Measurement and Meter

Double-breakpoint superheat conserlancy implement is a twice protection device used With temperature contro;;er at the same time. After temperature contro;;er is Out of order, the temperature of protection function. If the sensor-based system of Protector has leakage, it can cut off the power immediately, and it only needs manual Reset when resuming the circuit.

Pressure type thermostat wk-r33 Technical parameter: 1. Electric performance:16a380v 2. Disconnection: Temperature is designed according to user's request from -40-320c 3. Electric intensity: Ac2500v/min 4. Insulating resistance: More or equal to 50 ohm 5. Contact resistance: Less 30 ohm Performance parameter: Model temperature deviation diff Wk-r331 -40c-40c -2.5-+2.5k 2-7c Wk-r332 30c-75c -3-+3k 2-9c Wk-r332 30c-90c -3-+3k 2-9c Wk-r333 30c-110c -4-+4k 2-10c Wk-r334 50c-200c -7-+7k 5-20c Wk-r335 50c-300c -10-+10k 5-30c

Specifications: 1. One display shows humidity and Temperature Memory for highest and lowest Temperature and humidity. 2. Clock 3. Measuring range: Temperature-10C to + 60 (14Fto144F) Accuracy1C (1. 8f) 4. Humidity 10% to 99% with 0 C to 50C (32F to122F) Accuracy 7% 5. Low battery detection 6. Display size: 82X60mm Unit size: 110X108X23MM

One display shows humidity and Temperature Memory for highest and lowest Temperature and humidity. Measuring range: Temperature -10C to +60(14Fto144F ) Accuracy1C(1.8F) Humidity 10% to 99% with 0 C to 50C(32F to122F) Accuracy 7% Low battery detection Display size:82X60mm Unit size:110X108X23MM

Gift tape measure with hook, Size: 9. 2cm X 5. 2cm X 1. 3cm.

Tape measure with level and pens, Size: 7. 9cm X 6. 1cm X 3. 0cm

ANRITSU MS-2667C 9KHz-30GHz MICROWAVE SPECTRUM ANALYZER Latest model, perfectly working, high performance spectrum analyzer, the Anritsu MS 2667C with original manuals and protection cover. These analyzers made by Anritsu are light weight, high performance and very reliable. They are also very cost effective. This unit has option 003 (narrow resolution bandwidth 10/30/100/300Hz) factory installed. I doubt you will see a similar unit on eBay any time soon. We are selling it reluctantly, following the closure of one of our OEM broadcast divisions. Remember, this is a current production model, fully supported by Anritsu, with a wide range of accessories and software available, should you ever need it.

You are bidding on a 5 pack of Kavo 640 Handpieces. These handpieces are in really good condition. They have triple spray and push button bur operation. They will come with a 3 month warranty.

Dial caliper, carbon/stainless, packed in a plastic box.

Whole/Mono-block Range Digital Drum Gauge, Car use,0-150mm*0.01/6in*0.0005

Digital stainless caliper, CE, Super large/large LCD screen available with size 12x40mm/12x29mm respectively. Caliper With roller wheel is available.

Lifting weight limiter, a kind a lifting weight machinery security protector, can be used for 5 to 75t bridge crane, door crane, on-off crane and other lifting equipments. It is composed of strain gauge load cell and electric control meter. The lifting weight limiter meter adopts single chip-controlled technology. Its main functions are that measuring and indicating the lifting weight timely as connecting the signal of sensor, sending out acoustic-optic alarm, outputting control signal and cutting off the rising looping power supply when weight reaches the stipulated value. Meanwhile, its characteristics are that indicating weight accurately, debugging conveniently, enacting high-low distinguishing rate and setting power supply to resist surge circuit, etc. * The limiter main technical parameter is better than that of GB12602-90 Lifting machinery over load security protector * The sensor with axle-shell, base seat and joined with model KQC meter is the most common used type of lifting

* Weighing indicator A9P is based on the model A9, the former comes with build-in micro printer additionaly. A9 adopts high precision double integral A / D conversion technology, widely applied in electronic platform scale, electronic floor scale, electronic truck scale, static railroad track scale and so on alike static weighing system equipped with 1~8 load cell. -------------------------------------- Technical Parameter: 1. A / D conversion method: Double integral 2. A / D conversion speed: 10~15 times / sec. 3. Max. A / D conversion: 500000 4. Input signal range: 0mV~18mV 5. Input sensitivity: >=1 UV / e 6. Load cell excitation: DC 8V; I=5) 15. Clock: real clock without effect on power off 16. Scoreboard interface (Standard) Serial sending signal by current loop or RS232C with baud rate 600 Transmission distance: Current loop<=100 meters; RS232C<=30 meters 17. Communication interface (RS232 C standard; RS422 optional) Serial communication interface, with selectable baud rate

Weighing indicator A1 + P adopts double integral A / D conversion technology, original from model A1 + , with built in printer, widely applied in electronic platform scale, mechanic-electronic scale and so on alike static weighing system equipped with 1~4 load cell. ------------------------------------- Technical Parameter: 1. A / D conversion method: Double integral 2. A / D conversion speed: >=5 times / sec. 3. Input signal range: 1mV~24mV 4. Input sensitivity: >=1 UV / e 5. Load cell excitation: DC 12V 6. Max. Connection number of load cell: 4 at 350 ohm 7. Load cell connection mode: 4 wire 8. Verified counts: 3000 9. Division: 1 / 2 / 5 / 10 / 20 / 50 / 100 optional 10. Display: 7 bits LED, 7 status indications 11. Display range: -99990~99990 (d>=10) 12. Clock: software clock, clock data lose on power off 13. Scoreboard interface (Standard) Serial sending signal by current loop with baud rate 600 Transmission distance: <=50 meters 14. Communication interface (RS232 C standard)

