Refrigeration and Heat Exchange

Date of manufacture is 2001. Equipment has NOT been used. Like new. Condenser type is KEF-107 Condenser E. Ready for shipment.

This provenshell & tube heat exchanger offers the cost effectiveness that comes with having a highly standard design, while easily providing for various options to meet specific customer requirements.

Wide range of Heat Exchangers are offered by Ti from highly corrosion-resistant special materials (Titanium, Tantalum, Ti-Pd, Nickel, Hastelloy B & C, Niobium, Zirconium, Inconel, Monel, & its Alloys) for selected applications, manufactured in house from traceble metals, are precision made to a usual standards upto ASME. Given mentioned photographs shows Ti's efficiency and experience. Range Shell Diameter : upto 2 mtrs. Tube Diameter : upto 50.8 mm Tube Sheet Thick : max 100mm Tube Sheet Type : Solid / Claded Plate Length : upto 8 mtrs. 'U' Tubes : upto 8 mtrs Design Code ASME & TEMA Test a) Pressure Shell Side : max. 50.0 Kg/cm^2 Tube Side : max. 50.0 Kg/cm^2 b) Non Destructive Testing Radiographic Test Unit (Gamma & X-Ray) Ultrasonic Flaw Detector Magnetic Particle Crack Detector Liquid/Dyepenetrant Test Facility. Inspection & QA 1. ISO 9001 : 2000 2. Lloyds Register 3. Humbherys & Glasgow 4. Devi Power Gas 5. Inspectorate India

Wide ranges of Heating / Cooling coils and Exchangers are offered by Ti from highly corrosion-resistant special materials for selective applications, manufactured in-house from traceable metals, are precision made to the usual standards up to ASME. Given mentioned photographs shows our efficiency and experience. MATERIAL OF CONSTRUCTION We offers the Coils from variety of metals, like... 1. Titanium, Tantalum, Niobium, Zirconium & their alloys. 2. Nickel & its alloy like Hastelloy 'C' & 'B', C4, 2000, Monel, Inconel & Copper. SS 304, 316, 321 & Duplex. 3. Oxide layer provision to prevent the crevice corrosion. FEATURES 1. Custom Design 2. ASME IX Coded welding 3. NACE Stress relieving facilities. 4. ERW / Seamless / Fabricated Pipe 5. Traceable metals from single roof 6. Computerised Corrosion database. 7. Pneumatic test up to 8kg/cm2 for two hours. 8. Dyepenetrant and Radiography test as required. OPTIONS 1. Heavy or Light wall thick. 2. Pipe OD fro

We are an aluminium extruder with more than a decade of experience supplying the automotive, building and construction, electrical and electronics, furniture, advertising and exhibition. With a factory area of about 40,000 square meter, we are equipped with all facilities needed in the aluminium extrusion industry, namely, in-house die shop, horizontal anodizing plant, fully automatic powder coating and fluorocarbon coating plant. With long years of experience together with state-of-the-art facilities, Schimmer Metal Standard guarantees to serve our customers with the finest aluminium extrusions.

homore,refrigerating machinery : semi-hermetic of water-cooling parallel generator?water-cooling condenser?evaporator?refrigeration fittings?cooling water tower and water pump?cooling water pipe and valve?refrigeration pipe and heat preservation and so on. HOMORE Co. is one of huge leading engieneering companies in China that has high tech products and lines and cares much about best installation, best after-sales tech service, etc.

Installed centrifugal fans, PTC as the heating material Electronic as the heating way Safety, heating exchange higher, electronic-saving Be suited for hotel, restaurant and so on.

Mounted with centrifugal or axial-flow fans and hot water, steam as heating media, it saves large energy. Uniform wind flow speed, easy installing, convenient repair, which are the better choice for you.

Efficient heat exchange area of single plate: 0.15-1.60m² Rated Max flow: 1060m³/h Material: SUS 316L or 304 stainless steel, TA1 industrial pure titanium, Hastelloy C-276, RS-2SMO254, Inconel, Monel Thickness of plate: 0.5, 0.6mm Max plate number: 310 Max rated pressure: 2.0 Mpa Rated temp: -20 - 200ºC Connection Size: DN50-DN250 Max assemble area: 480m² The product accords with the standard of GB16409-1996 in Heat Exchanger of the Plate Type, and JB. 8701-1998 in Heat-exchanger of the Plate Type for Refrigeration. As all these features we recommend our product: - High heat transfer efficiency - Compact structure and light weight - Easy to repair and clean - Easy to adjust surface or arrange plate - Low fouling factor

Making good use of far infrared ray, It can avoid heat-exchange flows that may result in floating dust within the air, which is healthy and comfortable for body. Safe, non-pollution, easy installing, fast heating speed, saving energy with efficiency

It is made of axial-flow fans, unit heating and mobile bracket, which can effectively increase the temperature of the atmosphere to ensure the comfort of the workers and machines. Reasonable construction, small volume, light weight, flexible, adjusting the temperature effectively.

