It is corrugated board converting equipment for case forming, which is designed of manual fold and feed, and automatic glue application on glue lap and compression forming, suitable for single wall and double wall board. It is ideal substitute for stitcher. Features: 1. Lift feed table with footswitch control. 2. Manual fold and feed, automatic glue application on glue lap. 3. Idle wheel glue application, with self flow compensation, ensures no glue breaking during running. 4. Side baffles squaring, with wind compression forming, provides regular case forming and strong bonding. 5. Single case ejecting or stack ejecting are available. With counter, stacking up to preset value makes binding and output statistics easy.

General 1. One pinwrench adjustment operation throughout the machine, operator friendliness. 2. Upper belt width 20mm(0.79’’), lower belt width 25mm(0.98’’), positive drive. 3. Three-way quick release levers allow instant height setting of upper carriers. It’s easy to clear jams and running E-flute cartons. 4. Position indicator throughout the machine. 5. Electronic batch counter controlled kicker. 6. Overhead mobile control box.

Specification: 1. Used Materials: Cardboard E, B-flute cougated and printed board. 2. Fundamental Pattern : Straight line, Double sides and Crash-lock, Bottom Box. 3. Glue: Emulsion Type. 4. Speed : Max. 200m/min 5. Straight Line working size : Max. 1000mm×700mm, Min. 150mm×80mm 6. Power Required : 9.5KW 7. Machine Weight : 6500KG 8. Machine Measurement : 9690 mm×1632 mm×1700 mm

Automatic Flute Laminating Machine is a new generation of flute laminating machine of high precision based on the merits of similar manufacturers home and abroad.Automatic cardboard and flute sending system suitable for cardboard to cardboard,cardboard to flute lamination(A,B,C,E,F corrugated board).It is really an ideal equipment for all kinds of high-level packing boxes.

Innovative dynamic aligning, synchronized laminating mechanism: Utilizing the speed difference between the faster conveying and front stopper to advance the moving paper to reach the front stopper, and the sides are synchronized to front stopper. The shifting side stoppers are uses to align the two papers during moving, Transmission system; The planet transmission system allows even distribution in power transmission. The whole equipment is in timing belt transmission, free of servicing, low noise and high efficiency.

Features: 1.Automatic feeding of bottom sheet. 2.Normal front feeding of top sheet designed to make the feeding more convenient and lamination more accurate. 3.With flexible front positioning which avoid bottom sheet exceeding the top sheet and adjustable fore-and-aft lamination between bottom sheet and top sheet. 4.Suitable for lamination of paperboard to bottom paperboard above 300g/m², and to A/B/C/D/E flute corrugated cardboard, and corrugated cardboard to corrugated cardboard. 5.Movable lengthened pressing part is alternative for lamination of corrugated cardboard thicker than Flute-B whose length is above 800mm. 6.Pressure-adjustable pressing part is alternative for lamination of paperboard to paperboard.

Automatic Gluer machine is named automatic Folder Gluer as well. After printed and slotted (die cut), single-wall or double-wall corrugated board will be folded and glued by Gluer machine to form carton box. This kind of machine is featured with high speed, pressure resistance, rust-proofing, easy recycle, low cost and no stitching.

General Specifications: 1? Mechanical Shaft-less Mill roll stand 2?Chucking of paper roll, lifting up and down movment, left and right movement are mechanical gear driven. 3? Paper roll size: F1500mm×(1600mm-800mm),Manual braking is provided. 4? Maximum loading of paper: 2000kg per arm. 5? Each arm is equipped with one track of shuttle car for moving paper roll chucking position, so, total 2 rails of track and 2 units of shuttle car, One set of paper roll changer. 6? Chucking head is using “Expandable chucks”, 2 units on each arm will be provided. Total 4 units of expandable chucks. They will eventually reducing the waste

Main Configuration :( lead edge feeding unit, die-cutting unit, stripping unit, strap delivery unit)

This finished product, single wall corrugated board, is mainly introduced as inner packing material. It can be also used as outer packing material for light or small-sized commodities. Four flutes A, B, C and E as well as special customer-tailored flutes are provided. Steam heating system and oil heating system are optional (but oil heating is not suitable for line with speed above 100m/min). The standard three ply line is made up of Single facer (1), mill roll stand (2), preheater (optional in case of speed below 120m/min), conveying bridge (1), glue machine (1), double facer (1), slitter scorer (1) (thin-blade or flaring slitting tool is optional), cut-off (1), stacker (1). Speed of 80m/min, 100m/min, 120 m/min, 150m/min or 180 m/min is offered to meet customer’s requirement.

