|
|
Sinopec Jianghan Petroleum Administration
|
|
|
|
|
 |
 |
| | |  [2008-09-18] Features: 1. The pumping unit with dual horsehead is a new type unit developed on the basis of conventional unit, which has features of low stroke, low power consumption and high efficiency as well as feature of conventional units. 2. A rear horsehead of which curvature radius is variable is designed at the rear end of walking beam. Flexible connection is designed between the rear horsehead and equalizer so that the pumping unit is a variable four-bar linkage to change torque curve of load on the polished rod for better congruence with the balanced torque curve. This will reduce the net torque peak value of gear reducer, eliminate minus torque and lower motor power. 3. Flexible linkage eliminates 90° "dead angle constraint" occurring on the conventional unit and faxed four-bar linkage. The pivot angle of walking beam increases by a factor of 30%~50%. 4. There are two working styles: the rotor angle of crank in upstroke is bigger than that in downst | | | | | [2008-09-18] Features 1. Conforming to API Spec. 11E. 2. Rational construction, smooth running, low noise and easy operation. 3. Walking beam made of box or welded H steel beam with high strength, gook rigidity and heavy capacity. 4. Gear reducer using helical involute or double circular-arc gears with heavy duty and long service life. 5. Central bearing and equalizer bearing feature heavy duty and reliable seal by adopting medium and wide series roller bearings. Self-aligning bearing is used on equalizer and crank pin to reduce mounting error and operating vibration. 6. Horsehead with swinging device move side, hanging, auto-positioning or upwards, is flexible and convenient for well workover. 7. Tower samson post with good steadiness and easy installation. Large post can be contracted for packing and transportation. Machinery >> Mining Machinery | | | | | [2008-09-18] Series piston pumps include triplex and quintaplex piston pumps composed of power end and fluid end. The pumps are featured by small space ,light weight, high pressure and high displacement, is your first choice pump for portable mud circulating equipment. Model3NB-5003NB-8005NB-8005NB-10005NB-1300Max braking HP(kW)500(380)800(600)800(600)1000(745)1300(970)Max load,connecting rod lbf(kN)54000(240)121275(539)65250(290)----Stroke mm203.28203.28203.28203.28203.28Gear ratio5.61916.2715.04316.35316.3531L×W×H (mm)96.06×66.93×40(2440×1700×1016)107.44×65.12×46.54(2729×1654×1182)98.2×78×43.94(2494×1980×1116)90.43×87.4×45.75(2297×2220×1162)90.43×87.4×45.75(2297×2220×1162)Weight lbs(kg)7452(3380)11938(5415)12264(5563)17637(8000)17637(8000) Energy >> Others | | | | | [2008-09-18] Equipped with 2" fixed and adjustable flow nipples,bypass valve, two upstream separation valves, two down stream separation valves. The flow nipples made in English system can be interchanged with products of the countries. Energy >> Others | | | | | [2008-09-18] Drilling fluid manifolds are to collect drilling mud discharged from mud pumps, then mud will be delivered to downhole and mud guns, via pump combination manifolds and high pressure stand pipes. Thus drilling mud can be circulated in both ways. Various mud manifolds for various rigs are available in SJ.Material for mud manifolds conforms to API 5L/GB8163-99, and piping will be designed as per ASME B31.3. Main ParametersTypeDrilling Fluid Manifoldsworking pressure psi(MPa)500010000(3570)nominal size3in.5in.working temperature-29121specification levelPSL2PSL4material classDDFFworking mediummud, oil, natural gas Energy >> Others | | | | | [2008-09-18] We provide series of high pressure integral fittings and welded fittings, including Wyes, Elbows, Tees, Crosses, Laterals and Fishtails, with sizes ranging from 2" to 4"and pressures from 3000psi to 20000psi(21MPa to 140MPa). The integral connections made of high strength alloy steel are all heat-treated to enhance load-bearing capacity and lengthen service life. They may have union ends for easy connection with various cementing or fracturing equipment, or have a welded end connector which is designed as per API Spec 6A. Crossovers are used for connection between different size or thread pipes. They are forged of high strength alloy steel, and machined by NC machine tools. We