Where to use:For wall surface:To bond ceramic tile (maximum is 60X60cm) on the concrete or cement sand rendering. For floor and ground:To bond ceramic tile or building stone.Advantages: 1. Super bonding power, avoid the hollow caused by ceramic tile which contacted with cement;2. Stable performance, use directly after mix it with water;3. Strong water retention capacity, no need to soak the tile or wet the wall. Reduce the dosage of adhesive and the load on the building;4. Good flexibility, resistant to all kinds of impact;5. Nontoxic, non-radiant, no irritative odor;6. Special anti-sagging formula, easier application.Technical Data:1. Bonding Strength(Mpa): Standard: ≥0.5 After freeze-thaw cycle: ≥0.5After dipped into water: ≥0.5 After heat aging: ≥0.5After airing (20 minutes): ≥0.52. Color: grey3. Packing Size: 25kg/bag(powder)4. Shelf Life: Powder (airtight): 1 year Application Instructions:1. Surface Preparation: ·The surface should be vertical, flat, smooth a

Model: HM01                                            Hot Melt Adhesive  Description: Maydos hot melt adhesive is formulated from excellent materials. it has good characteristics of bonding, dry cleaning resistance, washing resistance etc. Where to Use:Used for different kind of Material, such as bonding the edge of the wood board chips, card board, PVC leather, metal chips and Aluminum materials etc. Features:1) Hot melt adhesive is the adhesive of the present environmental protection2) Does not contain harmful solvent 3) Harmless 4) Excellent climate resistance 5) Fine hot stability, no impurity, and convenient operation  Technical Index:1) Appearance: white and yellow granule2) Shelf life: one year3) R&b Softening point109°C4) Brookf

Description: Maydos Modified SBS Adhesive (AA06) is formulated fromqualified rawmaterials. It has good features such as easy application, rapid drying speed, strong viscosity, anti-ultraviolet radiation after solidification, anti-damp and aging-resistant.Where to Use:It is suitable for bonding different materials. For example, plywood, board, floorboard, wallpaper, veneer, anti-firing plate, fiber, aluminum-plastic plate, leather etc.Features:1. Healthy: benzene free, no hazardous materials and additives, low VOC, protect the applicator and consumers health.2. High solid content: solid content exceeds 34%, much higher than conventional adhesive, effectively save adhesive consumption (dosage) by 30%-40%.3. Antifreeze: no influence at -15 to -20. Easy for transportation andapplication in winter.4. Super initial bonding strength, good penetration property, fast drying. 5. Stable performance: resistant to moisture, impact and water immersion after hardening.Technical Index:Appearance: ligh

Specification:Style: door hingeMaterial: stainless steel (brass, iron, zinc plated steel also available)Finish: satin, goldSize: 4" x 4" x 2.5mm, 4" x 3" x 2.5mm, more sizes availableScrew holes, washer pins and dimension optionalPacking: 1 set per small box50 or 100 sets per carton

Specification:1) Material: cold rolled steel2) Antirust protection layer, epoxy coated static powder3) Colors: brown, coffee, white, black, white4) Optional general wheel, noise absorbing wheel, quiet hidden wheel, durable linen wheel5) Max. load capicity: 25kg6) Self-closing or fixed closing 7) Size/length: 10 - 24" (250 - 600mm); Panel height: 86mm8) Optional installation screws9) Installation gap: 25mm, 12.5mm/side10) With flange 11) Bottom mountOuter packing: 25sets/ctn

Model: PA01 (for assembly line) PA02 (for handwork)Description: This kind of product is colorless and semi-transparent, which owns characteristics such us non-yellowing, easy application, rapid drying speed, powerful viscodity,ultraviolet radiation resistant after hardening,anti-damp and aging resistant. Where to use:Mainly used for PVC, PU, TPR, corium, flannel, rubber, furniture, sports material, and leather etc. Better on oil resistance, lower odor and shorter operation time than that of other PU adhesives in the market, Features:1 .Oil resistant and anti-skidding performance;2. Good performance of initial bonding; 3. Good light stability, cold resistant,low odor and low moisture absorption.Technical Index:Appearance: Colorless and semi-transparent liquidViscosity: 1600-1800 cp.s/25(PA01); 1800-2000 cp.s/25(PA02)Solids Content: 13%-15%Shear Strength: ≥1.8MPaRemoving Strength: ≥600N/cm2Specific Gravity: 0.85kg/LVOC: ≤750g/LSolvent type: Compound of Toluene, MEK, etc.Dosage: