Welding and Solders

LK-K965 Melter Glue Gun Feature: 1,Raising the temperature rapidly, it can work normally in 3 minutes. 2,Automatic regulated temperature design is fit for EVA plastic strips. Just adjust the temperature to the certain Celsius systemto control the stickiness of the plastic solvent. So, it is used for Polyamide strips to stick to the electronic parts. 3,Effective and energy-saving working way makes the plastic guns work continuously without decreasing the temperature. 4,The temperature button can control within 1000 Celsius system-2000 Celsius system.

LK1502DD DC Power Supply LK1502DD is precise direct currency, it can adjust the currency from 0.6A to the standard value through cut circuit.It works very quickly to save the short circuit from power and its load and overload of currency. This power can specially provide 5 voltage outputs for cell phones and BB pager (?5V ?6V ?8V 6V 7.2V).This power is accurate, stable, and it is good for the research and development of some technogical products and laboratories, electrical production lines etc.

LK862 Infrared SMD rework station 1,LK862 with 5 functions: infrared weld, melt preheater system, Lead free solder, Operating Lighting and magnetic rail shelf. 2,It breakthroughs the defects that the traditional hot air SMD rework stations cover the part, and when it heats up, the heat will destoy the parts. 3,It utilizes the international advanced infrared reworking and soldering technology: use infrared to heat up evenly the parts with the sharp radiation. 4,It can rework and solder all the parts with the length of 15-35cm directly. 5,It installs 600W placstic heating system with the coverage of 120x120mm. Magnetic PCB holders are attached to make it convenient and practical. 6,Infrared heats up without air flow, so it does not affect the other parts around. It adapts to all the parts, especially to BGA, SMD parts. 7,The non-lead soldering station utilizes Japan white light heating cores with long life span, efficient heating.

LK878AD Brushless Fan Rework Station Characteristics: 1,Brushless Fan with long lifetime, low noise 2,Hand handle with sensor switch, the system will turn into the working mode while the handle is held; and the system will standby while the handle is put on the holder, which is very convenient for operation.

LK8205AD Rotate The Wind SMD Rework Station Specification: 1,Power:220V AC 2,Power consumption:1200W 3,Capacity:400L/min(max) 4,Hot Air Temperature:100 Celsius system-500 Celsius system

LK878AD Brushless Fan Rework Station 1,Brushless Fan with long lifetime, low noise 2,Hand handle with sensor switch, the system will turn into the working mode while the handle is held; and the system will standby while the handle is put on the holder, which is very convenient for operation.

LK858D Brushless Fan SMD Rework System Specification: Category:LED manifestation of tiny electricity computer figures Power depletion:700W Type of Pump & Airflow: Brushless fan with soft air Amount of Airflow:120L per minute (Max.) Adjustable Temperature Range:100 Celsius system -450 Celsius system Type of Display: Microcomputer Digital LED (Resolution rate;1 Celsius system) Noise:Less than 45dB

LK2018 Portable smart non-lead hot air SMD rework station * patented* It consists of a super blue LCD screen, a microcomputer, 3-way parameter backup and smart sensitive units in the handle.

LK852BD SMD Rework System Specification: Category:LED manifestation of tiny electricity computer figures Power depletion:700W Type of Pump & Airflow:Brushless fan with soft air Amount of Airflow:120L per minute (Max.) Adjustable Temperature Range:100 Celsius system-450 Celsius system Type of Display:Microcomputer Digital LED (Resolution rate;1 Celsius system) Noise:Less than 45dB

LK852D SMD Rework Station Specification: Power Consumption:320W Spirit pump:Diaphragm Breeze deal: less than or equal to 24L/min Temperature:100 Celsius system-500Celsius system

LK-FX950 Non-lead soldering station(lock meter) 1,Creative temperature control organization: use the special key to set the temperature. Only the supervisor can use the key to insert in to change the temperature, this will avoid the operator from changing the set temperature which affects the soldering quality. 2,"Stand-by" function can save power. When the iron is put on the iron holder for 6 minutes, the function of " stand-by" will automatically work, the temperature of the soldering terminal can drop under 200? to decrease the load to avoid the oxidation.

LK943 microcomputer digital lead-free soldering station 1,The microcomputer controls the soldering stand temperature system automatically, going up the temperature with the astonishing velocity. 2,Have the transducer of linear temperature in the soldering stand heat rum body, actual operation in display in plate in LED temperature, use this product keep the view firm. 3,It utilizes the imported heating cores to speed up heating so as to achieve the non-lead soldering. The outlook is also compact and beautiful. 4,Put the cassette temperature isetrol,keep random from changing to move the welding temperature. 5,Establish the province electricity function, sleep status hour soldering mouth temperature auto-as low as 150?. 6,Establish the temperature repairs the positive function ,being the soldering mouth temperature and time temperature contain error, needs the input repairs the just happen, the soldering stand will repair the positive temperature namely.

