1.LD11 Series indicator Character is tics 1)The series products take LED chips as luminaire with lower consumption of energy high brig-htness but lower temperature and longservice life To take XD5,220V just one example,its power cons-umption 20.86 Watt,powerconsumption of indicator light s A type and Btype new ly developed by us is just 2.7 Watt for voltage dropped by ressistor and 0.59 Wattfor voltage-dropped by capacitor . It can save 145 KWH for voltage-dropped by resistor every year on the basis of 8000 working hours and 162 KWH for volrage-dropped by capacltor. Espe cially, indicator lights of voltage-dropp ed by capacitor not only save energy, but also improve power factor of supply lines. 2)Broad voltage of power supply: It can work normally within the extent of 20% of rated voltage. 3)It can bear vibration and impact and impact and work properly in the vibration of 10-2000Hz 1.5mm 10g sine frequ-ercy, which solves the prblem of breakeble turgster filament and high co

CDCK8 AC contactor Applicable Range CDCK8 AC contactor (hereinafter called contactor) is designed for circuit of AC 50Hz or 60Hz, rated operating voltage 220V,rated operating current 30A, used to make and break the circuit in motor of refrigeration compressor. Applicable standard National Standard : GB 14048.4 GB 17885 International Standard: IEC 60947-4-1 IEC 1095 CDC3Series AC Contactor Applicable Range CDC3-9--110 AC contactor is designed for long-distance making and breaking in circuit, with AC50Hz (or 60Hz), rated operating voltage up to 660V. When rated operating voltage is 380V in Category AC-3,rated operating current to the power system is up to 110V .It also can be formed with thermal overload relay or electrical protection apparatus and form electromagnetic starter to protect circuit against overload. Applicable Standards National Standards: GB14048. 4 National Standards: IEC 60947-4-1 CDC17 Series AC Contactor Applic

BSMJ series self-healing LV Shunt capacitors.It is used in an AC power system with rated voltage less than 1.2kV to increase power factor to reduce reative loss and to improve voltage quality. Main Features a. Novel in structure,light in weight It is produced with Zinc-and-aluminum metallized polypropylene film as the medium so the dimension and the weight is respectively only the 1/4 and 1/5 of the old. b. Low loss Because the actual value is less then 0.12%,energy loss of the capacitor itself is few,the raised temperature is low,operation life is long and it has outstanding saving energy result. c. Good self-healing performance Medium partial impulse caused by the over voltage can healed by itself to operate as before. d. Safety It is very reliable because the discharge and insurance devies are installed in it. e. No omitted oil Its main immersed agent is the micro-crystal wax,which is solid at normal temperature,its drop-pot and dissoluble-pot are both above 70

Temperature indicating controller-2 Temperature indicating controller-5 Temperature indicating controller-6 Temperature indicating controller-7 Temperature indicating controller-1 Temperature indicating controller-3 Temperature indicating controller-4