Triple Output * DUAL Voltage, Ampere: DC+30V/3A, DC-30V/3A. * Fixed Voltage, Ampere: DC 5V/2A. Output: ON / OFF Control Key Lock: Key Lock to Avoid Error Operation Protection: Overload Voltage, Ampere Protection: (SMPS) Protect over heat and Overload CC, CV Set: AUTO Set Tracking: AUTO Tracking 14bit Programming and the voltage, the read back of the current. Programming that can do up and down fast. High Efficiency and High Power Density Standard Commands for Programmable Instruments (SCPI). Setup: Setting and functions may be selected and stored in memory from the front panel. Eight setups may be stored in memory. Equipment: Displays information about your instrument including the Model number, serial number, Calibration date, GP-IB address and Firmware revision. Remote Control: Function and ranges may be controlled from a PC via the RS232 or the optional GP-IB interface. Display: 128 by 64 pixel Super Twisted LCD display Power Source: May be used with any line vo

Programmable Record (MAX / MIN): Records and displays the MAX and MIN values of the input freq. Programmable Relative (REF / ERR): Displays Reference frequency and the deviation of the measured frequency from the reference frequency as a % error. Programmable Compare (GO-NOGO): The LCD will display PASS if the input frequency is with in the HI/LO limits, LO if the frequency is lower than the LO limit and HI if the frequency is higher than the HI limit. Frequency range: CHA, B: 120MHz Measurement: FRQ. A, FRQ. B, Time interval, Totalize, Ratio A/B, Difference Freq. (A-B), Duty cycle and RPM Resolution: 7 Digits Range: Full Auto Range Trend Plot: The REF is the centerline value on the trend graph, H/Div is the X axis (time) and V/DIV is the Y axis (amplitude). Setup: Setting and functions may be selected and stored in memory from the front panel. Eight setups may be stored in memory. Equipment: Displays information about your instrument including the Model number, serial number,

Programmable Record (MAX / MIN): Records and displays the MAX and MIN values of the input freq. Programmable Relative (REF / ERR): Displays Reference frequency and the deviation of the measured frequency from the reference frequency as a % error. Programmable Compare (GO-NOGO): The LCD will display PASS if the input frequency is with in the HI/LO limits, LO if the frequency is lower than the LO limit and HI if the frequency is higher than the HI limit. Frequency range: CHC: 2.4GHz (CHA: 120MHz) Measurement: FRQ. A, FRQ. C, Time interval, Totalize, Duty cycle and RPM Resolution: 7 Digits Range: Full Auto Range Trend Plot: The REF is the centerline value on the trend graph, H/Div is the X axis (time) and V/DIV is the Y axis (amplitude). Setup: Setting and functions may be selected and stored in memory from the front panel. Eight setups may be stored in memory. Equipment: Displays information about your instrument including the Model number, serial number, Calibration date, GP-IB

Triple Output * DUAL Voltage, Ampere: DC+30V/3A, DC-30V/3A. * Fixed Voltage, Ampere: DC 5V/2A. Output: ON / OFF Control Key Lock: Key Lock to Avoid Error Operation Protection: Overload Voltage, Ampere Protection: (SMPS) Protect over heat and Overload CC, CV Set: AUTO Set Tracking: AUTO Tracking 14bit Programming and the voltage, the read back of the current. Programming that can do up and down fast. High Efficiency and High Power Density Standard Commands for Programmable Instruments (SCPI). Setup: Setting and functions may be selected and stored in memory from the front panel. Eight setups may be stored in memory. Equipment: Displays information about your instrument including the Model number, serial number, Calibration date, GP-IB address and Firmware revision. Remote Control: Function and ranges may be controlled from a PC via the RS232 or the optional GP-IB interface. Display: 128 by 64 pixel Super Twisted LCD display Power Source: May be used with any line vo

Dual Channel and Auto Calibration. DC to 1MHz Oscilloscope band width Sampling Time * Dual CH mode: 25 Ms/S * Single CH mode: 50 Ms/S Automatic Triggering. Automatic setting for horizontal and vertical division Roll and Single shot mode Excellent internal noise reduction Real time Update and Auto ranging. 45 shot reference waveform and setup memories (45 shot wave form) Built-in auto ranging True-RMS digital multi-meter Data hold and run mode. Extra Bright Back light display Low battery indication. Max. Voltage between any Input and Ground: DC or AC 600Vpeak RS-232 interfaces for transferring measurement data and waveform. Display Type: Super-Twist 132 x 128 pixels Designed to comply with safety standard for UL3111, CSA C22.2 No.1010-1 Technical Specification Oscilloscope Function Horizontal Sample Rate 25 Meg-samples per second (Dual CH mode) 50 Meg-samples per second (Single CH mode) Record Length 512 in single shot and glitch capture mode 256 in all other