Product descriptionPTFE sheet or strip is made by cutting moulded PTFE roughcast. It has fine features as good electric-conductivity, best anti-corrosion and widely range of using strengths.Product usageInsulation baffle plate and lining board of large area,insulation of wires and cables,the agitated reactor of heat exchanger, the lining of compensator,etc.Product scopeNameThickness(mm)Width(mm)Length(mm)Skived sheet0.3~8.0≤2000≥500Skived tape0.5~6.0≤500≥500Directional film0.03~0.8≤150≥500Main technical indexPropertiesUnitSkived SheetSkived TapeDirectional Filmtensile strengthMPa1620≥30elongation at rupture%180250≥60AC breakdown voltageKv/mm1.81.812

  Product descriptionPTFE sheet or strip is made by cutting moulded PTFE roughcast. It has fine features as good electric-conductivity, best anti-corrosion and widely range of using strengths.Product usageInsulation baffle plate and lining board of large area,insulation of wires and cables,the agitated reactor of heat exchanger, the lining of compensator,etc.Product scopeNameThickness(mm)Width(mm)Length(mm)Skived sheet0.3~8.0≤2000≥500Skived tape0.5~6.0≤500≥500Directional film0.03~0.8≤150≥500Main technical indexPropertiesUnitSkived SheetSkived TapeDirectional Filmtensile strengthMPa1620≥30elongation at rupture%180250≥60AC breakdown voltageKv/mm1.81.812

Product specificationSpecification of PTFE moulded tube/pipe (Unit: mm)DiameterWall thicknessToleranceLengthTolerance10~150≥1.5± 0.20≤180± 2150~350≥4± 0.35≤200± 2350~1000≥8± 0.60≤200± 3Specification of PTFE pushing tube or pipe (Unit:mm DimensionOuter DiameterToleranceWall ThicknessToleranceLength24×224±  0.652.0±  0.30≤1200025×22529×22929.6×229.632×232±  0.802.0±  0.3032×3.5323.5±  0.3840×2402.0±  0.3040×4404.0±  0.3850×45050×550±  0.805.051×251±  0.952.0±  0.3052×452±  0.954.064×2.5642.5≤800064×4.5644.581×2.5812.582×2.5822.582×3823.090×390±  1.103.0±  0.30≤800090×5905.0104×31043.0129×3.5129±  1.203.5± 

PTFE pipe is formed by pushing and moulding. Pushing Pipe uses corrosive medium fluidpipeline, insulation sheath and drive shaft. Moulded pipe can be made into non-standard parts by mechanical working, also it can be used as non-sticking materials.It can be used at the temperature of -180°C to +260°C. It has the lowestfrictional factor and the best anti-corrosive property among the known plastic materials.For more information please visit our website.