Functions: Detachable module for testing two remote pointsOpen/short wiring testConnected wires displayNo connection/No termination indicatorWrong connection/Non-parallel connection displayEthernet 10Base-2/10Base-5 terminator value detection1394 Firewire CableIndicators:Battery condition LED(green/yellow)No connection/No termination LED(yellow)Connected/25 Ohm LED(green)Short LED(red)S,C/1,2,3,4,5,6,7,8LEDs(yellow)Power:9-volt alkaline batterySize:204×130×50mmPalm size with carrying case

with main tester and remote modular,  capable of the testing of RJ11, RJ12, RJ45 UTP and STP  Cat3, Cat5e, Cat6 cable and the BNC interface are suitable for the testing of Coaxial cable Can test  mistake wiring, reversals, short circuit, and open circuit  of 4 pair-twisted cables of UTP and STP  connection, and test the cable shield Integrity of STP cable.Compliance with  TIA/EIA568A,568B, 10 Base-T, Token Ring.

Application:   The product is suitable for power distributions and control circuits which are used in  AC50/60HZ,rated current100A and below, rated voltage is up to 400V. It can mainly used as the chiefswitch in the terminal combined electrical equipments as well as used for unfrequent control all kinds of small power equipments and lightings.    It is suitable for mining industry, building, business, residence,etc.   It is conformity with GB14048.3,IEC60947-3 standards.Main Technical Data:1. No. of pole: 1p, 2p, 3p, 4p.2. Rated current: 32A, 63A, 100A.3. Rated voltage: 230/400V.4. Icw: 12Ie, t=1s.5. Rated making and breaking capacity Icm: 3Ie,1.05Ue,cosΦ=0.65.6. Rated short-circuit making capacity Icm: 20Ie, 0.1sFeature:1. It is composed of insulation cover, operating mechanism, contact system, etc.2. Compact and modularize design.3. Operation reliability of the product has been greatly enhanced.

RoHS compliance pin header 2.0mm pitch

RoHS compliance fuse holder in difference model

RoHS compliance IC socket 2.54mm pitch