Model:JLA-31 EEC1) Engine type: 4-stroke, single cylinder, air-cooled2) Efficient capacity: 292.4ml3) Transmission: chain drive4) Starting system: electric5) Gearshift mode: 5-speed, manual/reverse6) Brake system front/rear: disc/disc7) Ignition: CDI8) Steering angle: 309) Compressing ratio: 9.2 : 110) Fuel tank: 7.5L11) Bore x stroke: 2-53 x 53mm12) Tire (front/rear):22 x 8-7-10/22 x 10-1013) Rated power and rotate speed: 12.5kW/8,500r/min14) Max. torque and rotate speed: 15N.m/7,500r/min15) Max. speed: 60km/h16) Dimensions (L x W x H): 1,900 x 1,050 x 1,150mmConveyance:Qty/20' FCL: 12pcsQty/40' FCL: 24pcs

Model:JLA-21B EEC1. engine type :200cc/250cc,4 storke, Air Cooled.2. max torque : 13.5Nm/5500rpm, 17.5Nm/5000rpm3. max power :10kw/7500rpm,11kw/7500rpm4. ignition type :CDI5. transmission :manual clutch,4-speed,reverse gear,chain6.Brake (Front/Rear):Drum /Disc7. starting system :Electric start8. battery spec :12V,9AH9. front suspension details :double A x swing arm,:air chamber shock absorbers10. rear suspension details :inner ballonet absorber11. front tire spec : 21 x 7 - 10 rear tires spec : 20 x 10 - 1012. vehicle dimensions :180 x 112 x 113cm13. wheel base :115cm14. seat height from ground :88cm15. ground clearance :120mm16. load capacity :155kg17. fuel tank capacity :4L18. gross weight in carton :170kg19. net weight :155kg20. packing size:148 x 95 x 88cmConveyance:Qty/20' GP: 22 unitsQty/40' GP: 44 unitsQty/40' HQ: 66 units

Model:ZB100Discharge capacity:163mlFlow:80m3/hSuction length:8mLift length:20mWater outlet diameter:100mmMating power:168FNet weight:32kgPackage dimensions:580x390x460mm

Model : DG5500SEEngine:UD186, 10.0HPDescripition:diesel silent type generator with full protection and lower noiseSpecification:230V/50HZ, two 32A 2P+E UK sockets, 12V DC, voltmeter,16L fuel tank, electric start Output (kW):Con.:4.2 Max.:4.6  Dimension (LxWxH) (mm):955*575*865G.W.(kg):185.00 Certificate:N/AQuantity Per Container:20':7240':144Minimum Order:30pcs40HQ:156

Model :GP80Suction:3.0inch/80mmDescripition:Powered by gasoline engine UP168, Highly effective mechanical seal;Big volume water discharge;Aluminium alloy high pressure casting.Specification:max. capacity: 60m3/h,Self-priming Times(s/4m):120Max. Head: 28mSuction Head:8mDimension (LxWxH) (mm):517*415*452G.W.(kg):30.00 Certificate:CE, EC-II,EPAQuantity Per Container:20':30540':625Minimum Order:30pcs40HQ:704

Model :DP100ESuction:4.0inch/100mmDescripition:Powered by diesel engine UD186, Highly effective mechanical seal;Big volume water discharge;Aluminium alloy high pressure casting.Electric starter.Specification:max. capacity: 96m3/h,Self-priming Times(s/4m):180Max. Head: 16mSuction Head:8mDimension (LxWxH) (mm):662*490*642G.W.(kg):72.00 Certificate:CEQuantity Per Container:20':12040':252Minimum Order:30pcs40HQ:336

Model :DHP40E-2Suction:1.5inch/40mmDescripition:Powered by diesel engine UD186; High pressure water discharge canreach more than 55m;Aluminium alloy high pressure casting.Twin-impeller pump;Electric starter.Specification:max. capacity: 13.5m3/h,Self-priming Times(s/4m):44Max. Head: 77.5mSuction Head:2mDimension (LxWxH) (mm):662*490*642G.W.(kg):51.00 Certificate:CEQuantity Per Container:20':12040':252Minimum Order:30pcs40HQ:336Unit price:US$375.00 (FOB Fuzhou)