can provide various types of crossovers as per customers' requirements. Energy >> Others | | | | | [2008-09-18] A sand blender is a major unitized equipment for blending, agitating and feeding of sand fluid for fracturing operations. A HSC100 sand blender can provide sand fluid enough for several fracturing packages. It is fully hydraulically driven, and the power comes from deck engine and chassis PTO. Four sets of oil pumps are powered by the deck engine through a transfer case, and then hydraulic motors driven by the four oil pumps will perform relevant work: including sand feeding, agitating, blending, dry additive operation and raising of sand feeder. Two sets of oil pumps are powered by the chassis engine via a drive line connecting with transfer case, and then the motors driven by the two oil pumps will make suction and discharge pump work. It is a unitized equipment for heavy duty fracturing operations. International well-known heavy duty chassis with good cross-country capabilities. Full hydraulic driving. The power of operating parts comes from Energy >> Others | | | | | [2008-09-18] A HS40 sand blender is a widely used for various fracturing operations, and work together with fracturing trucks and instrument vans.It is a unitized equipment for Medium and light duty fracturing operations.Full hydraulic driving. The power of operating parts comes from deck engine, and installed power is up to 422HP.It can be equipped with many automatic control system, including liquid level control, density control, liquid additive control, and discharge control system. Main Parameters:ModelHS40Max displacement of sand pump bbl(m3/min)40(6)Max. working pressure psi(MPa)0.5(70)Max feeding capacity of sand feeder ppm(kg/min)3520(1600)Displacement of three liquid additive systems gpm(L/min)50(189)Volume of blending tank bbl(m3)9.4(1.5)Overall dimensions in.(mm)VOLVO1240VETotal weight lb(kg)50705(23000) Energy >> Others | | | | | [2008-09-18] YLC105-1340 fracturing truck equipped with 3ZB105-1340 triplex fracturing pumps, is suitable for shallow, medium and deep well fracturing operations in oil and gas fields, with maximum pressure up to 105MPa. It is mainly composed of chassis, deck engine, hydromechanical transmission, triplex plunger pump, high & low pressure manifolds and hydraulic/air control system. Suitable for pumping operations for different fluids,including fracturing with prop frac fluid, acidizing, high pressure pumping and pressure testing. Remote control box, instrument van and network control technologies will ensure reliable and safety fracturing Operations. Equipped with double overpressure protection device. Main Parameters: ModelYLC1051340Max working pressure psi(MPa)11690(105)Max working displacement gpm(L/min)610(2309)Plunger pump 3ZB105-1340Max. input power of pump hp(kW) 1800(1340)Chassis available Kenworth,StyreOverall Energy >> Others | | | | | [2008-09-18] BYJ-100 snub rigs, with full hydraulic driving system and electric / hydraulic control, are powered by diesel engine. During operation, firstly, to close the traveling slips and upper BOP, and clamp tubings; Then to open the fixed slips and lower BOP, and raise the traveling system ( traveling slips, upper BOP and well fluid sealing cylinder ) by one tubing distance using main cylinder; Then to open traveling slips and upper BOP, and the traveling system will drop, then remove one tubing which will be sent to ground through balance winch. Repeat the above procedure until completion of pullout of tubing and downhole tools ,and then close full-seal BOP. This process eliminates dynamic friction between BOP and tubings which happen in old way, thus service life of sealing parts will be greatly lengthened, and operation cost is reduced. New equipment, new process, environmental protection, high effciency. Fu Machinery >> Mining Machinery | | | | | [2008-09-18] XJ450 workover rig is mainly used for medium & shallow well workover , oil testing, fishing and pump check operations. It is equipped with a lifting system and a rotary operating system. It is widely applied in many fields. It can be used for workover, lateral drilling and water well drilling operation if equipped with a rotary table and relevant parts. Featuring reasonable layout, compact structure, easy transportation, convenient operation and maintenance. Technology characteristic: 102.69 ft ( 31.3m ) double section mast, hydraulically raised and telescoped. 