Measurement and Meter

The Triple Prism Assembly is made from yellos polycarbonate with metal inserts and an aluminum yoke. It holds one or three prisms, is compatible with most screw-in prisms, and has a 0, -30 prism offset.

H. I. compatible with sokkia, topcon, pentax, nikon, and other leading manufacturers. Two offsets (30 / 0mm) are included. Silver or copper coating available. Holders available in orange, yellow, black and other colors.

The products can return incident beam which is reflected by them, along original incident direction. They have been extensively applied to the fields of laser ranging of visible light, ultraviolet band and infrared band, ground measuring, infrared tracing, and precision measuring, etc.

1.Main technical parameter: Basia error limit:+/-2.5% Pressure range:0-4bar 2.Structure principle: Flange-type diaphragm pressure-gauge is made up of the measuring system(including the joint,the remote transmission capillary,the flage-type diaphragm,etc),the designation discreteness(including the index and the dial)and the crust(including the shell\the junk ring and the watch glass). Working principle of this meter is expressed,the diaphragm feels the pressure of the midium which is measured,thus a displacement is produced in the free-end,and the displacement is magnified by the drive-organ which is made up of the deflector rod and the gear,then you can read the value by the index(it is fixed around the gear-shaft)on the dial. 3.Using condition: Working position and environment temperature:-25-55centigrade relative humidity:<=80%RH no corrosive gas around the environment. Temperature effect:Although the working temperature is not within 20+/-5centigrade,the error is less than 0.4

Product Description: Wk-r series pressure type thermostat consists of a temperature sensing packet, conductive capillaries and elastic elements and works under the principle of liquid expansion heating. When the temperature sensing packet is heated, the temperature sensing liquid gets expanded to push the elastic element to form a displacement and thus to push the micro-switch to break the circuit down while the switch can also automatically close when the temperature of the object under control reduces below the set value, thus getting a constant temperature control. The technical parameter as follows: 1. Electric performance:16A250V-10A440 2. Disconnection temperature is designed according to user's request from(-40-320centigrade) 3. The life:10 by 10000times 4. Electric intensity: AC2500v/min 5. Insulating resistance: >=50megaohm 6. Contact resistance: <30megaohm The performance parameter: Model model temp deviation dief Wk-r111xkwk-r121xk-40-40c +/-2.5k2-7c Wk-r112xkwk-r

WK-R series pressure type thermostat consists of a temperature sensing packet,conductive capillaries and elastic elements and works under the principle of liquid expansion heating.When the temperature sensing packet is heated,the temperature sensing liquid gets expanded to push the elastic element to form a displacement and thus to push the micro-switch to break the circuit down while the switch can also automatically close when the temperature of the object under control reduces below the set value,thus getting a constant temperature control. The technical parameter as follows: 1.Electric performance:16A250V-10A440 2.Disconnection temperature is designed according to user's request from (-40-320Centigrade). 3.the life:10 by 10000times 4.Electric intensity:AC2500V/Min 5.Insulating resistance:>=50Megaohm 6.Contact resistance:<30Megaohm The performance parameter: Model Model Temp Deviation Dief WK-R111 WK-R121-40-40C +/-2.5k 2-7C WK-R112 WK-R122 30-75C +/-3k 2-9C WK-R112 WK-

As a pressure type liquid expansion thermometer, it makes use of the liquid expansion by heating in the temperature sensing packet to have thus elastic element defelecting to drive the indexing plate rotating and thus to indicate the temperature of the measured medium and is suitable for measuring the temperature of a gas, liquid, steam and automatic water boiler, sterilizing cabinet, cold cabinet, foodma chinery, light and chemical industrial equipments nad liner. It features small and exquisite appearance, uniform and clear index, shock withstand, easy installation and so on. The range of temperature display:20-140c

Double-breakpoint superheat conserlancy implement is a twice protection device used With temperature contro;;er at the same time. After temperature contro;;er is Out of order, the temperature of protection function. If the sensor-based system of Protector has leakage, it can cut off the power immediately, and it only needs manual Reset when resuming the circuit.

