Introduction     ZP rotary machine fits for cultivating cell for manufacturing biological medicine, the main characteristics: bracket of mainframe is made of stainless steel; main motor adopts low noise single phase speed reducing motor; speed can be regulated, numerical display; synchronous belt drive, driving is stable; the whole machine has small cubage, adopts structure that can be dismantled which is convenient for installation and debugging; universal wheel is installed so that the machine can be moved conveniently. Centralized monitoring system, treating single microcomputer as controlling center, can be equipped for our clienteles if necessary.Technical Parameter

Multiple merits     Inner PC-body, upper PC-body and finish cork sorting, cork plugging, lid sorting, lid covering and lid pressing with one machine.      Single cutter type lid pressing and it is controlled by imported PLC.     This machine is specially designed by our company for the PC connector in liquid transporting soft bag. It has the function of multiple function, altering the machine action according to the main body speed. The following procedure without cleaning and disinfection. It uses Chinese operation interface, it is convenient and it is easy to understand. The action is controlled by PLC.      Imported transducer uses stepless speed regulating and can adapt to requirements of various productions.     Use imported PLC+ Cam signal controlling method and the action is correct and reliable.     Automatically detect the nonconformity parts and automaticall

Multiple merits     Imported PLC controlling system, touch screen Chinese human-machine interface.      Imported transducer uses stepless speed regulating and can adapt to cleaning requirements of various production volume and various bottles.      Feeding the bottles in bulk and the operation is convenient and practical.      Use mechanical hand to grasp the bottle. So it can be applied in various specifications of bottles.     Use ultrasonic + tracing inserted water, gas reverse rinsing method to assure that bottle cleaning conforms to GMP requirement.      Use pulse of solenoid-controlled valve to control the cleaning water and gas. So the use level of water and gas is decreased.     There are three work mode: single machine, crawling, combination. So the needs of various makers can be met.Technical Parameters     Production

Multiple merits     Constant pressure fixed amount bottle filling, plastic bottle and glass bottles are interchangeable.     Imported PLC+ touch screen controlling method     The principle of using constant pressure working method in this equipment is that liquid can produce the same pressure with the same height (e.g., Maintain the height of bottle filling). So it uses high sensitivity sensor to detect the liquid level and control the bottle filling time with PLC. It has the characteristic of correct bottle filling volume and convenient operation.     Imported PLC controlling system, touch screen Chinese human-machine interface. It is convenient and rapid to revise the parameters and specifications.     It has precise liquid level control, constant pressure fixed flow passage parameter and can finish precise bottle filling task.     Photoelectric sensor and gas drive

Overview of the machine     This production line can finish the whole process of quantum bottle filling, lid sorting, lid covering, lid rotating, labeling and encoding of Abnormity Bottle Liquid. Quantum with peristaltic pump and control with microcomputer      Patent of this peristaltic pump (patent number: ZL 00 2 2 1453.9).It has the characteristics of rapid liquid discharge, correct quantum, convenient cleaning, disinfecting and dismantling etc. It uses Chinese operation interface. It is convenient and easy to understand. All the actions are controlled by single chip microcomputer. The parameters such as bottle filling volume, liquid discharging speed etc. are controlled by single chip microcomputer. The stepping motor uses original german made product. It is reliable and has not desynchronizing. Characteristics:      In case of labeling type change, the electric eye need not move. All the adjustment can be direc

Working Principle     After being put onto the bottle delivering tray, bottles will be pushed onto bottle pulling tray along with bottle delivering track via rotation of the bottle delivering tray. Under thrust of bottle pulling tray, bottles will enter into the rail, purity and transparency of medicine in the bottle will be checked by magnifier before the bottle under background light of conveyer belt. Finally, bottles will be extruded out of bottle discharging rail, then the whole process is finished. Characteristics      Simple structure, easy to repair and debug, small cubage, high efficiency, stable running, low noise and save energy. Technical Parameters     Applicable spec: Φ12 toΦ30mm     Throughput: 60 to 120 bottles/ minute     Power Supply: three-phase four-wire 380V/50Hz     Power: 0.5kw     Gross Weight: about 200kg   

ZD-200 automatic bottle arranging machine can arrange unorderly cillin bottles andsend them to next procedure, which is main equipment for batch production, especiallyfor reusing bottle and bottle that arranged orderly and the bottle top isupward