Centrifugal fans and axial-flow fans as the heating way Electronic, steam and water as the heating media Reasonable construction, easy installing Be suited for warehouse, industrial enterprise and etc.

Perfect appearance, uniform wind PTC as the heating media Electronic as the heating way Higher heating exchange, durable working, lower voltage influence

According to the different heating media there are three types of centrifugal heated air curtains, respectively electronic heated products, hot water heated products, steam products. As equipped with centrifugal fans, they can obtain higher air flow speed and more wind pressure than cross-flow air doors. They are effective for sealing, especially suited for the large garage, store, warehouse and entryway. At the same time we can produce various non-conventional type air curtains based on the need.

Separating different climate zones by an invisible curtain of air gives large energy savings and a comfortable indoor climate. Various types of cross-flow air curtain depend on different functions, such as cross flow air curtain, cross flow heated air curtain. However in order to adapt to different heating media, there are electronically air curtain, hot water air curtain, steam heated air curtain. Perfect designs meet your all kinds of demands.

Function: It is mainly used to the pre-heating process before moulding of thermoset materials, such as melamine, urea, epikote, hydroxybenzene and melamine. It improves the liquidity of materials, and, decreases harmful ingredient and increases the glossiness of the product surface. The machine can be used with the melamine machine together. Feature: 1. Introduce advanced technology from Japan. World famous brands are adopted for the overall unit. Thus the performance is guaranteed. 2. Full automatic hood structure requires no air supply. Accurate switching is ensured. 3. Modification is very convenient; only one press is required for the operation. 4. Safety protection - multi-protection measures are taken to ensure the man/machine safety

Used to cool the beverage or food drinks with variety uses For more please visit our web; www.snowkey.com or write to me directly : Jeson at snowkey.com My name is Jeson

We are specializing in the manufacture and export of soft ice cream machines, hard ice cream machine, stirring ice machine, slush machine and ice cream cone machine. The specification of slush machine are as follows, kindly contact us if you are interested, we shall send you detailed catalog together with the goods' photos! Model No: G10L2 Detailed Product Description Features: 1) Main power: 220V 50Hz 2) Rated output: 1.1kW 3) Refrigerant: R22 (R134A) 4) Magnetic drive 5) Frank freezing system 6) Inner and outer stirring system 7) 2 in 1 (freezing water machine and slush freezer) Packing: Dimensions: 360 x 480 x 700mm N.W.: 40kg G.W.: 43kg

We are specializing in the manufacture and export of ice cream machine, stirring ice machine and ice cream cone machine. Additional Description The specification of ice cream cone machine are as follows, kindly contact us if you are interested, we shall send you detailed catalog together with the goods' photos! QT-60 Ice Cream Cone Machine Production: 1000-1800pcs/h Heating: electric heating Rated power: 24.3KW The mold opens to shut from: air Supply feeding material mode: semiautomatic Bake production per: 60 pcs Bake time: 1-2 min Machine dimensions:1700x1000x1800(mm) Net weight:1040kgs ST-30 Ice Cream Cone Machine Production: 500-900pcs/h Heating: electric heating Rated power: 14KW The mold opens to shut from: manual Supply feeding material mode: semiautomatic Bake production per: 30 pcs Bake time: 1-2 min Machine dimensions:1400x1000x1500(mm) Net weight:570kg DST-10 Ice Cream Cone Machine Production: 200-300pcs/h Heating: electric heating Rated

We are specializing in the manufacture and export of soft ice cream machines, hard ice cream machine, stirring ice machine and ice cream cone machine. The specification of hard ice cream machines are as follows, kindly contact us if you are interested, we shall send you detailed catalog together with the goods' photos! Detailed Product Description Features: 1) Compressor: Aspera from Italy 2) Expansion valve: Danfoss from Denmark 3) Pre-cooling system: pre-cooling the flavors before start produce ice cream 5) Digital indicator: shows the temperature and the progress of the product Specifications: BQL-H18S Hard Ice Cream Machine Specification: 1). Rate Voltage: 110V/220V 50Hz/60Hz 2). Rate Power: 1.7kw 3).Tank capacity: 9L 4).Condenser: Air 5).Refrigerant: R22 6).Output: 28-38L/h (22-28Kg/h) 7).Overall Dimensions: 770*540*1520mm 8).Outer Packing Wooden Boxes Packing Dimension: 900*700*1570mm Net Weight: 138