|
|
Zhejiang Wanma Group Electron Co., Ltd.
|
|
|
|
|
 |
 |
| | |  [2008-09-03] Features. Quiet operation to minimize neighborhood disturbance. High capacity cabinet. Easy accessibility (front/rear) manipulation. Air to Air heat exchange to efficiently remove waste heat. 19" standard equipment bay mounting. Double skin design, cabinet within a cabinet, to fully protect your electronics. Minimize solar heat gain. Dual equipment bay. Dual doors design (front and rear) for equipment compartment to ease install ease maintain. ALMG3 2mm enclosure, roof and side panels. Stainless steel 1.5mm inner frame for secure and simplified installation. Galvanized steel hot dipped 5mm base. Separate MDF compartment restricts cable contactor access. Separate Heat exchange compartment. Large battery bay | | | | | [2008-09-03] Features:1.Available for 19-inch components.2.Material: sheet steel 2.0mm /3.0 mm according to cutomer's requirement.3.19-inch open rack is ok with 15U,18U,21U,24U,36U according to the customer's requirement. Telecommunications >> Fiber Optic Equipment | | | | | [2008-09-03] Features:1)12-pair fiber optic connection module2)With grey molded base and a small dust cover on the splicing area3)Designed only for splicing4)Pre-formed radiuses maintain bend requirements 5)In-line splice capacity 6)Total front operation Telecommunications >> Fiber Optic Equipment | | | | | [2008-09-03] Features: 1) It meets the trade standards of the Optical Connector, as TIV/EIV-568-A (CSA T529-95) and IEC 874-1. It is used in the Optical Connection2) It adopts qualitative material of low insertion loss and low reflect, which possesses approved optical performance. And it can be mounted simply with the coarse and compact connector pin. Its enhanced and tensile design raises the mechanic stability3) It is provided all kinds of Optical connector of single-mode and multi-mode as SC, ST, FC, LC and MU Telecommunications >> Fiber Optic Equipment | | | | | [2008-09-03] Features:1) Adopts popular 19" cabinet2) 72-port splicing and distribution module3) Stable equipments for fixing, stripping and grounding of the optical fibers4) Suitable for ribbon and non-ribbon optical fibers5) Suitable for installation of FC, SC and ST adaptors 6) Optical fibers, fiber optic pigtails and jumpers are separate, without disturbing each other7) Preferable capacity: 504, 576, 648 and 720 ports are optional 8) Besides, due to its modular design, any capacity can be reached at your preference9) MPX129 ODF acts as interface, in fixed or mobile networks, between the exchange and the transmission equipment. MPX129 consists of splicing and distribution module and the frame itself Technical specification:1) Connectors loss ≤0.5dB 2) Return loss: FC/P C ≥40dB, FC/UPC≥50dB, FC/APC≥60dB3) Connector life span ≥1,000 times 4) Insulation resistance ≥1,000M 500V(DC)5) Dielectric strength ≥3,000V (DC) /min, no spark-over and no flying arc Telecommunications >> Fiber Optic Equipment | |
|
|
|
|
|
|
 |
|
|
|
|
|