10×8 self-propelled chassis. A hydromatic brake is often used, and Eaton water-cooled brake or air tong brake is also available. 5 forward 5 reverse speeds rotary drives equipped with torque release device. Rod hanger is available.Main Parameters: Machinery >> Mining Machinery | | | | | [2008-09-18] XJ250 workover rig is one of light-duty self-propelled rig, and mainly used for shallow well workover , oil testing, fishing and pump check operations. It is equipped with a lifting system,single drum drawworks, hydraulically raised double or single mast and famous engine and ALLISON hydromechanical transmission. It is easy for transportation and convenient for installation, operation and maintenance. Technology characteristic: 68.90 ft ( 21m ) double section mastor 59.06 ft ( 18m ) single section mast. 6×6 full drive chassis, fast movement, good cross-country capability. Double drum drawworks, band brake,without auxiliary brake. Mast base and simple operation platform are hanged on the rear. Rotary driving system can be equipped. Main Parameters: ModelXJ250Service depth (2-7/8" UE tubing) ft(m)10500(3200)Workover depth (2-7/8"DP) ft(m) Machinery >> Mining Machinery | | | | | [2008-09-18] XJ150 workover rig is the smallest self-propelled rig, and mainly used for shallow well workover , oil testing, fishing and pump check operations. It is equipped with a lifting system, single drum drawworks, single mast, engine and hydromechanical transmission, without a rotary system. It is easy for transportation and convenient for installation, operation and maintenance.Technology characteristic : 52.49 ft (16m) or 59.06 ft (18m) single section mast. 6×6 full drive chassis, fast movement, good cross-country capability. Single drum drawworks, band brake,without auxiliary brake. Mast base and simple operation platform are hanged on therear. Hydraulic rotary table is available. Main Parameters:ModelXJ150Service depth (2-7/8" UE tubing) ft(m)8530(2600)Nominal hook load lb(kN)67440(300)Max Hook load lb(kN)131508(585)Wireline Machinery >> Mining Machinery | | | | | [2008-09-18] ZJ15CT trailer-mounted drilling rig is a kind of economy type trailer- mounted drilling rig that designed and manufactured using the mature technologies of light duty truck-mounted drilling rigs. It is fitted with reliable diesel engine and transmission, 111.55' (34m) telescoping mast, double wheel three-axle semi-trailer. Several patent technical designs and configuration, such as double fast line, hydraulic caliper type auxiliary brake, are optional. The rig has following features: reasonable layout, low cost for mobilization, easy site installation, reliable operation performance, and easy maintenance. The rig suits short operating cycle, frequent mobilization drilling operation of shallow well within 4,920' (1500m) and workover service within 9,840' (3000m). Cummins diesel engine. Hydraulic transmission. Special semi-trailer chassis with fast transportation and low transportation cost. Air-controlle Machinery >> Mining Machinery | | | | | [2008-09-18] ZJ10 truck mounted drilling rig is the earliest light duty self-propelled truck-mounted drilling equipment. After several years' technical progress, the products become more and more mature and reliable. Several patent technical designs and configuration, such as double fast line, hydraulic tong type auxiliary brake, are optional. The rig has following features: reasonable layout, low cost for mobilization, easy site installation, reliable operation performance, and easy maintenance. The rig is especially suitable for short operating cycle drilling operation of shallow wells within 3,280' (1000m). The rig can also be used for water well drilling. Optimized for drilling and workover operations of shallow wells. CAT/DETROIT diesel engine. Allison hydromechanical transmission. 