Power Transmission Equipment

We possessed an expertise at die casting, low pressure casting, permanent mold castings, sand casting made from Alloy-type copper,Aluminum,Zinc and especially heat treat ment of casting, E-coating ,shot blasting, anodized finish and sand blast cleaning of casting,etc Materials: All Types Of Non - Ferrous Castings, Confirming to IS, BS, ASTM, DIN, SAE, Any Other Standards Weight range: 5g-200kg. Piece numbers: Small, medium and large series. Process: San casting,investment casting,die casting,permanent mould casting. Surface treatment: coating, varnishing, passivating, grinding, polishing,anodizing ,etc. Inspection possibilities: Analysis wet chemically or by x-ray spectrometer, 3-coordinate computerised numerical control measuring machine, mechanical values for tensile strength, yield stress, notched bar impact tenacity, x-rays, metallography. Licenses: Lloyds Register of Shipping, Bureau Veritas, TüV, SGS. Quality Control: According to ISO 9

we manufacture all kinds of gearboxes and electric valve actuators.i'll appreciate if you contact me by inquiry!then i'll tell your our homepage.my skype ID is ; wxl911008

YL series sighle phase AC motor (start and running capacitor) Guanglu product YL series signle phase motor from H71-H100, 2 pole and 4 pole motor. As it's with both start and running capacitor, centrifugal switch, it's well accept by our clients for it's strong torque, steady performance, and long life. Guanglu YL series is saled well in Mid-east, mainly for aircompressor facoteries, and also well saled at market

Keep motor dried and clear during using. Motor coved motor for protection when motor used outside.

For SR geared motors, the boxes are cast precisely by high steel material and processed at processing center; the gears are made of high-quality alloy steel, are treated with surface hardening and gear ground ; and the key parts are imported. The whole geared motors are small in volume, with great load-carrying capacity, steady running, low noise and high efficiency. SR geared motors have reached the advance international level, can replace the same kind of products imported. Equipment Method: 1. Foot installment, flange, hollow shaft 2. Various of motors or double shafts can be equipped Technique Parameter: 1. Power: 0.12KW~30KW 2. Torque: 92N.m~6500N.m 3. Ratio: 7.1~11200

Title: 1. Outer former or inner former 2. Outer former: DYW-I model, II model 3. Inner former: FD model wind frozen style DY model oil frozen style JD model oil soaked style TDY midel transmission roller Mounted methods: 1. With or without motor 2. Casting glue, packaging glue, polish surface or cylinder with big waist. 3. Backpressure valve can be equipoped to meet the need of rotation with single direction. Technique Parameters: 1. Power: 0.25 KW~160 KW 2. Transmission Velocity: 0.035 m/s ~ 5 m/s

Planetary Cycloid pinwheel reducer is a speed reducing device taking use of planetary driving principle, engaged by cycloidal pinwheel, with advanced design and novel structure. The reducer can be widely used in the speed reducing mechanism of various driving machines, e.g.: craning, transportation, mining, metallurgy, petrochemical, textile, printing and dyeing, light industry, food, pharmacy, rubber, plastic, packing, beer, road-building, environmental and grain-oil machines, etc. Product: 1. Series of X,B series of parts of machine, Chemical Industrial Department 2. Series of B series of JXJ and series of mini WB Equipment method: 1. Foot installment, flange installment 2. Various of motors or double shafts can be equipped. Technique parameter: 1. Power: 0.04 KW ~ 75 KW 2. Ratio: single-stage 9 ~ 87 double-stage 121 ~ 7569

The reducers include 4 kinds of series: ZDY(single-stage), ZLY(two-stage), ZSY(three-stage), ZFY(four-stage), and 57 kinds of sized, 54 kinds of speed ratios (People's Republic Of China major standard: JB/T8853-2001). They are mainly used in metallurgy, mine, transportation, power, cement, building, chemical, textile and light industry. Features: 1. Compared with the former reducers, the dimensions of hard teethface reducers are decreased by 56%, and the weight are decreased by 40%, but service life are increased by 3~4 times, and carrying capacity are increased by 8~10 times. 2. Housing not inly has compact construction, artistic outline, but also has higher rigidity 3. Main spare parts such as gears, shafts are made if high-strength alloy steel and treated with carburization, quencher, gear grinding. The precision of gear is grade 6. 4. The running efficiency of each stage is 98%~99%. 5. The reducer can be assembled with backstop. Products: ZDY, ZLY, ZSY,

