Welding and Solders

features: 1. Easy-holding, high quality, and reasonable design 2. Suitable for all the normal welding machines Technical Specifications: 1.Rated welding current: 200 2.ALoading persisting rate: 60% 3.Suitable diameter of welding wire: 0.8--1.2 Application: Suitable for the semi-automatic welding of MAG, MIG and CO2.

Self contained, portable unit can be wheeled into the tightest corner in the work area for intermittent fumes extraction. 3meters long heat resistant hose supplied along with suction funnel with magnetic base hose mounting device. Light in weight, heavy duty, yet very effective, and efficient. To flush out hazardous and toxic fumes from the work area, when welding, soldering, heat treating etc and transforming it to clean air with the help of inbuilt filter assembly. Very easy to clean, removable filter assembly. With built in filter efficiency dial gauge. Single phase 220Volts-50Hzs, Universal motor is fitted for intermittent operation with minimum maintenance, direct online coil type starter for Auto start/stop features for overload protection, With excellent air flow rate this little machine is a must for enclosed work areas. We also have heavy duty Fumes recovery Units, Its portable and robust, requires 220 Volts-50Hzs. Single phase-1.5HP Continuous rating. Which displaces huge

Auto pipe cutting machine is a lightweight, portable yet a robust chain type pipe cutting machine. It can be used on large field jobs as well as in a small workshop. The machine is designed with special aluminum alloy making it lightweight yet robust. The other parts of machine are of stainless steel and special brass alloy Making it rust free. It is simple and easy to operate. It can cut pipes from minimum 100mm diameter [4 inches] to any larger diameter pipes by quickly changing the length of the chain. It can be operated in clockwise or anti clockwise direction from either side of the machine. It is operated electrically by a wired remote controller. It can cut pipes from 5 mm to 50 mm pipe thickness, by choosing correct nozzles size. The machine can cut bevel up to 45 degree by selecting the required degree on the torch holder of the machine.

Spot & projection welding machine with constant current features, very high quality transformer with "h" class epoxy. To provide you a better welding current and reliability. Model: sp1-10-10 Rated KVA: 100kva Throat dimensions: 200mm X 400mm Max. Short circuit secondary: spot: 35, 000a Max. Short circuit secondary: platen: 45, 000a Rated Max. Input: 354kva Duty cycle: 4% Rated frequency: 50 / 60hz Welding power source: 400v Control unit power source: 100v Max. Electrode force: 1000 kgf Electrode stroke: 60. 20 Electrode tip diameter: 32mm Electrode tip taper: 1 / 10 Tip holder diameter: 25mm Horn diameter: 60mm Cooling water: 8 L / min Weight: 410 KG Come with Constant current controller Model: tns-807v Channel 7 channels Sequence system 2 systems Heating step 2 steps Sequence step 6 steps Heating time-1 / -2 0-99 cycles Other step time set 0 (2) -99 cycles Pulsation control 0-99 times Current up-slope 0-29 cycles Current controls welding current (secondary) 2. 0-49. 9ka Current ran

New technology of our manufacturing, we provide you our new intergrated transformer gun. With very easy rotation movement, even if can be use as up-side down. Rated KVA: 23 KVA ~ 105 KVA Come with Constants Current Controller. E-mail to us for more information.

Cryolite na3 al f6 Fluorine (f) 45,28% Aluminum (al) 23,00% Sodium (na) 29,00% Silicium dioxide (sio2) 0,12% Ferrous oxide (fe2o3) 0,15% Sulfate (so4) 7,00% Humidity 2,59% Carbon (c) 0,48% Bath ratio 2,87% This product is of high quality what can be proved by several years of loyality of leading aluminium producers, such as rusal and other russian smelters. We cordially invite primary aluminium producers, non-ferrous smelters and their suppliers for long-term relationships!

Fluxes, inorganic salt, welding and solder creams for soft soldering Our company is a Russian producer of fluxes: For all aluminum alloys with contents a magnesium before 1% For alloys a contents a magnesium more 1% For primary aluminum For titanium alloys For magnesium alloys Universal (refining and modifying) fluxes and ligatures for system alloys al-si. Flux and technology for refining the zinc alloys. Technology of refining zinc from the ferric. (technology allows raising output-refining zinc before 97%) Flux and technology for refining the copper alloys. Metallurgical units and auxiliary material. These products is of excellent quality what can be proved by long-term loyalty of leading Russian aluminum producers, who have been using our fluxes in their manufacturing process for several years already. If you are interested in getting more detailed information, please do not hesitate to contact me

We are a manufacture with a near 20years working history, produc all kinds of welding wire(copper, mig, tig), welding electrode, wire rod(swry11/h08a),80% of our product are exported throughout the world, we hope to receive your kindly inquiry.

