling movement. An integral water swivel and pump; built into the drill head providing a 12mm connection to an external water supply. Thanks to the built in pump and no need to have a pressured water source. The motor assembly comprises a Japanese Yamaha 4.2/6.5 HP petrol/engine speed of r.p.m 900-1300/min. All working and moving parts are chrome plated for rust protection. Used for making core samples in Asphalt, Concrete etc. Standard: EN12504-1 Main specifications: Model: H2-20 H2-20A H2-20B Max core diameter: ?200mm ?200mm ?200mm Max core depth: 400mm 400mm 700mm Engine capacitity: 4.2HP 4.2HP 6.5HP Vibrating frequency: 2.5KW 2.5KW 2.5KW Voltage: 220V 220V 220V Dimensions(mm): 1080×780×1150 1080×780×1150 1080×780×1150 Net weight: 110kg 115kg 130kg

Model BM-2 SKID RESISTANCE TESTER For measuring the road surface frictional properties. It measures the energy loss when a rubber slider edge is propelled over the surface under test .As standard ,the tester incorporates the “F scale ”,and base plate that is necessary for laboratory tests. STANDARDS: BS812-114, 8204, 6677-1, 6717, 7263-1, 3, 7932, 7976, EN 1097-8, 1341, 1342, 1338, 1344, 1336-4, 14231, DDENV 12633, ASTM E303. Main specifications: Pendulum mass: 1500g Pendulum center: 410mm Static Pressure: 22.2N Distance: 508mm Glide length: 126mm Dimension: 700×360×700mm Weight: 22kg

Model BK-1 Benkelman Beam Designed for maximum operator efficiency, the Benkelman Beam is manufactured from light weight ,durable material which can be detachable to two pieces . Direct reading dial gauges are available in metric units of measurement. STANDARD: AASHTO T 256 Main specifications: Level ratio: 2 : 1 Cent degree: 0.01mm Specification: 3.6m,5.4m,7.2m

Model XSB-88 Rotap Sieve Shaker For grading soil and aggregate. Main specifications: Sieve size: ?200mm ?300mm Sieve ro-tapping: 236r/min 236r/min Sieve shaking radius: 12.5mm 12.5mm Vertical tapping travel: 10mm 10mm Sieve vertical tapping: ?148r/min ?148r/min Mix diameter of sieves: 0.075mm 0.075mm Voltage: 380V 380V Dimensions(mm) 700×500×950 700×500×950 Net weight: 150kg 280kg

Model STMH-3 LOS Angles Abbration Machine Used to determine the resistance of aggregate to abrasion. It comprises a heavy steel cylinder of 719mm inside diamter×508mm inside length ,mounted on a base frame .The cylinder rolates at 30-33rpm machine is fitted with an automatic digital counter which can be preset to the required number of revolutions of the drum. Supplied with a set of 12 abrasive charges (according to the standards the machine has to comply) ,base fray and spanners. STANDARDS:ASTM C131,EN 1097-2,AASHTO T96,UNE 83116, UF 918-573,UN18520,CNR NO.34. Main specifications: Diameter inside the tube×Length: 719×510mm Rate: 30~33 Steel ball: ?48 Voltage: 220V/380V Dimension: 830×1060×1260mm

Model STJM-3 Accelerated polishing machine The machine is used to measure the resistance of road aggregates to the polishing action of vehicle tyres on a road surfaces. Specimens are manufactured in accurately machined and matched moulds, they are then removed from the moulds and located on the “road wheel”, abrasives are continuously fed to the road wheel .Water is introduced at a controlled rate via variable flow meter and self contained water supply .Used water and abrasives are collected in a removable tray. STANDARDS: BS 812:114, EN 1097-8, NF 918,575, CNR 105 Main specifications: Voltage: 220V, 50HZ Power: 550W Road weel rotation speed: 715N~735N Applied load on specimens speed: 315~325rpm

SCQ Series Stone Cutter (SCQ 1A/4A/5A) Used for cutting cement mortar concrete or stones to a specific size. There are three different models according to its capacity of cutting height. The motor speeds are controllable by means of built in speed regulators. Outline dimensions are 1650×880×1200mm for all three models. Cutter linear speed is 33-35m/s and same for all three models. Other individual specifications are given below. Main specifications: Model: SCQ-1A SCQ-4A SCQ-5A Max cutting height: ?170mm ?210mm ?300mm Diamond cutter dia: ?485mm ?585mm ?800mm Cutting plane: single/double Single/double Single Motor capacity: 4.3KW 4.4KW 4.4KW Dimensions(mm): 1650×880×1200 1650×880×1200 1650×880×1200 Power: 380V,50HZ 380V,50HZ 380V,50HZ Net weight: 750kg 750kg 750kg

1. Adopt space voltage vector PWM control and sensorless vector control. 2. 150% of rated torque at 1 Hz frequency. 3. Perfect function, small volume, suitable for all kinds of spot. 4. Bears automatic voltage regulation (AVR) and automatic current limiting function, which makes the system more stable. 5. Built-in PID controller, can realize constant pressure (flux etc.) “one drives multiple devices” control (function in option). 6. 16 (maximum) section speed control and weaving swing frequency function give you more handy operation. 7. 0-20KHz pulse input output interfaces are convenient for making up of digital closed-loop control system. 8. RS485 communication interface(part in option) can be built inside the inverter to realize centralized control and main auxiliary consecutive action control easily.

Supermech supplies all kinds of silencer in brass or plastics. We have italy style or FESTO style. Please contact our sales for more information of style, size and others.

Supermech supplies all sizes of Standard cylinder, ISO6432, ISO6431/ISO 15552, VDMA24562, DNC series, SI series and DSNU series. They include end caps, piston, piston rod, cylinder kits (including end caps, seals, piston), mounting, clevis, joint.

Supermech supplies many style air preparation including SMC new style, SMC old style, Norgren style, Mindman style, Airtac style etc.

SuperMech develops full range of pneumatic product equivalents of Festo, SMC, Norgren, Parker and Airtac, which includes air preparation equipment (FRL), pneumatic cylinder, gripper, rotary actuator, solenoid valve, pneumatic valve, mechanical valve, manual valve, fitting, air tube and so on.

Changsha JinXin Superabrasives Co,Ltd is the biggest manufacturer and exporter of synthetic diamond powder and Cubic boron nitride powder in China .The quantity delivered to our clients is about 18 million carats each month. We export our products all over the world.80% of our products are being exported to oversea market such as India , USA,Japan, Europe, Korea, and South-East Area etc. and won highly praises from our customers. .Our most competitive products include: 1. SYNTHETIC DIAMOND a. GRITS FOR RESIN BOND(RVD SERIES, RVG SERIES, COATINGS) b. GRITS FOR METAL BOND(MBD SERIES, SMD SERIES COATINGS) c. MICRON POWDERS 2. CUBIC BORON NITRIDE a. GRITS(CBN30, CBN40 ,CBN50, CBN60SERIES, COATINGS) b. MICRON POWDERS Based on large production quantity, we are able to supply good and stable quality, goods at very competitive prices. We will try our best to offer our best products and service, and become your reliable supplier in China