Features: 1. The main parameter, for example, center distance and ratio, are accoring ro R20, and main parts can interchanged between different series. 2. Loading capacity is high. The gears are super alloy steel, carburized, quenched, ground. 3. Small cubage, light weight, high precision, high efficiency, long life and low noise (no more than 85 db) 4. Splash lubrucation. When the thermal power is not enough, please adopt the circular oil lubricate or circular water cooling. Products: 1. Double-stage: DBY model, KBYK model 2. Three-stage: DCY model, DCYK model Equipment: 1. The installment of bottom foot, solid shaft and hollow shaft or connection by contractuoin on plate with 2. Backpressure valve can be equipped to meet the rotation with single direction 3. Big power can be equipped to complete the capacity of heavy bearing Technique parameter: 1. Ratio: double-stage 8 ~ 14 three-stage 16 ~ 50 2. Two kind of

Feartures: NGW-S planetary gera reducers with horizontal right-angle between input and outputshaft, which is characterized by compact dimensions, light weight, easy assembling, high load bearing and good appearance include 2-stage and 3-stage series. (China Machinery Industry Ministry Standard JB3723-84) It is mainly used in metallurgy, mine, hosit, transportation, chemical, building andlight industry.

Feartures: 1. Light weight, small volume, Comparing with common cylindrical gear reducer, the weight of this kind of reducer is 1/2 lower, and volume is 1/2~1/3 less. 2. High driving efficiency, The driving efficiency of 1 stage is up to 0.97, that of two stage is 0.94, that if 3 stage is 0.91. 3. High driving power. Power can be 1 KW ~ 1300 KW. 4. Hard tooth surface is used, and life is long, and it is widely applicable.

Over view 1. Application and performance HZ rotary speed reducer is a new reducer that is highly universal, is mainly for tower craning, also for power rotary part of other equipment. The reducer of this type is one from products derived from planetary speed reducers of our factory, is featured by steady operation, small noise, high driving efficiency and beautiful appearance. 2. Applicable Scope Speed of input shaft:<=1500 rpm Rotating direction: Can be used for run in both positive and negative direction. Working calss: M5 Use grade: T4 Ambient temperature: -40°C-45°C (shall be preheated before starting at an ambient temperature lower than 0°C). 3. Introduction on structure HZ planetary speed reducer combines 1-stage parallel shaft outer engaged gear driving with 2-stage planetary gear driving of hard tooth face, all the main driving parts employs high-quality alloy steel, the teeth are sintered, hardened and ground

Features: Planetary gear speed reducers from SR are compact and light, comparing with shaft-fixed driving cylindrical gear reducers with hard tooth surfaces, the weight is 1/2~1/3 lower, and volume is 1/2~1/3 less. It is of hgih friving efficiency, bearing capacity and driving power. The ourline shapes are varied, and they will run steadily and at low noise. It employs high-quality Alloy steel that is hardened and nitrided, so it is of better performance. Products: 1. NAD/NAF model, NBD/NBF model, NCD/NCF model, NASD/NASF model 2. NBSD/NBSF model, NCSD/NCSF model Equipment method: 1. Foor installment, flange installment 2. Big power can be wquipped to compalete the capacity of heavy bearing Technique parameter: 1. Torque: 1400 N.m~2987000 N.m 2. Rario: 112~1250

Features: 1. Optimizing design is made on the gears for hard-tooth-faced speed reducers in the national standard, and the actual bearing capability of some speed reducers is improved. 2. The box-type design has broken through the thinking model in which the hard-tooth-faced speed reducers are led by curves in the national standard, and has introduced a shape of polygon led by straight lines. 3. The polygon boxes can be mounted in any way and are adaptive widely 4. Small volume, light weight, low noise, high efficiency and long service life. Technique parameter: 1. Power: 2.4 KW ~ 6730 KW 2. Ratio: 1.25 ~ 500

