FDP-165 HYDRAULIC DIRECTIONAL DRILLING RIG

FDP-60 HYDRAULIC DIRECTIONAL DRILLING RIGSPECIFICATIONSPower of drill (diesel engine)225KWMax push capacity610KNMax pull capacity610KNRated torque27000N.m (45r/min)13500N.m (90r/min)Rated speed0-45r/min0-90r/minFeeding stroke6mDiameter of guide holeΦ240 mmDrilling angle8-16°Move modePropelled with track assembliesWeight 22000 kgDimensions (L×W×H)9000×2750×2800 mmMud pumpMud pump TypeBWF-600

FDP-32 HYDRAULIC DIRECTIONAL DRILLING RIGThe FDP-32 is a full Hydraulic Directional Drilling Rig self-propelled with rubber crawler belts, with advanced and compact structure; and with high efficiency, low oil temperature. All main hydraulic components are selected and adopted from famous-brand products as auxiliary equipments. With movable mast, the rig is guaranteed to drill within the full angle scope and it is in good stability with graceful structure.l Main auxiliary equipments, such as, diesel engine, hydraulic pumps, valves motors, reducer and key hydraulic components all selected and adopted from famous-brand products; l Adopting low-emission and low noise of diesel engine, the rig is more suitable to be applied for performance in the city;l Adopting advanced control system, the power consumption is reduced to the lowest level under non-loaded operation condition;l Equipped with wireless directional guide device, it is to operate;l The mud pump is driven hydraulically with mech

  The FDP-15DA is a kind of Directional Drilling Rig with hydraulic rotator. Mainly used for the projects of underground utilities laying. The rig can drill through ground buildings or underground installation (such as highways, railways, rivers, buildings and or other underground installation, etc.). The rig could be widely used for laying of protective casing for optical fiber cables, communication cables, water supplying pipes and sewer, etc. in cities. The mainly characteristics are high precision of laying position; long distance laying. The advantages over the trenchless method are convincing: high efficiency, low cost, and less impact on the environment.

The XY-42T core drill rig, combining rig with derrick into one unit, is a kind of drilling equipment integrated the drill rig and mast-type derrick, with the function of hydraulic lifting and lowering of derrick. The rig is simple in structure, reasonable in design, light in weight, easy to operate; it has a wide range adjusting angle. It is especially suitable for drilling of hole with great slope angle.The Main Parameter of Drill RigMax. Torque3.2KN·MSpindle Stroke600 mmI.D. of Spindle92 mmMax. Lifting Capacity of Spindle80 KNMax. Pressure of Spindle60 KNMax. Hoisting Power30 KNPower of Motor30 KWThe Parameter of MastHeight10 MetersArea of Base 4×4 M2Area of Top Level0.46×0.52 M2Number of Pulley5 or 3 piecesMax. Load of Derrick100 KNLoad of Movable Operation Platform800 NAdjusting Angle of Derrick45-90

With combination of the characteristics and advantages of various core rigs at home and abroad, the HXY-6/6B is an improved full hydraulic core drilling rig with larger drilling capacity designed and manufactured by Lianyungang Huanghai Machinery Factory Co., Ltd according to the market demand. It is a spindle rotary, diamond bit core rig drilling hydraulically. It mainly applies to metalliferous and/or nonmetallic solid deposits exploration. It could be used widely for exploration and prospecting of geology, metallurgy, coal, hydrological well, engineering and other industries drilling with diamond bit or tungsten-carbide tipped bit. It also could be applied to drilling of shallow layer petroleum, natural gas and sap ventilation, drainage and also for basic pile construction in large diameter etc.The HXY-6/6B core rig could be used for slant and straight holes drilling.It advantages are simple and compact structure, reasonable layout, proper weight, easy to install and disassemble and

In order to meet the current requirement of more deep geological exploration, basing on the models of XY-4 and XY-42, the XY-44 rig,a reformed model,has been designed and produced by Lianyungang Huanghai Machinery Factory Co., Ltd. The XY-44 is in larger drilling capacity. It could be used for engineering geological exploration, hydrological well drilling and construction of foundation projects in large diameter as well, besides applicable to core drilling by mainly using diamond bit or tungsten-carbide tipped bit. The rig is reasonable in structure, light in weight, great in capacity, wide in versatility, stable in property and high in reliability. It is also in a high greed of standardization and generalization.XY-44 Drilling Machine ParameterDrilling Depth750 --- 1400mDrilling Angle0-360°Max. Torque3.2kN.mSpindle Stroke600mmI.D. of Spindle93mmMax. Lifting Capacity of Spindle120kNMax. Pressure of Spindle90kNMax. Hoisting Capacity45kNPower of Engine37kWDimensions(L×W×H