With this line, single wall and double wall corrugated board can be produced. Besides the application scope of single wall corrugated board, The double wall product is also widely used as packing material in many fields such as TV set, refrigerator, fruit, cigarette, beverage, and so on. Two flute combinations (A&B, C&B) as well as special customer-tailored flutes are provided. Steam heating and oil heating are optional (but oil heating is not suitable for line with speed above 100m/min). The standard five ply line is made up of Single facer (2), mill roll stand (3~5), preheater (4), multiplex preheater (preheating roll diameter should be f900mm for speed above 120m/min), conveying bridge (1), duplex glue machine (1), double facer (1), slitter scorer (1) (thin-blade or flaring slitting tool is optional), cut-off (1), stacker (1). Speed of 80m/min, 100m/min, 120 m/min, 150m/min or 180 m/min is offered to meet customer’s requirement.

With this seven ply line, single wall, double wall and triple wall corrugated board can be produced. Besides the application scope of single wall and double wall corrugated board, the triple wall product is mainly used as motorcycle packing material. Flute combinations from A, B, C as well as special customer-tailored flutes are provided. Steam heating system is introduced. The standard seven ply line is made up of Single facer (3), mill roll stand (5~7), preheater (6), multiplex preheater (preheating roll diameter should be f900mm for speed above 120m/min), conveying bridge (1), triplex glue machine (1), double facer (1), slitter scorer (1) (thin-blade or flaring slitting tool is optional), cut-off (1), stacker (1). Speed of 80m/min, 100m/min, 120 m/min, 120m/min or 150 m/min is offered to meet customer’s requirement.

1. The sheets are fed by two labors. 2. With flexible front positioning which avoid bottom sheet exceeding the top sheet and adjustable fore-and-aft lamination between bottom sheet and top sheet. 3. Suitable for lamination of paperboard to paperboard, and paperboard to A/B/C/D/E flute corrugated cardboard. 4. Movable pressing part is alternative for lamination of corrugated cardboard thicker than Flute-B. pressure-adjustable pressing part is alternative for lamination of paperboard to paperboard.

1?automatic feeding for top sheet and bottom sheet 2?frequency-converting but no-stop of the machine, the main electrical control components adopt imported famous brand products, which ensures the electrical control system correct and stable 3?elastic front register positioning the bottom sheet does not exceed the top one the front-and-back distance between the top sheet and the bottom sheet can be adjusted. 4?suitable for laminating bottom cardboard more than 300g/m2 with top paperboard ,laminating paperboard with A/B/C/D/E flute corrugated cardboard, and laminating corrugated board with corrugated board. 5?when laminating flute B corrugated cardboard and its length is more than 800mm the lengthened movable pressing part is optional. When laminating paperboard with paperboard, pre-adjustable pressing part is optional.

Automatic Flexo Printer Slotter and In-Line Folder Gluer is used to form boxes after the corrugated board is slotted, so that manual gluing and folding are not needed. The machine consists of a gluing unit, auto mastic laminating unit and counter ejector unit. After leaving the slotting unit, the gluing unit will supply glue to the corrugated board flap, and the laminating unit folds the board and laminates it . The edge pressing roller then presses the edges and the steel roller pre-presses it, then after folding, the corrugated boards are reshaped by a shaping board (patting the fronts and back of the boards). Following this, the counter ejector sends out the pile of cardboard and counts the quantity, then binds the pile of cardboard. The gluing, laminating and counter ejector workflow can improve work efficiency and increase the benefits of manufacturers through precise shaping after folding and precise operation of the counter and ejector unit.

The machine is mainly used for the diecutting, creasing and cold embossing of cardboard of cardboard boxes, cartons and trademark labels in the packing and decorating industry. The way of diecutting is flat to flat. The superior performance, excellent quality, easy operation and reasonable price embody its high practicability and economics.

As European models, XHBC1050 series punching & die-cutting machine, die-cutting & stamping machine, and holographic positioning & stamping machine feature high precision, high speed, durability and stable performance. They adopt international leading configuration and have come up to international leading level in performance.

1. All the upper pressing bars are by micro-adjustment to move up and down. Easy and speedy for one person to control. 2. Without shaft removal, belts can be changed rapidly. 3. All import brand name component which ensures high speed, stable, lower noise and longer life. 4. All import original electric component. 5. Original Japanese KOYO bearing. 6. The grinder of the Per-Folder section uses synchronized belt which ensure the duration of the grinder during high speed operation.

Auto paper feeding, adjustable feeding speed, frequency adjustment, high friction rubber-belt transmission, and auto folding. adopt numercial control technology, simple operation ,precise and credible positioning. Adopt extra-high speed, high precision servomotor and high-speed control system. Auto counting, piling in order and auto stacker.