Features: 1. Optimizing design is made on the gears for hard-tooth-faced speed reducers in the national standard, and the actual bearing capability of some speed reducers is improved. 2. The box-type design has broken through the thinking model in which the hard-tooth-faced speed reducers are led by curves in the national standard, and has introduced a shape of polygon led by straight lines. 3. The polygon boxes can be mounted in any way and are adaptive widely 4. Small volume, light weight, low noise, high efficiency and long service life. Technique parameter: 1. Power: 2.8 KW ~ 2750 KW 2. Ratio: 8 ~ 355

For SR geared motors, the boxes are cast precisely by high steel material and processed at processing center; the gears are made of high-quality alloy steel, are treated with surface hardening and gear ground; and the key parts are imported. The whole geared motors are small in volume, with great load-carrying capacity, steady running, low noise and high efficiency. SR geared motors have reached the advance level, can replace the same kind of products omported, and can be used widely in large fields. Equipment method: 1. Foot installment, flange, hollow shaft 2. Various of motors or double shafts can be equipped Technique parameter: 1. Power: 0.12 KW~200 KW 2. Torque: 200 N.m~18000 N.m 3. Ratio: 4~31500

For SR geared moors, the boxes are cast prcisely by high stell material and pricesed at processing center; the gears are made of high-quality alloy steel, are treated with surface hardening and gear ground; and the key parts are imported. The whole geraed motors are small in volume, with great load-carrying capacity, steady running, low noise and high efficiency. SR geared motor have reached the advance level, can replace the same kind of products imported. Equipment method: 1. Various motors can be equipped 2. Direct connection motor or double-shaft motor 3. Foot installment or flange installment Technique parameter: 1. Power: 0.12 KW~200 KW 2. Torque: 200 N.m~50000 N.m 3. Ratio: 5~33000

For SR geared motors, the boxes are cast precisely by high steel material and processed at pricessing center; the gears are made of high-quality alloy steel, are treated with surface hardening and gear ground; and the key parts are imported. The whole geared motors are small in volume, with great load-carrying capacity, steady running, low noise and high efficiency. SR geared motors have reached the advance international level, can replace the same kind of products imported. Equipment method: 1. Foot installment, flange installment 2. Various of motors or double shafts can be equipped Technique parameter: 1. Power: 0.12 KW~160 KW 2. Torque: 85 N.m~18000 N.m 3. Ratio: 1.4~28000

SR Box Worm Reducer in Aluminum Alloy is made by Starred-River with European technology. Its structure, outline and installation dimensions as well as preformance are same with that of European products, they are interchangeable, and the materials and machining process are advanced internationally. The product is featured by: 1. Low noise and temperature rise. 2. High bearing capability, smooth running and long service life. 3. Compact structure, small volume, light weight, beautiful shape and easy to install. 4. Can run continuously under server environment, and has a good reliability. SR reducers can be widely used for speed-reducing driving for various machines in petrochemical industry, tobacco machinery, grain, oil, food and forage machinery, light industry, textile, surger refining, pharmacy, leather industry, environmental and traffic & transportation, etc., they are the speed reducers that are used the most used the most widely at present in various productio

SR Box Worm Reducer in Aluminum Alloy is made by Starred-River with European technology. Its structure, outline and installation dimensions as well as preformance are same with that of European products, they are interchangeable, and the materials and machining process are advanced internationally. The product is featured by: 1. Low noise and temperature rise. 2. High bearing capability, smooth running and long service life. 3. Compact structure, small volume, light weight, beautiful shape and easy to install. 4. Can run continuously under server environment, and has a good reliability. SR reducers can be widely used for speed-reducing driving for various machines in petrochemical industry, tobacco machinery, grain, oil, food and forage machinery, light industry, textile, surger refining, pharmacy, leather industry, environmental and traffic & transportation, etc., they are the speed reducers that are used the most used the most widely at present in various productio