LK938 Lead-free Soldering Station Characteristic: 1,Controlled By CPU 2,Finger touch type control switch. 3,Anti-static,temperafure rises rapidly,Guaranteed security 4,Separation design,saving space and easy placement Specification : Power consumption:24V/50W Output Voltage:24V AC (Alternate current) Temperature Range:200 Celsius system-480 Celsius system Tip To Ground Resistance:Under 2 Tip To Ground Potential:Under 2mv (typ 0.6mv) Have fever a piece:Ceramic Heater Provided along with the product:Iron handle,Iron holder(with sponge)

top quaity brass body,and triangle stainless tube for strong durability,300mm cutting capablity.

Various sizes of collet, collet bodies, gas lens for TIG welding torches

TIG welding tungsten electrodes are manufactured in Weldstone Group's factory in Zibo China. Pure, Thoriated, Ceriated, Lanthanated, Ziconated tungsten electrodes are available in different dia. range from 0.5mm to 8.0mm and length from 50mm to 175mm.

We are the most leading manufacturer for various sorts of welding and cutting machine in Korea. DC TIG WELDING, TIGER 201 - DIGITAL CONTROL - PLASTIC MOLD CASE - STABLE ARC - VARIOUS PULSE FUNCTION - UNIQUE MOMORY FUNCTION - HIGH DUTY CYCLE

Our XL-ZH-1200 model 3D panel machine features: This 3D panel machine is the main machine of the 3D panel production line, which adopts PLC control system, air cylinder or step motor as drive. The machine can insert, cut, and control the position of the wire mesh and the foamed plastic boards automatically to complete the production of the 3D panel. This production line is of high automatic manufacturing level, productive efficiency, and low lack welding rate, strong welding pressure and even welding strength. The finished products (3D panels) are in good quality and cost low. We have two types of this 3D panel machine: XL-ZH-1200A, XL-ZH-1200B types, so we can fit you according to your demands.

1.Welding torches and parts compatible for Panasonic 180A, 200A, 300A, 350A and 500A OTC 200A, 300A, 350A and 500A Binzel MB-15AK, 23KD, 24KD, 25AK, 26KD, 36KD, 40KD, 401D and 501D Including whole torch, nozzle, contact tip, tip holder, swan neck, handle, rear handle, cable, cable joint and adaptor nut 2.TIG welding guns and parts, such as torch head, back cap, cup gasket, collet, collet body, gas lens body, cable fittings, alumina nozzle, power cable adapters, switch, torch body etc. 3. CO2 Welding guns and spare parts including contact tip, swan neck, tip holder and nozzle, handle, gas diffuser, socket, eurosocket, euro connector, insulator, liner, teflon, etc. especially for exported in OEM. Which can fit for binzel, tweco, panasonic, otc, bernard, Tregaskiss etc. 4. plasma torch & parts, such as electorde tip, shield cup fit for ME, OTC, Panasonic, BINZEL, SAF, ESAB, CEBORA, etc. 5. welding wire for CO2 gas shielded welding (AWS ER70S-6), solder wi

1.Welding torches and parts compatible for Panasonic 180A, 200A, 300A, 350A and 500A OTC 200A, 300A, 350A and 500A Binzel MB-15AK, 23KD, 24KD, 25AK, 26KD, 36KD, 40KD, 401D and 501D Including whole torch, nozzle, contact tip, tip holder, swan neck, handle, rear handle, cable, cable joint and adaptor nut 2.TIG welding guns and parts, such as torch head, back cap, cup gasket, collet, collet body, gas lens body, cable fittings, alumina nozzle, power cable adapters, switch, torch body etc. 3. CO2 Welding guns and spare parts including contact tip, swan neck, tip holder and nozzle, handle, gas diffuser, socket, eurosocket, euro connector, insulator, liner, teflon, etc. especially for exported in OEM. Which can fit for binzel, tweco, panasonic, otc, bernard, Tregaskiss etc. 4. plasma torch & parts, such as electorde tip, shield cup fit for ME, OTC, Panasonic, BINZEL, SAF, ESAB, CEBORA, etc. 5. welding wire for CO2 gas shielded welding (AWS ER70S-6), solder wi