Features:1.Core capacity: 12-96cores2.GJS-3001 is provided with 4-inlet/outlet ports suit for single fiber cable with max. diameter Ø13mm. Ø12.5mm elastic seal ring (which can shrink to Ø7mm)  can be installed in all the inlet/outlet ports. The inlet/outlet ports could be decided according to quantity and diameter of cable, the corresponding port plugs should be taken away. While inserting fiber cable, please choose corresponding elastic seal ring and gasket according to the diameter of fiber cable. 3.The fittings provided : 2pcs of special wrench, earthing wire, nylon tie, labeling paper, desiccant, 4pcs of elastic ring Ø12.5mm, 4pcs of Ø16.5mm plastic gaskets. 4.Accessories for customers' selection: earthing deriving device, pressure testing valve, buffer tube for bunchy fiber,1 set wall mounting bracket.

Features:1) The distribution unit can have LC, SC, ST, FC adapter front panel to meet with customers various needs. The installation is very easy2)  Based on the advanced formula, the plastic parts is made of injection-molded, high- strength engineering plastic PC. It ensures long-term reliability and usage under ambient temperature -40 degrees ~ +65 degrees3) It can be used for wall-mounting and pole-mounting application. It saves the cost for FTTH application and improves quality of telecommunication4) GJS-5001 is provided with 6 inlet/outlet ports5) Max. capacity: 96 fibers, max. 24pcs of adapters6)Outside dimension(L*W*H):385*248*120mm

Features:1) Vertical type2) Hoop is used to fix and seal FOSC cover and base3) Provided with 3 single fiber entry / exit ports and 1 large ports which can accommodate 2 pieces of fiber cable with max. diameter 30mm simultaneously. While straight-through fiber cable is for branching application, fibers uncut are for straight-through after being fixed and winded, fibers cut off are for branching after fusion splicing with fibers of other branching fiber cable 4) Simple installation5) The FOSC is suitable for protecting fiber cable splices in straight-through and branching applications6) Can be placed in aerial, underground, wall-mounting and handhold-mounting and duct-mounting application7) Based on an advanced formula, the plastic parts are made of injection molded,high-strength engineering plastic PC by numerical control equipment8) Effectively prevent products from aging caused by coldness, heat, oxygen and ultraviolet radiation9) Ensures long-term reliability and usage under ambient

Features:1) Advanced internal structure design, fiber suffers no attenuation2) The closure is spacious enough for winding and storing fibers 3) Fiber optic splice trays (FOST) are designed in SLIDE-IN-LOCK and its opening angle is above 90 degrees, the curved diameter meets with international standard4) Easy and fast to increase and reduce FOST5) Innovative elastic integrated seal fitting6) Straight-through and reserved fibers with protective coat can be winded into fiber holding tray easily and neatly7) The FOSC base is provided with an oval entry/exit tube, which can accommodate 2 pieces of fiber cable with max. diameter of 13mm simultaneously 8) While straight-through fiber cable is for branching application, fibers not cut off are for straight-through after being fixed and winded, fibers cut off are for branching after fusion splicing with fibers of other branching fiber cable.All of the above features make it more easy and convenient for installation,maintenance and reuse, therefo

Features: 1) Advanced internal structure design 2) The closure is spacious enough for winding and storing fibers 3) Fiber optic splice tray (FOST) is designed in slide-in-lock and its opening angle is above 90 degrees 4) The curved diameter meets with international standard 5) Easy and fast to increase and reduce FOST 6) Innovative elastic integrated seal fitting 7) More easy and convenient for installation, maintenance and reuse

Features: 1) Advanced internal structure design2) Easy and fast to fix fiber cable3) Easy to re-enter, it never requires re-entry kits4) The closure is spacious enough for winding and storing fibers5) Fiber optic splice tray (FOST) is designed in slide-in-lock and its opening angle is above 90 degrees6) The curved diameter meets with international standard7) Easy and fast to increase and reduce FOST8) Innovative elastic integrated seal fitting makes it more easy and convenient for installation, maintenance and reuse9) If required, the earthing deriving device can be installed on the housing of FOSC for deriving metallic parts of fiber cable for earthing connection10) Pressure testing valve can be installed as well for pressure testing and sealing testing after injecting air

Features:1) Vertical type2) Hoop is used to fix and seal FOSC cover and base3) Provided with 4 fiber entry/exit ports4) Simple installation5) The FOSC is suitable for protecting fiber cable splices in straight-through and branching applications6) Can be placed in aerial, underground, wall-mounting and handhold-mounting and duct-mounting application7) Based on an advanced formula, the plastic parts are made of injection molded, high-strength engineering plastic PC by numerical control equipment8) Effectively prevent products from aging caused by coldness, heat, oxygen and ultraviolet radiation9) The strong housing and main components provide fire resistant, waterproof, and quakeproof properties while protecting splices during pulling, torsioning and impacting10) Ensures long-term reliability and usage under ambient temperature from -40 to + 65degree11) Advanced internal structure design12) Fiber suffers no attenuation13) Designed in Slide-In-Lock and its opening

Features:1) Up-down bisection GJS-6011) Arc, horizontal type3) Innovative insert plates and fixing bolts used to fix and seal FOSC4) Simple installation5) FOSC is suitable for protecting fiber cable splices in straight-through and branching applications6) Can be placed in aerial, underground, wall-mounting and wall-mounting in hand hole and duct applications7) Based on an advanced formula8) Plastic parts are made of injection-molded, high-strength engineering plastic PC by numerical control equipment9) Can effectively prevent products from aging caused by coldness, heat, oxygen and ultraviolet radiation10) The strong housing and main components provide fire resistant, waterproof and quakeproof properties while protecting splices during pulling, torsioning and impacting11) Ensures long-term reliability and usage12) Works under ambient temperature from -40 to 65 degree13) Advanced internal structure design14) Easy and fast to fix fiber cable15) Easy to re-enter