Main parameter of Mesh Belt Type Unmuffled Furnace: Size of working area L*H*D(mm):1500*150*70 Heating power(KW): 24 Productivity (kg/h): 40 Dimension of heating furnace (feeding frame not contained) (mm): 2500*1250*1400 Consumption volume of atmosphere (mm3/h):9

Machinery parts, hardware, implements and other metal parts' annealing, temperature: <=650°C. Even heating temperature, long service life, low rate of fault. The large mixing fan equipped in furnace makes internal temperature even, treating hardness even and good brightness. Workpiece can directly do black treatment in normal temperature. Working temperature: 650°C. Time for variable frequency speed regulation: 30 min~180 min. Main parameter of anneal furnace: Width of mesh belt(mm): 500 Discharging length(mm): 800 Feeding length(mm): 1200 Working length(mm): 4000 Effective height(mm): 100 Working power(KW): 54-100

Reasonable in the collocation of heater in furnace; even and reliable in workpiece's treatment; full-fabric furnace lining applied; lower energy consumption Perfect automatic control system; much safe and convenient; feeding machine, cleaning machine and tempering furnace can be equipped to form automatic production line Working temperature: lower than 950 °C Main parameter of mesh belt muffle furnace Size of working area(L*W*H)(mm):1300*150*50 Heating power(KW): 24 Productivity (kg/h):30 Overall dimension of heating furnace (feeding frame not contained)(mm): 2200*1250*1400 Thickness of muffle board: 4

Main parameter of PVC Coating line Power of direct-current motor:4 kw Exterior size of main machine: 2500*60*1600 mm Weight: about 1300 kg Exterior size of wire drawing frame:3800*900*1200 mm Weight: about 1200 kg Exterior size of wire winding machine: 2000*1400*1100 mm Weight:about 600 kg Total power: 55 kW Exterior size of pay-off reel:1900*450*1000 mm

ABE series consist of the shelf for releasing line, warp-rectified mechanism, mesh welding machine, mesh cutting machine and the shelf for mesh falling materials. It can weld O2 to O12 cold-rolled reinforcing steel with rib, steel wire as well as stainless steel wire. It adopts hydraulic pressure transmission. PLC can compile procedure controlling in order to make the distance of the mesh check accurate and operate conveniently. It can adopt once pressurization, once electrify or once pressurization, three times electrify while welding. The disk of warp release the line, warp rectifying, weft increasing materials, mesh welding, mesh cutting the falling net for the fixed length. All the actions go on successively and automatically. Many types design can satisfy different requirements. ABE series are machinery, they adopt electrical machinery that can change frequency to control electrode servo, electrical machinery control the pulling mesh. It adopts Siemens PLC.

Main parameters: Capstan diameter: 275mm Draw passage: 19dies Max incoming diameter: 1.5mm Min outgoing diameter: 0.15mm Average partial compressibility: 14.5% Wire drawing line speed: 12m/s Motor power: 37KW Dimension: 2950*2700*1580mm Weight: 3500KG

Water Type Wire Drawing Machine LT-15/150-II Main parameters: Capstan diameter: 150mm Draw passage: 15dies Max incoming diameter: 0.6-0.5mm Min outgoing diameter: 0.3-0.2mm Average partial compressibility: 11.5% Drawing speed: 2-16m/s Motor power: 4.0KW Winder Motor Power: 0.75KW Max H-wheel diameter: 160mm Min Axle hole diameter: 20mm Max H-wheel depth: 160mm Dimension: 1500*900*1600mm Weight: 800KG

Water Type Wire Drawing Machine LT-15/450(350) Main parameters: Capstan diameter: 450-350mm Draw passage: 15 times Max lncoming diameter: 3.6-2.5mm Min Outgoing diameter: 1.1-0.8mm Total compressibility: 90% Average partial compressibility: 16% Wire drawing line speed: 6-8m/s Single motor power: 45-75kw Dimension: 3500*1500*1500mm Weight: 3500kg

Big Water Type Wire Drawing Machine LT-12/630 Main parameters: Capstan diameter: 560mm Draw passage: 12 times Max lncoming diameter: 5.5-6.5mm Min Outgoing diameter: 2.0-3.5mm Total compressibility: 90% Average partial compressibility: 17.8% Wire drawing line speed: 4.33m/s Single motor power: 155kw Dimension: 4680*3000*1840mm Weight:16000kg

Pulley Type Continuous Wire Drawing Machine 360-400 Main parameters: Capstan diameter: 360-400mm Draw passage: 6dies Max lncoming diameter: 2.5mm Min Outgoing diameter: 0.9mm Total compressibility: 87% Average partial compressibility: 29% Capstan speed: 70-227r/min Wire drawing line speed: 88-285m/min Single motor power: 7.5-11kw Dimension: 1250*660*2250mm Weight:1.5T

Main parameters: Drawing material: High, medium, low carbon steel wire Incoming wire diameter: 8.0-5.5mm Outgoing wire diameter: 2.5-2.0mm Material strength: <1200/800/500 Total com-pressibility: 85% Wire roller speed: 300m/min Single motor power: 45-30KW Weight: 32000kg Dimension: 12000* 2350*2650mm

The continuous wire drawing machine is a multi drum, multi-die wire drawing machine which is equipped with wire drawing and coiling function. The drum is made of friction resistant material. The surface is ground by spot welding and internal side treated by compulsory water cooling device. The die box is equipped with pressure die for better lubrication and equipped with water cooling device. The gears in the transmission gear box are made of alloy material, finished with heat treatment and grinding in achieving high speed operation with lower noise and high efficiency. The drum speed is controlled by inverter for carrying out non-section speed shift and thus, applicable for drawing steel wires, stainless steel wires, and aluminum-copper wires, etc. Main parameters: Drawing material : Low, or medium carbon steel Drawing capstan diameter: 600mm Wire inlet diameter: Mild 8.0-6.5mm Wire final diameter: 2.4-2.0 mm Drawing speed : 530-700 m/Min Power required/Block : 50 HP