10×8 reinforced chassis, fast transportation and good cross-country capacity. Machinery >> Mining Machinery | | | | | [2008-09-18] This compressor is designed to directly motor-driven and balanced opposed 2 throws and 3 stages, with electronic soft start device and visual intelligent control system. An independent lubrication system is used for the crankshaft and connection rod to ensure pre-lubrication. The cylinder is forced to lubricate by the divider valve to adjust lubricant flow accurately. The frame is configured with discharge buffer, filter, automatic drain and unloader at each stage. The compressor, as its wider suction pressure range and large capacity of single unit, is suitable to use at any base gas-filing stations for automobiles using compressed natural gas. Suction pressure: 0.8-1.5 MPa Discharge pressure: 25 MPa Discharge temperature: 15°C lower than ambient temperature Capacity: 1450~2600 Nm3/h The compressor features low vibration, low noise, easy operation and mai Energy >> Others | | | | | [2008-09-18] This compressor is designed to directly motor driven and balanced opposed 2 throws and 4 stages, with electronic soft start device and visual intelligent control system. An independent lubrication system is used for the crankshaft and connection rod to ensure pre-lubrication. The cylinder is forced to lubricate by the divider valve to adjust lubricant flow accurately. The frame is configured with discharge buffer, filter, automatic drain and unloader at each stage. Air or natural gas may be used as air/gas supply of control system. The compressor, as its wider suction pressure range and large capacity of single unit, is suitable to use at any conventional gas-filing stations, base stations and substations for automobiles using compressed natural gas. Suction temperature: Ambient temperature Suction pressure: 0.35~0.8 MPa Discharge temperature: 15°C lower than ambient temperature Disc Energy >> Others | | | | | [2008-09-18] This compressor is designed to directly motor-driven and balanced opposed 2 throws and 4 stages, with electronic soft start device and visual intelligent control system. An independent lubrication system is used for the crankshaft and connection rod to ensure pre-lubrication of the unit. The cylinder is forced to lubricate by the divider valve to adjust lubricant flow accurately. The frame is configured with discharge buffer, filter, automatic drain and unloader at each stage. Air, bottled nitrogen or natural gas may be used as air/gas supply of control system. The compressor is suitable to use at any gas-filing stations for automobiles using compressed natural gas. Suction temperature: Ambient temperature Suction pressure: 0.15-0.35 MPa Discharge temperature: 15°C lower than ambient temperature Discharge pressure: 25 MPa Capacity: 420~740 Nm3/h &nbs Energy >> Others | | | | | [2008-09-18] 1. The structure featuresSKG series bit is of O-ring sealed roller bearing structure, it is the ideal and economical tool for high RPM drilling applications. Its main characteristics include: a. Sealed roller bearing structure, rollers are arranged in recesses in the cone body and therefore size of the bearing journal is enlarged, so that it can adapt for higher WOB and RPM.b. Surfaces of the thrust bearing couple are specially treated for decreasing friction and increasing rigidness, load capacity of the bit and anti-galling ability of the bearing are consequently improved. 2. Available sizes and types of SKG series roller cone bits Energy >> Others | | | | | [2008-09-18] KingMight E series roller cone bit is developed on the basis of Kingdream FJ series product, and it is such a new series bit that combines special T and S features as well as head OD active gage protection and side cutting technologies. It is suitable for high RPM and high WOB drilling applications and features long service life, and is the ideal tool for drilling directional wells, horizontal wells and high temperature deep wells. A. Main structure features1. Floating bearing structure. The floating elements are made of new materials with high strength, high elasticity, high wear resistance and can endure high temperature, and bearing surface is treated with solid lubricant. This decreases the relative linear velocity of the bearing couple and reduces the temperature of the friction surfaces, which result in improved reliability and working life of the bearing under large WOB and high RPM conditions.2. Precise metal face sealed. The two dynamic axial sealing rings of the sealing syste Energy >> Others | |
1 2 Next
show 1 ~ 10 of 28 Total 2 pages |
|
|
|
|
|
 |
|
|
|
|
|