------------------------------- Technical Parameter: 1. Measurement interchangeable: N, kgf, lbf 2. Able to record the peak value of both pulling and pushing simultaneity 3. Max Testing Load: 2N, 5N, 10N, 20N, 50N, 100N, 200N, 500N 5. Load Divison Value: 0. 001n, 0. 001n, 0. 005n, 0. 01n, 0. 01n, 0. 05n, 0. 1n, 0. 1n (respectively for above Max testing load range) 6. Load cell installation: Load cell inside or outside 7. Relative Value Error: / -0. 5% ------------------------------- Feature: 1. Testing rapidly and accurately 2. Convenient operation for efficient work. 3. 8 hrs of working time by battery power for a recharge. 4. Function of breaking power automatically, for safety. 5. Alarming for over-load work. --------------------------------

------------------------------- Technical Parameter: 1) Accuracy Class: OIML (III) 2) Taring Capability: 100% 3) Result Steady Display: 3 to 5 seconds 4) Weighing Capacity / Division: 100kgs / 0. 05kg, 200kgs / 011kg, 300kgs / 0. 1kg, 500kgs / 0. 2kg, 1t / 0. 5kg, 2t / 1kg, 3t / 1kg, 5t / 2kg, 10t / 5kg ------------------------------- Feature: 1. Dynamic weighing, Rapid & Accurate display. 2. Two-point calibration, accurate and reliable. 3. Light weight, small cubage & portable to carry. 4. Super-bright LED. 5. Rectification of gravity acceleration, adopt to everywhere all over the world. 6. Turn off automatically after 1. 5 hours no-working. Allocated with remote controller come along with expanding function of holding data, weighing result memory and back-checking. -------------------------------

------------------------------------------- Technical Parameter: 1. Platform Material: superior stainless steel (1. 5mm thickness) 2. Accuracy Class: OIML (III) 3. Operating Temperature: Scale body (including load cell) : -30C ~ 65C Indicator: 0C ~ 40C 4. Relative Humidity: less than 90% 5. Power Supply: AC187 ~ 242, 50Hz Built-in storage battery free of maintenance: 6V / 2. 8ah 6. With function of Tare 7. Model series: * Model No. : TCS-30A Max weight capability (KG) : 30 Division (g) : 10 Platform Size (mm) : 420 x 480 Outline Size (mm) : 600 (L) x 420 (W) x 952 (H) * Model No. : TCS-60A / B Max weight capability (KG) : 60 Division (g) : 20 * Model No. : TCS-150A / B: Max weight capability (KG) : 150 Division (g) : 50 * Model No. : TCS-300A / B: Max weight capability (KG) : 300 Division (g) : 100 * Model No. : TCS-600A / B: Max weight capability (KG) : 600 Division (g) : 200 8. Product Size (A / B) : Platform Size A (mm) : 420 x 480 Platform Size B (mm) : 520 x 620 Outlin

As a novel product, YD serial electronic movable floor scale is characterized with advantages of easy moving, accurate & fast weighing, and nice appearance. The innovative design embodies the concept of humanity and integration. The whole system is composed by deck, hydraulic elevation, rolling wheel, high accuracy load cell and intelligentized weighing indicator F2002. The four support feet of platform are adjustable to make sure weighing system works accurately when weighing. When the scale need to be moved to other place, just adjust the hydraulic elevation to make the rolling wheels fall to ground, and push it to move. The indicator F2002 is fixed in the bracket of vertical column, and it can be turned around by 180 degree, thus make a convenience of reading weighing figure. The product is widely used for weighing work in many fields such as cargo consignment weighing in transportation, prompt weighing at trading locale, instant weighing at fair, and especially helping mine industr

SCS electronic floor scale is used for weighing all sorts of materiel and hand trolley. The scale is placed on level cement ground. It can be used fixedly or be moved to use as well. ------------------------------------------------- The Standard Configuration: 1) 1 set of Scale Body (Including Load Cell, Junction Box, Support Feet) 2) 1 unit of Indicator 3) 1 PC of Communication Cable ------------------------------------------------- Optional Accessories: 1. Manostat Power Supply or UPS (Uninterruptible Power Supply) 2. Drive-on ramp to scale platform 3. 24-DOT-Matrix Printer ------------------------------------------------- Technical Specification: 1. Accuracy Class: OIML (III) 2. Weight Capability Range: 1t, 2t, 3t, 5t, 10t 3. Scale Dimension (L x W) : 1m x 1m, 1. 2m x 1. 2m, 1. 2m x 1. 5m, 1. 5m x 2m 4. Operating Temp Range: * Indicator: -10-40C * Scale Body (including Load Cell) : -30-65C 5. Relative Temp: less than 95% 6. Power Supply: VAC: 220V (-15% -10% ) Frequency (

We would like to tell you we can supply CNG automobile combustion gas pressure gauge (sensors) with large quantity and competitive price. The product is compatible with various types of commercially available adaptors and switchers, such as LOGAS, LOVATO, BIGAS, etc. This pressure gauge is patent product, the patent No. 200520078879.8 Our product has successfully opened the market in India, Iran, Thailand, Italy, and other countries and regions. Welcome to visit our website to get more detailed information, and browse our product online, please contact with me if you are interested in the product!