Working Principle      After entering into bottle feeding rail, bottles will enter into wax spraying district via bottle pulling tray and turning rail. Now, the bottle will roll on the cushion and there will be space among bottles. Parts that need to be waxed will contact the wax spatula which then will evenly spray wax onto the bottle. Finally, bottles will go out and start another step.Characteristics     Simple structure, easy to repair and debug      Small cubage, high efficiency, stable running, low noise, low wax usage      High-grade airproofing, beautiful appearanceTechnical Parameter      Output: 120 to 300 bottles/minute     Wax spraying height: 8 to 10mm     Power Supply: three-phase four-wire 380V/50Hz     Power: 2.8kw     Gross Weight: about 150kg     Overall Dimension: 1200&t

Working Principle     After being delivered onto conveyer belt, the sequential bottles will be lined with even space by bottle distributing wheel, then sent to the gate, firstly the photoelectric pickup will receive one signal and send one labeling signal to microcomputer controlling system, then the stepping motor will give one label which will be pasted onto the bottle at once, then the bottles will go forward and the rolling device will adhibit the label onto the bottle well. Length of one label will be automatically checked by photoelectric pickup (as one 2mm space exists between every two labels, then the photoelectric pickup can check out the length). After one label is sent out, printing device will finish once printing.Characteristics     Building block type structure, the whole structure is simple and elegant     Principal regulating parts are regulated in the form of lead screw which is convenient and accurate &

Working Principle     This machine adopts main motor to bring the main shaft to circumrotate, then one series procedure will be finished via different machines from delivering bottle, sending bottle, blowing empty ampoule bottle, filling, drawbench and manufacturing bottles. Characteristics     Chain and rectangle driving structure is used, new clutch device is equipped to timely stop delivering bottles under working state greatly lowering wastage of ampoule bottle.      No filling no bottle. Stop if there is no bottle, high performance and long service life .     Bottle overturning and arranging structure are adopted which greatly lower damage rate of ampoule.     Completely new design, adopt rolling bearing and sliding bearing which lower abrasion of parts and enhance precision and service life .Technical Parameters     Power: 0.55kw     Puel con

Working Principle     After being delivered to conveyer belt, bottles will enter into equational tray under function of protection fence and conveyer. Then the bottled will be capped with aluminum cover which then will be rolled well, go out of the rail and the machine to step to next procedure. Characteristics     Beeline design, beautiful and easy to be combined with other machines .     Intelligent design: work when there is bottle, stop when there is not .     Mainframe adopts imported transducer stepless speed regulation with stable and reliable performance .     High electromagnetism is adopted for power twister of screw cover which completely settles the problem that traditional ones has no even force .Technical Parameter     Output: 40 to 80 bottles/ minute     Power: 0.9kw     Power supply: three-phase four-wire 38

Working Principle     Put the substances into drying oven, then the device will finish the work.Characteristics     It fits for drying and sterilizing aluminum cover with small size and multifunction.     The whole process from drying to sterilization is automatically carried out (heating, heat preservation, remove damp and lower the temperature)     Period of heat preservation can be set conforming to requirement.  Technical Parameters     emperature of working chamber: 50-200oC     Power supply: three-phase four-wire 380V/50Hz     Power: 7kw     Gross Weight: about 450kg     Overall Dimension: 1000×800×1200mm3 (length×width× height)

Working principal      Press the button after bottles entering into the drying oven, then the machine will control the whole process conforming to rated program. Press the button after the process is finished, open and door and take away to substances, then the whole process is finished. Characteristics     Fit for different situations for drying and sterilization which can be carried out automatically      Hot blast heating is adopted with low temperature difference      100 grades filter is equipped on top of inlet and outlet part of the drying oven, as well as side of the machine conforming to GMP standard.      The gate is in turn-on form with automatic controlling wedge closing device      Man-machine interface is in the form of touching type LCD with PLC controlling core, PID regulating function is equipped to precisely control the temperature.    

The machine is extensively applicable to quantitative filling and welding sealingfor soft bag packaging. It is a newly-geneeration product from both home and abroad.The empty bag rotates to filling station for accurate filling after beingloaded manually, and then rotates to welding station for welding cap automatically.Meanwhile, it can realize no bag, no filling, no sealing, filling without dripping.It is characterized by reasonable design structure, high production efficency,reliable running, accurate filling, integrated running of machinery, electricity.