Frequency(Hz): 501-Phase Reated AC Voltage(V): 230Rated AC Output Power(kw): 2.0Max. AC Output Power(kw): 2.2Starting Mode: Recoil StartEngine: DJ168F, 4 stroke, air-cooling, single cylinder, OHVDisplacement(cm3): 196Ignition Mode: Transistorized MagnetoMax Output Power(HP/rpm): 6.5/3600Fuel Tank Capacity(L/gallon): 15/3.96Oil Capacit(L/gallon): 0.6/0.16Continuous Working Time(h): 13Noise Level(7m)(dB): 68Two 230V sockets, Voltage meter, New AVR system(Auto Voltage Regulator), Alert system of low oil level, Circuit breaker, 12V DC output, 25mm round frame

Engine Blower & vacuum blowerModel No.: EB600A Average Air Volume: 0.3cbm/S Net Weight: 11.5kg Discharging Capacity: 56.5ml Mating Power: 1E46F-3 oil engineStandard Power:2.5/7300kw/r/minPackage Dimensions: 495x385x485mm Quantity of 20'container:300pcs

Model:HZR86ADischarge Capacity:181LImpact Number:5800-600rpmPress depth:30cmPower:4.4kwMating power:Mitsubish GT600

Model: HQL450Net weight: 130kgBlade diameter: 450mmMax cutting width:12mmMax cutting depth:162.5mmMax power:13HpMating Power: MITSUBISH GT600Type of Engine:Single cylinder,Air cooled,4 Stroke.

Model: HQL450ANet weight: 96kgBlade diameter: 450mmMax cutting width:2.5-5.0mmMax cutting depth:155mmMax power:13HpMating Power: MITSUBISH GT600Type of Engine:Single cylinder,Air cooled,4 Stroke.

Model:NIE-2SPK-300Voltage:230V/50HZInput power:300WNo.load speed:10000rpmCutting tool length:26cmNet/gross weight:9kg/11kg/4pcs/cartonPacking:64.5x42.5x24cm/4pcs/cartonQuantity of 20'container:1700pcsQuantity of 40'container:3524pcs

Model:IG1000TiEngine:144FDischarge capacity:53.2mlType:Air-cooled,4 stroke,OHV Single cylinderMax. Output:1.5kw/6500r/minLgnition system:TransistorFuel tank cpacity:2.1LNoise:64Db/7mGENERATORA. C. Frequency:50/60 HzRated AC Voltage(V): 230,120/240Rated electric current:3.9A,7.5A,3.8ARated AC output(kw): 0.9Max.AC output(kw): 1.0DC output:12V  8ANet weight:15.3kgsSize :480x260x380mmPacking dimension:490x275x405mm

The character of a abrasive products includes the shape,dimension,abrasive,grit No.hardness,structure and bond,the following is the description.Hardness:The hardness means the strength with which the bond abrasives together,or the degree to which abrasives release from the wheel under the action of outside pressure in the course of grinding.A suitable hardness of grinding wheel should be selected in according with the works to be processed.Bond:The bind is mainly intenbed for holding the abrasive together so that the bonded wheels have got finite shapes and necessary strength.

The character of a abrasive products includes the shape,dimension,abrasive,grit No.hardness,structure and bond,the following is the description.Hardness:The hardness means the strength with which the bond abrasives together,or the degree to which abrasives release from the wheel under the action of outside pressure in the course of grinding.A suitable hardness of grinding wheel should be selected in according with the works to be processed.Bond:The bind is mainly intenbed for holding the abrasive together so that the bonded wheels have got finite shapes and necessary strength.

The character of a abrasive products includes the shape,dimension,abrasive,grit No.hardness,structure and bond,the following is the description.Hardness:The hardness means the strength with which the bond abrasives together,or the degree to which abrasives release from the wheel under the action of outside pressure in the course of grinding.A suitable hardness of grinding wheel should be selected in according with the works to be processed.Bond:The bind is mainly intenbed for holding the abrasive together so that the bonded wheels have got finite shapes and necessary strength.

The character of a abrasive products includes the shape,dimension,abrasive,grit No.hardness,structure and bond,the following is the description.Hardness:The hardness means the strength with which the bond abrasives together,or the degree to which abrasives release from the wheel under the action of outside pressure in the course of grinding.A suitable hardness of grinding wheel should be selected in according with the works to be processed.Bond:The bind is mainly intenbed for holding the abrasive together so that the bonded wheels have got finite shapes and necessary strength.

Name:rock drillModel No. Y26weight:26kgLength:650mmCylinder dia Piston stroke :65x70mmair pressure:0.4-0.63MpaImpact energy: ≥30JImpact frequencey :≥23HZAir consumption:≤47L/sWooden Case:78x35x25cmN.W:28kgs G.W:35kgs