Pressure type thermostat wk-r33 Technical parameter: 1. Electric performance:16a380v 2. Disconnection: Temperature is designed according to user's request from -40-320c 3. Electric intensity: Ac2500v/min 4. Insulating resistance: More or equal to 50 ohm 5. Contact resistance: Less 30 ohm Performance parameter: Model temperature deviation diff Wk-r331 -40c-40c -2.5-+2.5k 2-7c Wk-r332 30c-75c -3-+3k 2-9c Wk-r332 30c-90c -3-+3k 2-9c Wk-r333 30c-110c -4-+4k 2-10c Wk-r334 50c-200c -7-+7k 5-20c Wk-r335 50c-300c -10-+10k 5-30c

Specifications: 1. One display shows humidity and Temperature Memory for highest and lowest Temperature and humidity. 2. Clock 3. Measuring range: Temperature-10C to + 60 (14Fto144F) Accuracy1C (1. 8f) 4. Humidity 10% to 99% with 0 C to 50C (32F to122F) Accuracy 7% 5. Low battery detection 6. Display size: 82X60mm Unit size: 110X108X23MM

One display shows humidity and Temperature Memory for highest and lowest Temperature and humidity. Measuring range: Temperature -10C to +60(14Fto144F ) Accuracy1C(1.8F) Humidity 10% to 99% with 0 C to 50C(32F to122F) Accuracy 7% Low battery detection Display size:82X60mm Unit size:110X108X23MM

Gift tape measure with hook, Size: 9. 2cm X 5. 2cm X 1. 3cm.

Tape measure with level and pens, Size: 7. 9cm X 6. 1cm X 3. 0cm

ANRITSU MS-2667C 9KHz-30GHz MICROWAVE SPECTRUM ANALYZER Latest model, perfectly working, high performance spectrum analyzer, the Anritsu MS 2667C with original manuals and protection cover. These analyzers made by Anritsu are light weight, high performance and very reliable. They are also very cost effective. This unit has option 003 (narrow resolution bandwidth 10/30/100/300Hz) factory installed. I doubt you will see a similar unit on eBay any time soon. We are selling it reluctantly, following the closure of one of our OEM broadcast divisions. Remember, this is a current production model, fully supported by Anritsu, with a wide range of accessories and software available, should you ever need it.

You are bidding on a 5 pack of Kavo 640 Handpieces. These handpieces are in really good condition. They have triple spray and push button bur operation. They will come with a 3 month warranty.

Dial caliper, carbon/stainless, packed in a plastic box.

Whole/Mono-block Range Digital Drum Gauge, Car use,0-150mm*0.01/6in*0.0005

Digital stainless caliper, CE, Super large/large LCD screen available with size 12x40mm/12x29mm respectively. Caliper With roller wheel is available.

Lifting weight limiter, a kind a lifting weight machinery security protector, can be used for 5 to 75t bridge crane, door crane, on-off crane and other lifting equipments. It is composed of strain gauge load cell and electric control meter. The lifting weight limiter meter adopts single chip-controlled technology. Its main functions are that measuring and indicating the lifting weight timely as connecting the signal of sensor, sending out acoustic-optic alarm, outputting control signal and cutting off the rising looping power supply when weight reaches the stipulated value. Meanwhile, its characteristics are that indicating weight accurately, debugging conveniently, enacting high-low distinguishing rate and setting power supply to resist surge circuit, etc. * The limiter main technical parameter is better than that of GB12602-90 Lifting machinery over load security protector * The sensor with axle-shell, base seat and joined with model KQC meter is the most common used type of lifting

* Weighing indicator A9P is based on the model A9, the former comes with build-in micro printer additionaly. A9 adopts high precision double integral A / D conversion technology, widely applied in electronic platform scale, electronic floor scale, electronic truck scale, static railroad track scale and so on alike static weighing system equipped with 1~8 load cell. -------------------------------------- Technical Parameter: 1. A / D conversion method: Double integral 2. A / D conversion speed: 10~15 times / sec. 3. Max. A / D conversion: 500000 4. Input signal range: 0mV~18mV 5. Input sensitivity: >=1 UV / e 6. Load cell excitation: DC 8V; I=5) 15. Clock: real clock without effect on power off 16. Scoreboard interface (Standard) Serial sending signal by current loop or RS232C with baud rate 600 Transmission distance: Current loop<=100 meters; RS232C<=30 meters 17. Communication interface (RS232 C standard; RS422 optional) Serial communication interface, with selectable baud rate