Wave soldering system - pc(personal computer) controlled - ir heater/air convection - dual wave nozzle(1st turbulent and 2nd smooth) - PCB 400w available(up to 500w option) - foam fluxer or spray fluxer - preheat 3 zone - 1.5m length - chiller cooling unit(option)

1. CE approved. 2. Dual power 30w or 50w. 3. LED timer countdown. 4. Auto stop 99 sec cycle. 5. Durable stainless steel container and cover. 6. Easy to check the operation by see through cover. 7. Suitable for cleaning invisible dirt, dust and greasy dirt in untouchable area, eg glasses, bracelet, denture, mainboard, ic, etc. 8. Suitable for household appliance, optical shop, repair shop, etc. Packing:21x16x13cm G. Weight:1kg

1. Multifunction for measurement of frequency, period, crystal and caulculation function. 2. Light touch control and key tone function, 3.13mhz function. Packing:30x25x15cm G. Weight:2.5kg * above specifications maybe varied without prior notice.

Model: SUNKKO 942 + Name: Intelligent Leadfree Soldering Station ==FUNCTION== 1. Super speed on heat recovery and widely applied for multi-layer boards and regular uses. 2. Temperature display and calibrating and setting 200~450 oC. 3. High stability: Intelligent thermostat + / -5% and super power 75W max. 4. High safety: Auto power cut-off when self-test system failure or standby for long time, and applied 24V heater low voltage supply. 5. Time setting 1~9 hours and press any key returns to normal. It achieves energy save, pay less attention and prolongs life of heater and tip. 6. Temperature lock protects setting value and avoids change by mistake. 7. Split type heater and tip decreases the cost of consumables. All 942 + tips series are interchangeable and available for sale. Option Compatible Soldering Pens: 1. Complex type with heater and tip. (Model 912) 2. Split type tip with Imported ceramic heater. (Model 907) 3. Split type tip with China ceramic heater. (Model 9

Spawmet is a producer of welding electrodes. In our offer you can find the electrodes for: Welding low-alloy steels and low-carbon steels, Welding stainless steels, Hardfacing, Welding wires. The quality of our products is also aproved by the following classification societes: Udt - technical supervision office, Tuv - technischer uberwachnungs verein, Prs - polish register of shipping, Gl - germanischer lloyd. Dnv - det norske veritas

Great automatism welded machine is the most advanced welded equipment which is combine electron and computer. The most merit is the organzine can be ajusted. The machine can produce the exactly aperture according to the computer data that you have input. If you want to change the mesh distance, you can change the computer data that you have input. That is to say, the mesh can be changed anytime The mesh of the machine produce is plain, the diagonal error is small, it has been assessed it is the most advanced weld equipment by the wire mesh expert. You can order advance if you need the machine that over 2.5m and over the diameter is 6mm. 1 The most width is 2.5m 2 The weld diameter is 2.5mm-6mm 3 The welding transformer air can be cold itself 4 The form of welding is impact one time and weld one by one 5 It adopt cycle control when weld, reduce the electrical mesh pollution 6 The weld pressure can be adjusted 7 The organzine can be changed 8 The woof can be changed automaticaly accordin

Characteristic: It has the board machine frame,electromagnetism stepless time,the distance of wire is wide, small noise,stabilization and save electricity, the mesh is standard. The machine can be used to produce f0.45-f1.0mm low carbon steel wire, stainless steel wire mesh and other kinds of welded wire mesh. AH-L-W4 Characteristic: stability, lowness noise,draw straight and send wire automatically. It can weld the1/2-4wire mesh.

Tig mma cut machine Model: Ct416 Function: Tig/mma/cut Input power voltage frequency:220+-10%. V50/60hz Rate input power capacity:5kva Rate input power:13.7/21.7/25.7 Output current range:15-160/15-150/20-40a Rated output voltage:16/27/100v Duty cycle:40% No-load loss:40w Arc-sarting: Hf/touch/touch Efficiency:85% Power factor:0.93 Weight:15kg Overall dimension:425x205x355mm Inner diametor of burner:1.2 Air pressure:0.4mpa Rate of flow:2-5l/min 80l/min Max diameter of rod:3.2 mm Max cutting thickness:1-12mm

Model: cut-30 Function: air plasma cutter Input power voltage: 220 + -10% v Rate input power capacity: 4kva Rated output voltage: 100 Rate duty cycle: 60% No-load loss: 230 Current range: 10-30a Efficiency: 85% Power factor: 0. 93 Insulation class: b Protection class of case: ip21 Weight: 8kg Overall dimension: 371x155x295mm

TIG-200, Argon welding, include full accessories.

MMA-85 include plastic case and full accessories

Leister Uniplan E is an automatic welding machine ideal for industrial fabrics like tarpaulins. Its digital display shows set and actual values of temperature and welding speed. Leister Uniplan S does the same job without the convenience of a digital display. Both are available in 20mm and 30mm welding seam widths.